Abstract:This paper presents a WR-2.2 band (330-500 GHz) waveguide with E-plane bends and a waveguide bandpass filter. A micro-metal additive manufacturing technology employs copper to process these devices. This technology includes several micromachining processes, which can produce integrated, miniaturized, and complex three-dimensional metal microstructures when meeting the process constraints. To successfully apply this technology to the fabrication of terahertz waveguide devices, many design details are considered. First, the E-plane bent transition structures in the waveguide overcome size limitations imposed by the manufacturing process, allowing for accurate measurement using standard waveguide interfaces. Second, the rectangular resonators compose the fifth-order waveguide bandpass filter spanning 20 GHz with a center frequency of 380 GHz. Given that the excess photoresist needs to be removed, some release holes are designed in the proper positions of the filter. Third, to increase the uniformity of the device layout and improve the machining quality in the electroforming process, a lot of rectangular holes are arranged around the device. By adopting a meticulous and novel design method in accordance with the process advantages and limitations, the fabrication accuracy of the device size is greatly increased. The integrated filter with exceptional performance is obtained. The measured average insertion loss within the passband is better than 1.2 dB, and the return loss exceeds 15 dB. Additionally, the filter demonstrates a center frequency offset of approximately 0.5%. Good consistency between simulation and measurement shows the validity of design and fabrication.

A 420 GHz Waveguide Filter Based on MEMS Technology

A 340ghz Cross-coupled Waveguide Filter Based on MEMS Process

A Novel 76 and 94ghz Dual Band Bandpass Filter Using Multilayer Step Impedance Resonators (Sirs)

A Novel Terahertz Waveguide Filter Based on MEMS Technology

A triple-mode ring dielectric resonator band-pass filter using substrate integrated waveguide (SIW)

MEMS Rectangular Waveguide Filter at 140 GHz

G-band rectangular waveguide filter fabricated using deep reactive ion etching and bonding processes

1 THz Micromachined Waveguide Band-Pass Filter

A 0.9-THz Integrally Manufactured High-Precision Waveguide Cavity Filter Using Electrochemical Micromachining Technology

Miniaturized W-Band Gap Waveguide Bandpass Filter Using the MEMS Technique for Both Waveguide and Surface Mounted Packaging.

400 GHz Easy-Packaging Waveguide Filters Based on Mixed-Mode and Off-Axis Couplings

A Novel Compact Thru-Silicon-Via On-Chip Passive Mmw Bandpass Filter for 77ghz Applications

Silicon Micromachined Terahertz Bandpass Filter with Elliptic Cavities

Silicon Based THz Antenna and Filter with MEMS Process

Experimental Realisation of Micromachined Terahertz Electromagnetic Crystal (EMXT) Waveguide Bandpass Filter

Design and Fabrication of a MEMS Bandpass Filter with Different Center Frequency of 8.5-12 GHz.

Design and Analysis of A Terahertz Bandpass Filter

A novel microstrip MEMS bandpass filter on silicon substrate

Copper Micromachined WR‐2.2 Band Waveguide and Bandpass Filter

Design of Millimeter-Wave Resonant Cavity and Filter Using 3-D Substrate-Integrated Circular Waveguide

D-Band Micromachined Silicon Rectangular Waveguide Filter