Abstract:High-damping rubber materials utilized in high-damping rubber isolation bearings are frequently subjected to multiple deformations during the occurrence of earthquakes. Typically, large combined compression–shear deformations of the material could potentially cause compressive shear damage to rubber bearings. During this process, visco-hyperelastic properties of rubber materials will greatly change, which would significantly impact the seismic performance of rubber bearings. Thus, to give out a deep insight into their variations, it is necessary and urgent to develop a high-performance numerical method to investigate this process. This paper proposed a visco-hyperelastic constitutive modeling approach for high-damping rubber materials based on the experimental assessment of combined quasi-static compression–cyclic shear deformation process. Within the thermodynamic framework, the Clausius–Duhem inequality associated with the intrinsic dissipation of the material was firstly derived in accordance with the Lagrangian formulism. Then, stress–strain relations were obtained upon considering the occurrence of entropy production due to viscous dissipation. In the model, Stumpf–Marczak strain energy density function, which satisfies the Baker–Ericksen (B–E) inequality, was harnessed to describe the hyperelasticity of the material. By introducing higher orders of strain and strain rates and taking their couplings into account, a generalized viscous dissipation potential was proposed to capture nonlinear strain and strain rate-sensitivity effects of the material. To identify constitutive parameters, the deformation gradient was particularized for the combined quasi-static compression–cyclic shear deformation process. And, an inverse identification procedure was carried out at different levels of compression stress. The prediction results revealed that the proposed model exhibits remarkable prediction ability and adaptivity for different rubber materials during this process. Several new insights were highlighted on the variations of visco-hyperelastic characteristics of high-damping rubber materials with respect to the compression stress. The accuracy of the model was further validated by design parameters including initial shear modulus, secant shear modulus and equivalent viscous damping factor. This work could provide a fundamental guideline for the optimization and reliability analysis of high-damping rubber isolation bearings used in the field of seismic engineering.

Simulation-based Prediction of Cyclic Failure in Rubbery Materials Using Nonlinear Space-Time Finite Element Method Coupled with Continuum Damage Mechanics

Experimental Characterization and Finite Element Modeling the Deformation Behavior of Rubbers with Geometry Defects

Continuum Damage Mechanics Based Fatigue Life Prediction and Fatigue Property Analysis of Pitting Corrosion Steel Bars

Experimental Mechanics And Numerical Prediction On Stress Relaxation And Unrecoverable Damage Characteristics Of Rubber Materials

Prediction of strength using bending test method

A Finite Strain Visco-Hyperelastic Damage Model for Rubber-Like Materials:Theory and Numerical Implementation

A Refined Cumulative Fatigue Damage Model for Rubber Components

Numerical Simulation for Durability of a Viscoelastic Polymer Material Subjected to Variable Loadings Fatigue Based on Entropy Damage Criterion

A finite strain visco-hyperelastic damage model for rubber-like materials: theory and numerical implementation

Prediction of Fatigue Life of Rubber Mounts Using Stress-Based Damage Indexes

Numerical Simulation on Failure Process of Rubber-Sleeved Headed Stud Shear Connector

A Method to Develop A Unified Fatigue Life Prediction Model for Filled Natural Rubbers under Uniaxial Loads

Numerical Simulation of Rubber Concrete Considering Fatigue Damage Accumulation of Cohesive Zone Model

Study on Prediction of Fatigue Life of Rubber Mount Based on Linear Cumulative Fatigue Damage Theory

Prediction of Rubber Fatigue Life Using an Assimilation‐based Learning Approach and Incremental Crack Propagation Model

Analysis of Cord-Rubber Composite Response Using the Nonlinear Continuum Damage Mechanics Approach

Visco-Hyperelastic Constitutive Modeling for High-Damping Rubber Materials During Combined Quasi-Static Compression–Cyclic Shear Deformation Process

Prediction of Low Cycle Fatigue Crack Growth under Mixed-mode Loading Conditions Using Cohesive Zone Models

Fatigue Life Prediction of Rubber Bushing Based on Random Vibration

Continuum Damage Mechanics Combined with the Extended Finite Element Method for the Total Life Prediction of a Metallic Component

A Novel Planar Tension Test of Rubber for Evaluating the Prediction Ability of the Modified Eight-Chain Model under Moderate Finite Deformation