Abstract:In this article, an in-line Mach-Zehnder interferometer (ILMZI)-based temperature sensor of a sandwich-like composite structure was proposed and experimentally demonstrated. Using simple cleaving and splicing operations, ILMZI was formed by compactly sandwiching a section of four-hole microstructure optical fiber (FHMF) of ultrashort length between two segments of multimode fibers and single-mode fibers in turn. Due to the large thermo-optic coefficient difference between the silica and air modes in FHMF, the sensor achieves a comparable sensitivity of 67.29 pm/degrees C over a wide dynamic range of 20.8 degrees C-100.4 degrees C. Because the sensing area length is only a few hundred micrometers, the long-term stability and anti-interference of the sensor are greatly enhanced. In addition, the large airhole design confines the propagation mode in silica medium by total internal reflection, reducing the interaction between the liquid sample and the sensing element, making the sensor inert to the ambient refractive index. The maximum response deviation of the sensor under microvibration disturbances is 3.51 x 10(-4) nm/degrees C, and the maximum cross-sensitivity under strain disturbances is only 0.0018 degrees C/mu epsilon. The proposed sensor is excellent in performance, easy in fabrication, simple in structure, and low in cost, which can be expected to be used in practical temperature sensing applications without any additional packaging.

Polymer-coated polishing seven-core Mach-Zehnder interferometer for temperature sensitivity enhancement

Highly Sensitive Temperature Sensor Using Intrinsic Mach-Zehnder Interferometer Formed by Bent Micro-Fiber Embedded in Polymer

A High Sensitivity Temperature Sensor Based on Balloon-Shaped Bent SMF Structure with Its Original Polymer Coating

Temperature sensor with enhanced sensitivity based on silicon Mach-Zehnder interferometer with waveguide group index engineering.

A Reliable Anti-Interference Temperature Sensor Based on a Four-Hole Microstructure Optical Fiber Mach-Zehnder Interferometer.

Investigation of a Side-Polished Fiber MZI and Its Sensing Performance

Highly-sensitive temperature sensor based on photopolymerized-waveguide embedded Mach-Zehnder interferometer

Temperature sensitivity enhancement for silicon-based Mach-Zehnder interferometer with single-mask design

Fiber-optic Mach–Zehnder interferometric sensor for high-sensitivity high temperature measurement

Ultra-sensitive Polymeric Waveguide Temperature Sensor Based on Asymmetric Mach-Zehnder Interferometer

A temperature sensor based on multi-beam capture and interference

Ultra-high sensitivity temperature sensor based on PDMS-assisted-cascaded Mach–Zehnder Interferometer

High-sensitivity and Large-Range Fiber Optic Temperature Sensor Based on PDMS-coated Mach-Zehnder Interferometer Combined with FBG.

Temperature-insensitive Waveguide Sensor Using a Ring Cascaded with a Mach-Zehnder Interferometer

Polymer/silica Hybrid Waveguide Temperature Sensor Based on Asymmetric Mach–Zehnder Interferometer

Optical fiber temperature sensor with Vernier effect formed by Mach–Zehnder interferometer cascaded Sagnac interferometer based on Hollow-core photonic crystal fiber

Femtosecond Laser Direct-Writing On-Chip MZI Temperature Sensor Based on Polymer Waveguides

An Antiinterference Temperature Sensor Based on Mach-Zehnder Interferometer Using Kagome Hollow-Core Photonic Crystal Fiber

A Novel Mach–Zehnder Interferometric Temperature Sensor Based on a Symmetrical Double-Grooved Structure

The Polydimethylsiloxane Coated Fiber Optic for All Fiber Temperature Sensing Based on the Multithin–Multifiber Structure

PDMS-coated No-Core Fiber Interferometer with Enhanced Sensitivity for Temperature Monitoring Applications