Abstract:Membrane biofouling, adhesion of microorganisms on the surface and the subsequent formation of a biofilm, remains a persistent and inevitable issue, which results in a dramatic reduction of permeability and lifespan. Constructing a membrane with active bacteria-killing and passive anti-adhesion properties is still a challenge to mitigate membrane biofouling. Herein, an active-passive anti-biofouling membrane was originally fabricated by integration of hydrophilic hyperbranched poly(N-acryloylmorpholine) (HPA) and the dimethylaminoethyl acrylate-dodecylammonium bromide (DD) quaternary ammonium compound. Inspired by modern dopamine biomimetic adhesion chemistry, thiolated HPA was first immobilized on the polydopamine (PD)-modified poly(vinylidene fluoride) membrane surface through Michael addition, followed by conjugation of DD via a thiol-ene click reaction. The membrane surface changes of the chemical structure, hydrophilicity, and zeta potential proved that bacteria-killing DD and the anti-adhesion HPA layer were successively conjugated. The initial contact angle of the M-PD/HPA/DD membrane was reduced from 120.5 degrees for the pure membrane to 52.3 degrees. Furthermore, the water flux of the M-PD/HPA/DD membrane increased from 318.9 L m(-2) h(-1) (0.02 MPa) for the pure membrane to 854.4 L m(-2) h(-1). In addition, the M-PD/HPA/DD membrane exhibited excellent active bacteria-killing property with inhibition rates of similar to 90% for Escherichia coli and similar to 95% for Staphylococcus aureus, respectively. Meanwhile, in the filtration of artificial bacteria wastewater, the M-PD/HPA/DD membrane showed a higher water flux recovery rate of 86.9% than 43.3% for the pure membrane, indicating an excellent anti-biofouling property. Therefore, this molecular-level design approach for the modification of the membrane surface could significantly enhance permeability and mitigate membrane biofouling, which provides a promising dimension for the preparation of the anti-biofouling membrane.

Creation of Active-Passive Integrated Mechanisms on Membrane Surfaces for Superior Antifouling and Antibacterial Properties

Antifouling and Antibacterial Behavior of Membranes Containing Quaternary Ammonium and Zwitterionic Polymers

Constructing Membrane Surface with Synergistic Passive Antifouling and Active Antibacterial Strategies Through Organic-Inorganic Composite Modifier

Zwitterion-like, Charge-Balanced Ultrathin Layers on Polymeric Membranes for Antifouling Property.

Improved Antifouling Properties of Polyvinyl Chloride Blend Membranes by Novel Phosphate Based-Zwitterionic Polymer Additive

Engineering amphiphilic membrane surfaces based on PEO and PDMS segments for improved antifouling performances

Construction of Antimicrobial Peptides/Alginate Multilayers Modified Membrane: Antibiofouling Performance and Mechanisms

Molecular design of antifouling ultrafiltration membranes via copolymerization of bactericidal and hydrophilic polymers

Molecular Understanding and Structural-Based Design of Polyacrylamides and Polyacrylates as Antifouling Materials

Engineering dual-heterogeneous membrane surface with heterostructured modifier to integrate multi-defense antifouling mechanisms

Integration of a Hydrophilic Hyperbranched Polymer and a Quaternary Ammonium Compound to Mitigate Membrane Biofouling

Modification of microfiltration membranes by alkoxysilane polycondensation induced quaternary ammonium compounds grafting for biofouling mitigation

Engineering polyamide nanofiltration membrane with bifunctional terpolymer brushes for antifouling and antimicrobial properties

Engineering amphiphilic nanofiltration membrane surfaces with a multi-defense mechanism for improved antifouling performances

Pressure-assisted In-Depth Hydrophilic Tailoring of Porous Membranes Achieving High Water Permeability, Excellent Fouling Resistance and Superior Antimicrobial Ability

Construction of Hierarchical Fouling Resistance Surfaces Onto Poly(vinylidene Fluoride) Membranes for Combating Membrane Biofouling

Surface functionalization via synergistic grafting of surface-modified silica nanoparticles and layered double hydroxide nanosheets for fabrication of superhydrophilic but relatively oleophobic antifouling membranes

Enhancing the antifouling property of polymeric membrane via surface charge regulation

Engineering Antifouling Membrane with Surface Segregation Agents Bearing Crosslinked Low Surface Energy Segments

Efficient Wastewater Treatment by Membranes Through Constructing Tunable Antifouling Membrane Surfaces.

Hierarchically engineered membrane surfaces with superior antifouling and self-cleaning properties