Abstract:Monolithic distributed Bragg reflector (DBR) cavity which directly integrates fiber Bragg gratings (FBGs) into the photosensitive RE-doped fibers is a promising configuration in constructing compact and efficient single frequency fiber lasers (SFFLs). Yet, the doping level of rare-earth (RE) ions has generally to be sacrificed in the classical Ge-photosensitized RE-doped silica fibers because of the dramatic refractive index increase caused by the introduction of Ge. Here, we demonstrate an approach to realize the trade-off between photosensitivity and RE doping concentration. We validate that the addition of a small amount of cerium (0.37wt.%) instead of Ge could photosensitize Yb3+-doped silica fiber (YDF), while maintaining fiber numerical aperture (NA) at 0.12 under a high 2.5-wt.% Yb doping level. Based on the short monolithic DBR cavity constructed by this germanium-free photosensitive highly YDF, a 1064 nm fiber laser with a 48.6% slope efficiency and an over 200 mW power on two orthogonally polarized modes could be realized. Further stable and linear-polarized 1064 nm SFFL is also demonstrated in a designed monolithic polarization maintaining cavity with an output power of 119 mW and an efficiency of 26.4%. Our results provide an alternative way to develop photosensitive highly RE-doped fibers towards monolithic laser cavity application.

A 1030 Nm Single-Frequency Distributed Bragg Reflector Yb-doped Silica Fiber Laser

High-power, high-efficiency single-frequency DBR fiber laser at 1064 nm based on Yb3+-doped silica fiber

Single-frequency DBR Nd-doped fiber laser at 1120 nm with a narrow linewidth and low threshold

Fabrication of integrated single frequency DBR fiber laser directly on ytterbium doped fiber by femtosecond laser

Fabrication of Integrated Single Frequency DBR Fiber Laser Directly on YDF by Femtosecond Laser

Tunable Single-Frequency Ytterbium-Doped Fiber BDR Laser

Efficient DBR Single-Frequency Er3+/Yb3+ Co-Doped Phosphate Fiber Laser Operating at 1500 Nm

High temperature resistant ultra-short DBR Yb-doped fiber laser

All-fiber type Er3+/Yb3+ co-doped fiber laser

Distributed Bragg Reflector Laser Based on Composite Fiber Heavily Doped with Erbium Ions

Low-threshold 1150 Nm Single-Polarization Single-Frequency Yb-doped DFB Fiber Laser

DBR Yb-doped Double-Clad Fiber Laser Operating at 1.06 Μm

High Power and High Efficiency Single-Frequency 1030 Nm DFB Fiber Laser

An All-Fiber Type Er^(3+)/Yb^(3+) Co-Doped Fiber Laser

Single-frequency fiber laser of 315 mW at 1940 nm based on a Tm : YAG/Ho : YAG-co-derived silica fiber

Single-frequency DBR lasing by integrating FBGs into germanium-free photosensitive highly Yb3+-doped silica fibers

Single-frequency Yb-doped Fiber Laser with Distributed Feedback Based on a Random FBG

High-efficiency sub-watt in-band-pumped single-frequency DBR Tm3+-doped germanate fiber laser at 1950 nm

High-Power Single-Frequency Thulium-Doped Fiber DBR Laser at 1943 nm

110 Mw Single-Frequency Yb:YAG Crystal-Derived Silica Fiber Laser at 1064 Nm.