Abstract:The strength anisotropy and strain softening of natural soil can significantly impact the bearing capacity of shallow foundations on clay. In this article, we present a nonlocal numerical method to study the coupled rotation of the maximum normal stress axis and strain softening on the bearing capacity of shallow foundations on clay through a Cosserat strain softening constitutive model. The strength anisotropy and strain softening characteristics were numerically implemented into a finite-element (FE) program by dynamically updating the anisotropic cohesion in global Newton–Raphson iterations. Due to its nonlocal feature, the proposed nonlocal numerical method can overcome the mesh dependence in simulating the progressive failure of clay through the classical FE method. We first validated the efficacy of this method against the results of the plane strain test and numerical results in the literature. We then study the bearing capacity of a strip footing over anisotropic and strain-softening clay through the implemented numerical method. The results indicated that the deposition angle has an important effect on the bearing capacity and failure mode. The effects of the degree of anisotropy and strain softening on the ultimate bearing capacity are quantified through the numerical method. It is found that (1) the proposed method can effectively reflect the characteristics of the maximum normal stress axis rotation on the failure surface of the footing; (2) the ultimate bearing capacity of a footing (Pu) on anisotropic clay could increase linearly with an increase in the anisotropy ratio k (i.e., k is the ratio between C1 and C2) and decreases with an increase in the softening modulus; and (3) the strength anisotropy and strain softening are strongly coupling factors impacting the bearing capacity of anisotropic clay.

Geotechnical analysis involving strain localization of overconsolidated soils based on unified hardening model with hardening variable updated by a composite scheme

1-D consolidation of a single soil layer with depth-dependent stress by multi-stage loading

Analytical Solution for the Consolidation of A Composite Foundation Reinforced by an Impervious Column with an Arbitrary Stress Increment

Consolidation Solution for Composite Foundation Considering A Time- and Depth-Dependent Stress Increment along with Three Distribution Patterns of Soil Permeability

Analytical solution for consolidation of composite foundation accounting for variation of soil horizontal permeability coefficient

Consolidation Theory for a Composite Foundation Considering Radial and Vertical Flows Within the Column and the Variation of Soil Permeability Within the Disturbed Soil Zone

An Analytical Solution Of 1-D Finite Strain Consolidation Of Saturated Soft Clay Under Multistep Linear Loading

Large Strain Consolidation Stochastic Finite Element Method for Soft-clay Road Embankment Analysis

Unified Modeling of the Influence of Consolidation Conditions on Monotonic Soil Response Considering Fabric Evolution

Stability Analysis of Overconsolidated Unsaturated Red Clay Slope Based on Modified UH Model

Loading–unloading judgement for advanced plastic UH model

Large-Strain Elastic Viscoplastic Consolidation Analysis Of Very Soft Clay Layers With Vertical Drains Under Preloading

Study Of Flexural Response In Strain Hardening Cementitious Composites Based On Proposed Parametric Model

Solution of One-Dimensional Finite-Strain Consolidation of Soil with Variable Compressibility under Cyclic Loadings

Analysis of the Most Efficient Horizontal Drainage Position in the Large Strain Consolidation Considering the Self-Weight Effect

A Small Strain Constitutive Model Based on Hardening Soil Model

Geotechnical Strain Localization Analysis Based on Micropolar Continuum Theory Considering Evolution of Internal Characteristic Length

Effects of Strength Anisotropy and Strain Softening on Soil Bearing Capacity through a Cosserat Nonlocal Finite-Element Method

Unified hardening (UH) model for clays and sands

Stability analysis of slope in strain-softening soils using local arc-length solution scheme

Poromechanical solution for one-dimensional large strain consolidation of modified cam clay soil