Abstract:Mg-Gd alloys show good mechanical properties due to the strengthening β′ phases. However, the β′ phases are unstable and easily transform into other phases, which leads to the severe performance deterioration at elevated temperatures. In this paper, the tensile creep behaviors of Mg-10Gd-0.4Zr alloy in different heat treatment states were investigated at temperatures from 225 °C to 300 °C under stresses from 50 MPa to 80 MPa. The results showed that the creep behaviors of the solution treated (T4) and peak-aged (T6) alloys were dependent on the critical transition temperature. Microstructure evolution analysis revealed that the creep resistance of the T6 alloy was better than that of the T4 alloy below the critical transition temperature due to the existence of more β′ phases. With further increasing the creep temperature, the formation of β 1 phase and the widening of precipitate-free zones (PFZs) in the T6 alloy significantly deteriorated the creep resistance, while the precipitated β′ phases strengthened the T4 alloy effectively. It resulted in that the T4 alloy exhibited better creep resistance above the critical transition temperature. The stress exponents (3.7–6.2) and creep activation energy (127 kJ mol −1 ) of T4 alloy indicated that the dominated creep mechanism was dislocation climb assisted by lattice self-diffusion of Mg atoms. The stress exponents (3.6–6.4) of T6 alloy were close to that of T4 alloy, while the creep activation energy changed from 94 kJ mol −1 to 192 kJ mol −1 with increasing creep temperature. Observation of dislocation configuration revealed that the creep mechanism of T6 alloy transformed into dislocation cross slip above the critical transition temperature.

Alloying Effect on the Room Temperature Creep Characteristics of a Ti-Zr-Be Bulk Metallic Glass

Nanoindentation Study on the Room Temperature Creep Characteristics of A Senary Ti16.7zr16.7hf16.7cu16.7ni16.7be16.7 High Entropy Bulk Metallic Glass

Room Temperature Nanoindentation Creep Behavior of TiZrHfBeCu(Ni) High Entropy Bulk Metallic Glasses

Dependence of Room-Temperature Nanoindentation Creep Behavior and Shear Transformation Zone on the Glass Transition Temperature in Bulk Metallic Glasses

Effects of Alloying Elements on Creep of TiAl Alloys with a Fine Lamellar Structure

Nanoindentation study on room-temperature creep behavior of Ir33Ni28Ta39 bulk metallic glass

Structural transformation and rheological processes in bulk metallic glass Zr41Ti14Cu12.5Ni10Be22.5

Effects of Alloying Elements on Crystallization Kinetics of Ti–Zr–Be Bulk Metallic Glass

Modeling and measurements of creep deformation in laser-melted Al-Ti-Zr alloys with bimodal grain size

Effect of Mo addition on nanoindentation creep behavior of FeCoBSiNb bulk metallic glasses

Effect of Al Content on Microstructure and Properties of AlxCr0.2NbTiV Refractory High-Entropy Alloys

Abnormal creep behavior of Mg-12Gd-1MM-0.6Zr (wt.%) alloy at 300C

Room temperature tensile creep behavior of Mg-6Zn-0.4Mn-0.3Al-0.2Ca (wt.%) alloy containing icosahedral quasicrystals

Effect of Al addition on properties of Cu45Zr45.5Ti9.5 bulk metallic glass

The effect of minor alloying on the glass forming ability and crystallization reaction of Ti32.8Zr30.2Cu9M5.3Be22.7 (M=Fe, Co, and Ni) bulk metallic glass

Abnormal creep behavior of Mg–12Gd–1MM–0.6Zr (wt.%) alloy at 300°C

Sub-T-g Annealing Effect on the Kinetics of Glass Transition and Crystallization for a Ti-Zr-Be-Fe Bulk Metallic Glass

Incorporation of ultrafine nanograins in Zr–Cu–Al–Ni–Co bulk metallic glass enabling significantly improved mechanical properties

Tailoring mechanical heterogeneity, nanoscale creep deformation and optical properties of nanostructured Zr-based metallic glass

Tensile creep behaviors of Mg-10Gd-0.4Zr alloy in different heat treatment states

Compressive creep behavior of selective electron beam melted high Nb containing TiAl alloy