Abstract:The use of properly designed nanostructured anode targets enables direct generation of high performance X-rays. In particular, this scheme has attracted widespread research interest for obtaining micro-focal spot X-ray radiation. In this study, we developed a thermal evaporating deposition technique and achieved controllable preparation of different single crystalline molybdenum (Mo) nanostructures by exploiting the lattice matching relationship between the substrate and the product crystal orientation. When used as an anode target for a reflective X-ray radiation device, these nanostructured Mo single crystals exhibit advantages over traditional targets at larger radiation angles. Further experimental and simulation results demonstrate the geometric characteristics of these Mo nanostructures and their correlation with the radiation intensity, focal spot size, and brightness of the generated X-rays. Among them, a unique frustum of square pyramid single crystalline Mo nanostructure stands out, due to its combination of three-dimensional body feature of nanostructures and radiation plane feature of planar targets. The research results not only provide a class of nanostructured anode target materials for reflective X-ray sources with different radiation angle requirements, but also make it possible to design and develop miniaturized devices for X-ray sources with selectable radiation performance and micro-focal spot.

Optimization Of Metal Anode Layer For Transmission Anode Flat Panel X-Ray Source Using Zno Nanowire Feas

Tungsten Target Optimization for Photon Fluence Maximization of a Transmission-Type Flat-Panel X-Ray Source by Monte Carlo Simulation and Experimental Measurement

Precisely-controlled Fabrication of Single ZnO Nanoemitter Arrays and Their Possible Application in Low Energy Parallel Electron Beam Exposure.

Fabrication of ZnO Nanowire Cold Cathode Flat-Panel X-ray Source with a Reflective Anode

Transmission Type Flat-Panel X-Ray Source Using Zno Nanowire Field Emitters

Optimisation of CNTs and ZnO nanostructures for electron sources

Fabrication of ZnO Nanowires Cold Cathode X-ray Source with Micro Patterned Transmission Anode

Surface Morphology, Electrochemical and Electrical Performances of ZnO Thin Films Sensitized with Ag Nanoparticles by UV Irradiation

Fabrication of ZnO Nanowire Cold Cathode Flat Panel X-ray Source Module for Adaptive X-ray Imaging

A Double-Sided Radiating Flat-Panel X-ray Source Using ZnO Nanowire Field Emitters

Fabrication of Gated ZnO Nanowire Field Emitter Arrays for Pulsed Flat Panel X-ray Source

Optimizing the Field Emission Properties of ZnO Nanowire Arrays by Precisely Tuning the Population Density and Application in Large-Area Gated Field Emitter Arrays.

Thermo-enhanced Field Emission from ZnO Nanowires: Role of Defects and Application in a Diode Flat Panel X-ray Source

Optimization of Transmission X-ray Target for Intense Pulsed Electron Beam Accelerators

Optimization Of Field Emission Properties Of Gated Cuo Nanowire Field Emitter Arrays For Field Emission Display Application

Fully Vacuum-Sealed Diode-Structure Addressable ZnO Nanowire Cold Cathode Flat-Panel X-ray Source: Fabrication and Imaging Application

Fully Vacuum-Sealed Addressable Nanowire Cold Cathode Flat-Panel X-Ray Source

An 8-Inch Diagonal Zno Nanowire Cold Cathode Panel For Flat-Panel X-Ray Source

Single Crystalline Molybdenum Nanostructure for Generating Reflective Micro-Focal Spot X-rays: Structure-controllable Preparation and Characteristic-Selectable Radiation

Optimization of a Field Emission Electron Source Based on Nano-Vacuum Channel Structures

Enhanced Cold Field Emission of Large-area Arrays of Vertically Aligned ZnO-nanotapers Via Sharpening: Experiment and Theory