Abstract:In flip-chip packaging, an underfill is dispensed on one or two adjacent sides of the die. The underfill is driven by a capillary flow to fill the gap between the die and substrate. The application of an underfill reduces the stress to solder bumps and enhances the reliability of the solder joints. Underfill materials consist of epoxy or cyanate ester resins, catalyst, crosslinker, wetting agent, pigment, and fillers. Underfill materials are highly filled with the filler loading ranging from 40% to 70%. In terms of underfill material processing, fast flow and curing are desired for high throughput. The viscosity, surface tension, and contact angle are key material properties affecting the gap filling process. In order to achieve fast filling, it is required that an underfill material has low viscosity and low contact angle at dispensing temperatures. Due to curing of an underfill material at dispensing temperature, the viscosity increases with time, which complicates the underfill flow process. The rheological behavior of several underfill materials was experimentally studied. All the underfill materials showed strong temperature dependence in viscosity before the curing. The time dependent viscosity and curing of underfill materials were examined by a dynamic time sweep test. The effects of viscosity and curing behavior of underfill materials on underfill material processing were investigated. The material with a longer gel time had more stable viscosity at room temperature, and therefore longer pot life. Experimental methods were developed to measure the surface tension and the contact angle of underfills at temperatures over 100 °C. Results showed that the contact angle for underfill on a substrate was time dependent. The interaction between underfill and substrate affects not only gap filling, but also filleting. The effect of surface energies of flip-chip substrates on wetting angles was also studied. Experiment results showed that for the same underfill, the higher the surface energy of substrate, the better the filleting.

Impact of substrate surface condition and epoxy mixture properties on the overflow/incomplete flow

Study of the Failure Mechanism of an Epoxy Coating System under High Hydrostatic Pressure

Underfill flow as viscous flow between parallel plates driven by capillary action

Investigation Of Characteristics Of The Capillary-Driven Underfill Flow

Flow Behavior Control in Immersion Lithography

Flow-restricted Etching Method on Isotropic Substrates and Its Mechanism

Underfill of flip chip on organic substrate: viscosity, surface tension, and contact angle

Investigation on the critical velocity for liquid loss in immersion lithography

Impact on Fluid Flow State by Different Structural Parameters of Immersion Lithography Unit

A New Analysis of the Capillary Driving Pressure for Underfill Flow in Flip-Chip Packaging

Underfill Filler Settling Effect on the Adhesive Force of Flip Chip Packages

Numerical Analysis of Permeability of Underfill Flow Domain in Flip-Chip Packaging

Degradation of Epoxy Coatings Exposed to Impingement Flow

Residual stress and thermal properties of rubber‐modified epoxy systems for semiconductor package

Effect of Liquid Dispensing on Flow Field for Immersion Lithography

Self-Patterning of Silica/Epoxy Nanocomposite Underfill by Tailored Hydrophilic-Superhydrophobic Surfaces for 3D Integrated Circuit (IC) Stacking.

Ink Fluidic Behaviors during R2R Slot Die Coating on Quality Thin Film Formation

Influence of Defects on Flow and Mass Transfer in the Channel with Micro-Fluidic Chips

Relationship of Particle Content and Size of Spherical Silica with the Flowability of Epoxy Molding Compounds for Large-Scale Integrated Circuits Packaging

Finite Element Modeling of Polymer Flow During Hot Embossing with Different Mold Structures and Embossing Conditions

Impact of process parameters on the flow behavior and filling accuracy of photoresist in hot embossing for microgroove array