Experimental and Theoretical Investigation on Radiation Loss for a Fault Arc Between Different Material Electrodes in an Enclosed Air Tank

Mei Li,Yifei Wu,Yi Wu,Daoli Zhao

DOI: https://doi.org/10.1088/1361-6463/aa90f8

2017-01-01

Journal of Physics D Applied Physics

Abstract:Radiation loss for an air fault arc from different material electrodes in an enclosed tank has been investigated experimentally and theoretically. A hybrid approach by combining a thermopile and photomultiplier was proposed to detect the transient radiated energy. Experiments were made to measure the radiation characteristic of the fault arc between different metal electrodes. The radiated energy accounted for 30%-40%, 50%-60% and 25%-40% of the input electrical energy, respectively, for Cu, Fe and Al electrodes, almost regardless of arc current. The radiation and pressure rise determined experimentally were compared to theoretical values obtained from a 2D model for a fault arc with melting, evaporation and chemical reaction arising from the electrode erosion taken into account. This comparison validated the model and determined a suitable alpha (an adjusted parameter around the starting temperature of the re-absorption layer) of a semi-empirical radiation model based on the NEC (net emission coefficient) for different electrode erosions with and without considering the influence of metal vapour on radiation. The results show that the radiation enhancement from Cu and Fe vapour has a stronger lowering effect on pressure rise, and for Al it is weaker. When considering the radiation enhancement effect of vapour from Cu, Fe and Al electrodes, a in the radiation model ranges, respectively, from 0.7 < alpha < 0.83, 0.5 < alpha < 0.6 and 0.7 < alpha < 0.83 to 0.83 < alpha < 0.9, 0.6 < alpha < 0.7 and 0.7 < alpha < 0.83.