Abstract:In the mixed-potential gas sensor, the electrode type, particle size, microstructural morphology, as well as the interface state between the oxide-sensitive electrode and the solid electrolyte, are the key factors for determining the magnitude of the mixed potential. NiO-based material with the addition of Y2O3-stabilized 2 O 3-stabilized ZrO2 2 (YSZ) particles is considered as one of the promising sensitive electrode materials for preparing the mixed-potential NOx x sensors due to its excellent gas sensitivity. In this paper, the preparation technology of NiO-sensitive electrodes is developed and optimized for improving NOx x (NO and NO2) 2 ) gas-sensitivity properties of the NOx x sensors. The experimental results show that the addition of YSZ can effectively improve the agglomeration morphology of NiO particles in the NOx-YSZ-based x-YSZ-based electrode material during high temperature sintering (i.e. 1200 degrees C) and enhance the bonding strength with the solid electrolyte. The sensor which was prepared by using the developed NOx-YSZ-based x-YSZ-based electrode material with the YSZ addition of 20 wt% has the most sensitive response characteristic to NO gas, and its response potential value increases with NO gas concentration. Elevating electrode sintering temperature can increase the size of NiO particles and shorten the length of the three-phase boundary (TPB) in the sensitive electrode. The average length of TPB is the longest in the sensitive electrode sintered at 1000 degrees C which corresponds to the best sensitive response to NO gas. The sensitive electrode's thickness also affects the NO response sensitivity, and the sensor with an electrode thickness of 14 mu m has the most NO response sensitivity. In addition, the NO/NO2 2 gas mixture test results indicate that the current developed sensor is more sensitive to NO2 2 gas than that of NO gas.

Improvement of NO2 Sensing Characteristic for Mixed Potential Type Gas Sensor Based on YSZ and Rh/Co3V2O8 Sensing Electrode

Increasing the Sensitivity of an Amperometric, YSZ-based Total-Nox Sensor by Opening the Gas Diffusion Pathways in a Porous La0.8Sr0.2MnO3 Electrode

Compact Yttria-Stabilized Zirconia Based Total NOx Sensor with a Dual Functional Co3O4/NiO Sensing Electrode

Enhanced gas-sensing performance of SnO2/Nb2O5 hybrid nanowires

Mixed potential electrochemical NO2 sensor with YSZ ceramic electrolyte for monitoring in online vehicle diagnosis system

Performance Improvement of NiO/YSZ Sensitive Electrode for High Temperature Electrochemical NOx Gas Sensors

Improved NO2 Sensing Performance of Ternary Nanocomposites Based on Au-doped Co3O4/CuO

Mixed Potential Type Sensor Using Stabilized Zirconia and La<sub>0.75</sub>Sr<sub>0.25</sub>Cr<sub>0.5</sub>Mn<sub>0.5</sub>O<sub>3</sub> Sensing Electrode for NO<sub>2</sub> Detection

Study of NO2 sensors based on La0.8Sr0.2Co0.2Fe0.8O3-δ/Ag biphasic composite sensing electrodes

Mixed potential type sensor using stabilized zirconia and La 0.75Sr0.25Cr0.5Mn0.5O3 sensing electrode for NO2 detection

Improvement on Mixed-Potential Type Ammonia Sensor by a Cr2O3 Gas-Phase Catalyst Layer

An Amperometric Type NO2 Sensor Utilizing La0.7Sr0.3MnO3-δ-NiO Composite Sensing Electrode

Research on Preparation and Performance of a New Solid Electrolyte Based Nitrogen Oxides Sensor

Improving response performance of impedimetric NO 2 sensor using NiO-YSZ mixed conductor porous layer

Impedimetric-type NO2 Sensor Based on the P-Nio/n-ninb2o6 Heterojunction Sensing Electrode

Highly sensitive NO2 sensor based on mesoporous ZrO2–WO3 nanotubes composite

Enhanced Sensing Performance of the Amperometric NO2 Sensor by Use of a Mixed Conductive Porous Layer

Sensing behavior of YSZ-based amperometric NO₂ sensors consisting of Mn-based reference-electrode and In₂O₃ sensing-electrode.

Improving Response Performance of Impedimetric NO2 Sensor Using NiO-YSZ Mixed Conductor Porous Layer

High-performance NO 2 gas sensor enabled by Fe, N co-doped GQDs modification and pulse-driven temperature modulation

A Planar, Impedancemetric NO2 Sensor Based on NiO Nanoparticles Sensing Electrode