Abstract:A novel flower-like 0.1%WO3/CeO2(f) catalyst with high-efficiency was fabricated for the selective reduction of NOx by NH3. In contrast to traditional WO3/CeO2, this catalyst exhibited a significant SCR performance of 90% NOx conversion and 95% N2 selectivity within a wide temperature range of 175-450.C and great H2O and/or SO2 resistance under a high GHSV of 177,000 h 1. A variety of analytical techniques including SEM, XRD, XPS, NH3-TPD, H2-TPR and in situ DRIFTS-MS were employed for the catalysts characterization to fully understand the reaction mechanism over WO3/CeO2 catalysts. It was found that the flower-like structure promoted a more uniform dispersion of tungsten species on the support and a stronger interaction between WO3 and CeO2, thereby increasing the acid sites and surface vacancies. Moreover, more chemical active oxygen and trivalent cerium species were presented on 0.1% WO3/CeO2(f). In situ DRIFTS-MS and H2-TPR revealed that the reducibility was optimized for 0.1% WO3/CeO2(f). Then NH3 oxidation species could react with gaseous or adsorbed NOx during Eley-Rideal (E-R) pathway for 0.1%WO3/CeO2(f) at a high temperature (300. C). Meanwhile, NOx was reduced into more active bridged nitrates participating in the reaction via Langmuir-Hinshelwood (L-H) route, contributing to its superior deNOx performance. In comparison, the formation of inert adsorbed NH3 oxidization/ deformation species and bridged nitrates suppressed the SCR reaction over 0.1%WO3/CeO2, resulting in its inferior deNOx activity. This study not only provides a new strategy for developing high-efficiency ceria supported NH3-SCR catalyst, but also lays a foundation for investigating the reaction mechanism of cerium-based catalyst for further practical applications.

Catalytic Performance of Highly Dispersed WO3 Loaded on CeO2 in the Selective Catalytic Reduction of NO by NH3

Influence of CeO2 morphology on WO3/CeO2 catalyzed NO selective catalytic reduction by NH3

In Situ DRIFTS Studies of NH3-SCR Mechanism over V2O5-CeO2/TiO2-ZrO2 Catalysts for Selective Catalytic Reduction of NOx

Effects of WO3 and SiO2 Doping on CeO2–TiO2 Catalysts for Selective Catalytic Reduction of NO with Ammonia

Enhanced activity of tungsten modified CeO2/TiO2 for selective catalytic reduction of NOx with ammonia

NH3-SCR Performance of WO3 Blanketed CeO2 with Different Morphology: Balance of Surface Reducibility and Acidity

Mechanism of Selective Catalytic Reduction of NOx with NH3 over CeO2-WO3 Catalysts

A Superior Cerium-Tungsten Bimetal Oxide Catalyst with Flower-Like Structure for Selective Catalytic Reduction of NO by NH3

CuOx and WOx modified CeO2-TiO2 with various morphologies for the selective catalytic reduction of NOx with NH3

CeO2-WO3 catalysts for the selective catalytic reduction of NOx with NH3: effect of the amount of WO3

Effects of WOx Modification on the Activity, Adsorption and Redox Properties of CeO2 Catalyst for NOx Reduction with Ammonia

Promotional Effect of Ce-Doped V2o5-Wo3/Tio2 with Low Vanadium Loadings for Selective Catalytic Reduction of Nox by Nh3

DRIFT Study on Cerium−Tungsten/Titiania Catalyst for Selective Catalytic Reduction of NOx with NH3

Synergistic Effect Between Ceria and Tungsten Oxide on WO3–CeO2–TiO2 Catalysts for NH3-SCR Reaction

CeO 2 –WO 3 Mixed Oxides for the Selective Catalytic Reduction of NO X by NH 3 over a Wide Temperature Range

Characterization of CeO2–WO3 Catalysts Prepared by Different Methods for Selective Catalytic Reduction of NOx with NH3

Adjustment of operation temperature window of Mn-Ce oxide catalyst for the selective catalytic reduction of NOx with NH3

Starch bio-template synthesis of W-doped CeO2 for selective catalytic reduction of NO with NH3: Influence of ammonia titration

Low-temperature Activity and Mechanism of WO3-modified CeO2-TiO2 Catalyst under NH3-NO/NO2 SCR Conditions

Oxygen-vacancy mediated acidity and redox properties on WOx/Cu-doped CeO2 for the removal of NOx

Influence of CeO2 loading on structure and catalytic activity for NH3-SCR over TiO2-supported CeO2