Abstract:For capturing and recycling of CO2 in the internal combustion engine, Rankle cycle engine can reduce the exhaust pollutants effectively under the condition of ensuring the engine thermal efficiency by using the techniques of spraying water in the cylinder and optimizing the ignition advance angle. However, due to the water spray nozzle need to be installed on the cylinder, which increases the cylinder head design difficulty and makes the combustion conditions become more complicated. In this paper, a new method is presented to carry out the closing inlet and exhaust system for internal combustion engines. The proposed new method uses liquid oxygen to solidify part of cooled CO2 from exhaust system into dry ice and the liquid oxygen turns into gas oxygen which is sent to inlet system. The other part of CO2 is sent to inlet system and mixed with oxygen, which can reduce the oxygen-enriched combustion detonation tendency and make combustion stable. Computing grid of the IP52FMI single-cylinder four-stroke gasoline-engine is established according to the actual shape of the combustion chamber using KIVA-3V program. The effects of exhaust gas recirculation (EGR) rate are analyzed on the temperatures, the pressures and the instantaneous heat release rates when the EGR rate is more than 8%. The possibility of enclosing intake and exhaust system for engine is verified. The carbon dioxide trapping device is designed and the IP52FMI engine is transformed and the CO2 capture experiment is carried out. The experimental results show that when the EGR rate is 36% for the optimum EGR rate. When the liquid oxygen of 35.80–437.40 g is imported into the device and last 1–20 min, respectively, 21.50–701.30 g dry ice is obtained. This research proposes a new design method which can capture CO2 for vehicular internal combustion engine.

Numerical simulation and experimental research on combustion characteristics of compression-ignition engine under an O2/CO2 atmosphere

Numerical simulations and experiments of oxygen-enriched combustion in engine and using liquid oxygen to solidify carbon

Numerical Simulation of Coal Combustion and NOx Emission under O2/CO2 Atmosphere

3D Numerical Simulation of Spray and Combustion Process for In-cylinder DI Gasoline Engine

Numerical Simulation of Low Temperature Oxygen-Enriched Combustion of Diesel Engine with the CFD & N-Heptane Sample Model's Coupling

Study of the Combustion Characteristics of A Hcci Engine Coupled with Oxy-Fuel Combustion Mode

Numerical simulation and experimental study of mixture formation and combustion process in a di diesel engine

Experiment Investigation on Combustion Characteristics of Gasoline in O2/CO2Atmosphere

Numerical Analysis of Flow, Mixture Formation and Combustion in a Direct Injection Natural Gas Engine

Simulation and Experiment for Oxygen-enriched Combustion Engine Using Liquid Oxygen to Solidify CO 2

Experimental and Simulation on Diesel Low Temperature Combustion of Charge Compositions

Numerical Study of the Influence of Combustion Characteristics with Different Ways of Adding Oxygen

Numerical Simulation Study on the Mixing Characteristics of Oxygen Fuel Combustion

Effect of CO2 and Its Concentration Variation on the Ignition and Combustion of Diesel Surrogate Fuel: Optical Experiments and Numerical Simulations

Simulation and Experiment of Auto-Ignition Characteristics for Diesel Fuel in O2/CO2 Atmosphere

Experimental study of effects of oxygen concentration on combustion and emissions of diesel engine

Numerical Simulation on DME Combustion Process and Emission Mechanism

Numerical Exploration on Hcci Combustion Characteristics under Nvo Strategy

Experimental Research on the Effects of Oxygen-Enriched Air on Combustion in a Small Spark-Ignition Engine

Simulation of Soot Formation in Pulverized Coal Combustion under O 2 /N 2 and O 2 /CO 2 Atmospheres

Experimental Study On Partially Premixed Compression Ignition Combustion Fueled With A Low Octane Number Primary Reference Fuel Using Two-Stage Fuel Supplying