Abstract:Membrane biofouling, adhesion of microorganisms on the surface and the subsequent formation of a biofilm, remains a persistent and inevitable issue, which results in a dramatic reduction of permeability and lifespan. Constructing a membrane with active bacteria-killing and passive anti-adhesion properties is still a challenge to mitigate membrane biofouling. Herein, an active-passive anti-biofouling membrane was originally fabricated by integration of hydrophilic hyperbranched poly(N-acryloylmorpholine) (HPA) and the dimethylaminoethyl acrylate-dodecylammonium bromide (DD) quaternary ammonium compound. Inspired by modern dopamine biomimetic adhesion chemistry, thiolated HPA was first immobilized on the polydopamine (PD)-modified poly(vinylidene fluoride) membrane surface through Michael addition, followed by conjugation of DD via a thiol-ene click reaction. The membrane surface changes of the chemical structure, hydrophilicity, and zeta potential proved that bacteria-killing DD and the anti-adhesion HPA layer were successively conjugated. The initial contact angle of the M-PD/HPA/DD membrane was reduced from 120.5 degrees for the pure membrane to 52.3 degrees. Furthermore, the water flux of the M-PD/HPA/DD membrane increased from 318.9 L m(-2) h(-1) (0.02 MPa) for the pure membrane to 854.4 L m(-2) h(-1). In addition, the M-PD/HPA/DD membrane exhibited excellent active bacteria-killing property with inhibition rates of similar to 90% for Escherichia coli and similar to 95% for Staphylococcus aureus, respectively. Meanwhile, in the filtration of artificial bacteria wastewater, the M-PD/HPA/DD membrane showed a higher water flux recovery rate of 86.9% than 43.3% for the pure membrane, indicating an excellent anti-biofouling property. Therefore, this molecular-level design approach for the modification of the membrane surface could significantly enhance permeability and mitigate membrane biofouling, which provides a promising dimension for the preparation of the anti-biofouling membrane.

Engineering amphiphilic membrane surfaces based on PEO and PDMS segments for improved antifouling performances

Zwitterion-like, Charge-Balanced Ultrathin Layers on Polymeric Membranes for Antifouling Property.

Engineering Antifouling Membrane with Surface Segregation Agents Bearing Crosslinked Low Surface Energy Segments

Mitigation Of Membrane Fouling Using An Electroactive Polyether Sulfone Membrane

Preparation and Characterization of an Amphiphilic Polyamide Nanofiltration Membrane with Improved Antifouling Properties by Two-Step Surface Modification Method

Improved Antifouling Properties of Poly(Ether Sulfone) Membrane by Incorporating the Amphiphilic Comb Copolymer with Mixed Poly(Ethylene Glycol) and Poly(Dimethylsiloxane) Brushes

A novel membrane showing both hydrophilic and oleophobic surface properties and its non-fouling performances for potential water treatment applications

Modification of microfiltration membranes by alkoxysilane polycondensation induced quaternary ammonium compounds grafting for biofouling mitigation

Engineering a Robust, Versatile Amphiphilic Membrane Surface Through Forced Surface Segregation for Ultralow Flux‐Decline

Creation of Active-Passive Integrated Mechanisms on Membrane Surfaces for Superior Antifouling and Antibacterial Properties

Engineering amphiphilic nanofiltration membrane surfaces with a multi-defense mechanism for improved antifouling performances

Improved antifouling properties of polyethersulfone membrane by blending the amphiphilic surface modifier with crosslinked hydrophobic segments

Generation of anti-biofouling ultrafiltration membrane surface by blending novel branched amphiphilic polymers with polyethersulfone

Antifouling Polyethersulfone Membrane Blended with A Dual-Mode Amphiphilic Copolymer

Surface functionalization via synergistic grafting of surface-modified silica nanoparticles and layered double hydroxide nanosheets for fabrication of superhydrophilic but relatively oleophobic antifouling membranes

Dopamine Triggered One Step Polymerization and Codeposition of Reactive Surfactant on PES Membrane Surface for Antifouling Modification

Constructing Membrane Surface with Synergistic Passive Antifouling and Active Antibacterial Strategies Through Organic-Inorganic Composite Modifier

Integration of a Hydrophilic Hyperbranched Polymer and a Quaternary Ammonium Compound to Mitigate Membrane Biofouling

Appearance of poly(ethylene oxide) segments in the polyamide layer for antifouling nanofiltration membranes

Hierarchically engineered membrane surfaces with superior antifouling and self-cleaning properties

Electrostatic enhanced surface segregation approach to self-cleaning and antifouling membranes for efficient molecular separation