Abstract:Thermally conductive but electrically insulating polymer composites have drawn much attention in various applications including thermal management, electronic packing, etc. Herein, a facile method of preparing polymer composites with both excellent thermal conductivity and electrical insulation is reported. To do this, nylon 6 (PA6)/Graphene nanoplatelets (GNPs) composites were firstly prepared via melt blending, then smashed into micron particles and coated with hexagonal boron nitride (h-BN) powder via VAE resin, finally hot compress molding to form composites. Thus depending on the content of GNPs inside PA6 particles and the content of h-BN coated on the particles, the thermal and electrical conductivity of the composites could be well controlled. For instance, at the total content of fillers is 18.82 vol%, with 1.97 vol% GNPs insides PA particles and 16.85 vol% h-BN coated on the surface, almost ten times improvement of thermal conductivity (from 0.29 to 2.69 W m−1k−1) has been achieved, while still maintain an excellent electrical insulating (as low as 4.13 × 10−9 S/m). It is proposed that this double segregated filler network could provide synergistic enhancement for the thermal conductivity, while the electrical conductivity caused by GNPs could be largely cut off by h-BN filler network. More importantly, this unique structure could be well preserved even after the sample thickness was decreased into a thin film, resulting in a further increase of thermal conductivity (up to 8.96 W m−1k−1) in the flow direction. Since various thermoplastic polymers can be chosen as matrix, and different filler combination can be adopted to construct thermal conductive synergistic and electrical insulating, we believe that this work provides a facial method to fabricate highly thermally conductive composites with a low electrical conductivity.

Highly Efficient Electrically Conductive Networks in Carbon‐black‐filled Ternary Blends Through the Formation of Thermodynamically Induced Self‐assembled Hierarchical Structures

Tunable Electrical Conductivity Of Carbon-Black-Filled Ternary Polymer Blends By Constructing A Hierarchical Structure

Comparison Between the Efficiencies of Two Conductive Networks Formed in Carbon Black-Filled Ternary Polymer Blends by Different Hierarchical Structures

Thermodynamically induced self-assembled electrically conductive networks in carbon-black-filled ternary polymer blends

Electric Conductivity and Thermorheology Properties of Polyacrylonitrile/Nylon6 Composites Filled with Carbon Black

Improved electrical conductivity of polymer/carbon black composites by simultaneous dispersion and interaction-induced network assembly

Effect of Carbon Black Self-Networking on Surface-Morphological and Electrical Properties of Immiscible Polypropylene/polyamide 6 Blends

Improved Electrical Conductivity of TPU/carbon Black Composites by Addition of COPA and Selective Localization of Carbon Black at the Interface of Sea-Island Structured Polymer Blends.

Comparison of Three Interfacial Conductive Networks Formed in Carbon Black-Filled PA6/PBT Blends

Effect of Polyamide 6 on the Morphology and Electrical Conductivity of Carbon Black-Filled Polypropylene Composites.

Enhanced Thermal Conductivity of Polypropylene/polyamide 6 Composites Via Optimizing the Selective Distribution of H-Bn and NH2-CNTs Hybrid Fillers Within the Co-Continuous Structure

Enhancing the Electrical Conductivity of Carbon Black-Filled Immiscible Polymer Blends by Tuning the Morphology

Conductive polycarbonate composites prepared by a ternary polymer blend approach involving sea‐island‐type interfacial carbon black networks

Constructing Heterostructured MWCNT-BN Hybrid Fillers in Electrospun TPU Films to Achieve Superior Thermal Conductivity and Electrical Insulation Properties

Enhanced Mechanical Property of Polyamide-6/Graphite Sheet Composites with Segregated 3D Network Binary Structure for High Thermal Conductivity

Preparation of highly thermally conductive but electrically insulating composites by constructing a segregated double network in polymer composites

Towards efficient electromagnetic interference shielding performance for polyethylene composites by structuring segregated carbon black/graphite networks

Synchronously Improved Thermal Conductivity and Mechanical Property for Polybenzimidazole Composites by Building the Ternary Hybrid Nanofillers Networks

Constructing Highly Thermally Conductive Polystyrene-Based Composites by Introducing Multi-Walled Carbon Nanotubes into Melamine Foam-Supported Boron Nitride Network

High-temperature Polymer Conductors with Self-Assembled Conductive Pathways

Design of a ternary synergistic network of HDPE/BN/CNT composites with an aligned shish-kebab structure for enhanced thermal conductivity and tensile strength