Abstract:A simply fabricated, highly sensitive, and inexpensive optical fiber temperature sensor is reported with a Fabry–Perot (FP) microcavity of controlled length. The microcavity with controllable length is fabricated by single-mode fiber (SMF) and polydimethylsiloxane (PDMS) for temperature sensing. After the PDMS is cured, the SMF is connected to the supercontinuum light source (SCLS) and the optical spectrometer analyzer (OSA) for online observation of the reflection spectrum. The micro-displacement platform is used to pull the SMF to form an air cavity. After the air cavity is stabilized, ultraviolet (UV) activated glue is used for packaging outside the PDMS. The FP microcavity is formed by the end face of the SMF and the face of PDMS. The length of the FP microcavity can be controlled online by the micro-displacement platform to a minimum of 15 µm. The free spectral range (FSR) may reach 74.8 nm and the interference fringe contrast (IFC) is up to 19.8 dB to allow sensitive measurements across a wide temperature range. The experiments demonstrate a high temperature sensitivity of 5.388 nm/°C from 33 to 93 °C with high repeatability and linearity (R2=0.9937). Stability experiments showed that the maximum changes in wavelength and intensity are only 45 pm and 0.035 dB, respectively. It is anticipated that the easily constructed, compact, and inexpensive fiber-optic temperature sensor will be employed in practical applications.

High Sensitive Temperature Sensor Based on a Polymer Waveguide Integrated in an Optical Fibre Micro-Cavity

Highly Sensitive Temperature Sensor Using Intrinsic Mach-Zehnder Interferometer Formed by Bent Micro-Fiber Embedded in Polymer

Temperature sensor with enhanced sensitivity based on silicon Mach-Zehnder interferometer with waveguide group index engineering.

A High Sensitivity Temperature Sensor Based on Balloon-Shaped Bent SMF Structure with Its Original Polymer Coating

Temperature-insensitive Waveguide Sensor Using a Ring Cascaded with a Mach-Zehnder Interferometer

Highly-sensitive temperature sensor based on photopolymerized-waveguide embedded Mach-Zehnder interferometer

A Reliable Anti-Interference Temperature Sensor Based on a Four-Hole Microstructure Optical Fiber Mach-Zehnder Interferometer.

Inexpensive optical fiber Fabry–Perot microcavity with controllable length for sensitive temperature measurements

Fiber-optic Mach–Zehnder interferometric sensor for high-sensitivity high temperature measurement

A temperature sensor based on multi-beam capture and interference

Ultrasensitive Mach-Zehnder Interferometric Temperature Sensor Based on Liquid-Filled D-Shaped Fiber Cavity

Polymer-coated polishing seven-core Mach-Zehnder interferometer for temperature sensitivity enhancement

Ultra-sensitive Polymeric Waveguide Temperature Sensor Based on Asymmetric Mach-Zehnder Interferometer

High-sensitivity and Large-Range Fiber Optic Temperature Sensor Based on PDMS-coated Mach-Zehnder Interferometer Combined with FBG.

Femtosecond Laser Direct-Writing On-Chip MZI Temperature Sensor Based on Polymer Waveguides

High Temperature (up to 950 °C) Sensor Based on Micro Taper In-Line Fiber Mach–Zehnder Interferometer

High temperature ( up to 950 ° C ) sensor based on 2 micro taper in-line fiber Mach-Zehnder 3 interferometer ( Invited ) 4

An Antiinterference Temperature Sensor Based on Mach-Zehnder Interferometer Using Kagome Hollow-Core Photonic Crystal Fiber

High Temperature High Sensitivity Mach-Zehnder Interferometer Based on Waist-Enlarged Fiber Bitapers

A Temperature Sensor Based on Composite Optical Waveguide

High-resolution and Fast-Response Optical Waveguide Temperature Sensor Using Asymmetric Mach-Zehnder Interferometer Structure