Abstract:Purpose The purpose of this study is to solve the problem of longer dead-time in the rear bridge leg switches and lower efficiency in the Four-Switch Buck-Boost LLC Resonant Converter. Design/methodology/approach The paper adopts time-domain analysis to derive the time-domain expression for optimal dead time, analyzing the conditions for achieving soft switching of the transistors. It further explores the relationship between the dead time of the bridge arm switching transistors and the input/output of the converter under different operating conditions. Specifically, the dead time of the upper bridge arm transistors increases with the converter input voltage and decreases with the output current. In contrast, the dead time of the lower bridge arm transistors is independent of the converter output current and decreases with increasing converter input voltage. Findings By simulating and constructing a 500 W experimental prototype, experimental results indicate that designing the dead time of the switch according to the optimal dead time proposed in this paper significantly improves efficiency when the converter operates from heavy load to full load. When the transformer takes minimum input, maximum input and intermediate bus voltage inputs respectively, its peak efficiency is increased by 0.6%, 1.7% and 1.1%, respectively, compared to the traditional four-switch Buck–Boost LLC resonant converter. Originality/value Experimental validation confirms the correctness of the optimal dead time design and analyzes the impact of different operating conditions of the converter on the dead time. This is of significant importance for the rational design of switch dead times and the enhancement of converter efficiency.

The Study of Dead-Time Commutation and Compensation in Dual Bridge Series Resonant DC/DC Converter

Design of Standby Control for Class-E Resonant Converter

A Control Method Based on Minimum Conduction Losses for High Efficiency Isolated Dual-bridge Series Resonant Converters.

Dead-time Effects Analysis and Elimination for Voltage Source Inverter

Minimum Current Control for Under-Resonant Dual-Bridge-Series-Resonant Converter

Study on dual active bridge DC-DC converter based on second dual-phase-shifting control

Analysis and Design of a Control Strategy for Wide-Range ZVS of Isolated Bidirectional Dual-Bridge Series Resonant DC/DC Converters

A Control Method for the Problem of Losing the ZVS in CCM Mode LLC Converter Caused by Rectifier Parasitic Capacitance

Dead-Time Effect of the High-Frequency Isolated Bidirectional Full-Bridge DC–DC Converter: Comprehensive Theoretical Analysis and Experimental Verification

Study on Reducing Switching Current in Dual Bridge Series Resonant DC/DC Converter

Integrated Optimization of Dual-Active-Bridge DC–DC Converter with ZVS for Battery Charging Applications

Dead-time Effects Analysis and Compensation of SPWM and SVPWM Inverter

Harmonics Mitigation of Dead Time Effects in Pwm Converters Using A Repetitive Controller

A Small Signal Model of Dual Bridge Series Resonant DC/DC Converter for Power Electronic Traction Transformer

An Analog-based, Duty Cycle Modulation Method to Remove the DC Bias in the Transformer for a Dual Active Bridge Converter

Time Domain Analysis of Reactive Components and Optimal Modulation for Isolated Dual Active Bridge DC/DC Converters

Steady-State and Transient DC Magnetic Flux Bias Suppression Methods for a Dual Active Bridge Converter

Analysis and compensation of dead-time effect in voltage source inverters considering parasitic capacitance and ripple current

Low-Side-Extended-Phase-Shift-Under-Resonant Modulation Scheme for Dual-Bridge-Series-Resonant Converter

Optimization design of dead time in the four-switch buck-boost LLC resonant converter

New methods to reduce circulating energy in dual active bridge converter