Sheng-Li Chen,Hai-Sui Yu,Younane N. Abousleiman,Christopher E. Kees
Abstract:A theoretical model describing the one-dimensional large strain consolidation of the modified Cam Clay soil is presented in this paper. The model is based on the Lagrangian formulation, and is capable of featuring the variability of soil compressibility (inherently so due to the direct incorporation of the specific Cam Clay plasticity model) and permeability, as well as the impact of overconsolidation ratio. The derivation starts from the establishment of the incremental stress-strain relations for both purely elastic and elastoplastic deformations under one-dimensional compression condition, and thereafter the coefficients of compressibility/volume change that are essential to the consolidation analysis. The governing partial differential equation is then neatly deduced in conjunction with the continuity and equilibrium conditions for the soil, with the vertical effective stress being the privileged unknown to be solved for. Subsequently, semi-analytical solution to the developed rigorous poroelastoplastic large strain consolidation model is obtained and verified with the ABAQUS finite element numerical results. Parametric analyses are finally provided to investigate in detail the influences of the soil overconsolidation ratio, large strain configuration, and the variability of the soil permeability on the calculated one-dimensional consolidation response.
What problem does this paper attempt to address?
The problem that this paper attempts to solve is: **Establish a theoretical model to describe the consolidation behavior of Modified Cam Clay (MCC) under large - strain conditions and provide a semi - analytical solution**. Specifically, the author aims to:
1. **Consider the changes in nonlinear soil compressibility and permeability**: The traditional Terzaghi one - dimensional consolidation theory assumes that the stress - strain relationship remains linear throughout the consolidation process, while in fact the compressibility and permeability of soil change with the change of stress state. Therefore, this paper attempts to more accurately describe these nonlinear characteristics by introducing the MCC model.
2. **Introduce the influence of the over - consolidation ratio (OCR)**: The over - consolidation ratio is one of the important parameters affecting the mechanical behavior of soil, especially under large - strain conditions. By combining the MCC model, this paper considers the influence of OCR on the consolidation process.
3. **Develop the consolidation theory under large - strain conditions**: Different from the consolidation analysis under small - strain conditions, the consolidation under large - strain conditions involves more complex nonlinear problems. Based on the Lagrangian formulation method, this paper derives the governing partial differential equation of one - dimensional large - strain consolidation and proposes a semi - analytical method for solving this equation.
4. **Verify and apply the new model**: By comparing with the results of the finite element software ABAQUS, the author verifies the accuracy of the proposed theoretical model and semi - analytical solution. In addition, a parameter analysis is carried out to study in detail the influence of OCR, large - strain configuration and soil permeability change on the consolidation response.
### Main contributions
- **Theoretical innovation**: A one - dimensional large - strain consolidation theory based on the MCC model is proposed, which can better describe the nonlinear behavior of soil.
- **Analytical solution**: A semi - analytical solution is developed, which is more efficient and easier to understand than numerical simulation.
- **Practical application**: Through parameter analysis, the influence of different factors on the consolidation process is revealed, providing a valuable reference for engineering practice.
### Formula summary
- **The relationship between void ratio and effective stress in the elastic deformation stage**:
\[
e = e_i+\ln\left(\frac{\sigma_v' + A}{\sigma_z' + A}\right)
\]
where \(e_i\) is the initial void ratio, \(A=\frac{2(1 - \mu)}{1+\mu}\sigma_h'-\frac{2\mu}{1+\mu}\sigma_v'\), and \(\sigma_v'\) and \(\sigma_z'\) are the initial vertical effective stress and the current vertical effective stress respectively.
- **The relationship between void ratio and effective stress in the plastic deformation stage**:
\[
\frac{De}{D\sigma_z'}=(1 + e)g(\sigma_x',\sigma_z')
\]
where \(g(\sigma_x',\sigma_z')\) is a function determined by the MCC model.
- **The governing equation**:
\[
\frac{\partial\sigma_z'(a,t)}{\partial t}=\frac{1}{a_v(\sigma_z')}\frac{\partial}{\partial a}\left\{\frac{k[e(\sigma_z')]}{\gamma_w(1 + e_i)^2}\frac{1 + e_i}{1+e(\sigma_z')}\frac{\partial\sigma_z'(a,t)}{\partial a}\right\}
\]
Through these formulas and theoretical frameworks, the author successfully describes the complex mechanical behavior in the one - dimensional large - strain consolidation process.