Abstract:Background: It is well known the PTB7:PC71BM based photovoltaic cells have drawn great attention because the devices now hold the record in PSC performance. However, the crystallinity level of the used materials was reported very low, and this was tested with X-ray diffraction. It was reported that crystalline portions of the component enable a high absorption and a balanced charge transportation. As regards the phenomenon, the impact of the additive 1,8-diiodooctane (DIO) on the device performance has been reported in many references. In the work, the impact of solvent additive DIO, on the morphology formation and performance of PTB7:PC71BM:F8BT (poly[(9,9-di-noctylfluorenyl-2,7-diyl)-alt-(benzo[2,1,3] thiadiazol-4,8-diyl)]) ternary PSCs was investigated.Methods: Researches related to ternary PSCs were reviewed, and many repeatable experiments have been done. To analyze the effect of DIO on the PTB7: PC71BM: F8BT based ternary cells, we did many measurements such as absorption spectral, PL spectral, device performance, X-ray Diffraction (XRD) and Atomic Force Microscopy (AFM).Results: It was found that the additive plays an important role in controlling the active layers morphology of the ternary devices. When 3% described solvent additive was added to solvent CB, an increasing nearly 36% in JSC and a relatively modest 41% gain in the FF were found, which resulting in a nearly doubling of the PCE. In order to analyze the influence of additive on the device performance, morphology characterization of PTB7: PC71BM: F8BT ternary layers was elucidated using AFM and energy transport progress of the devices was probed from photoluminescence spectra.Conclusion: In summary, we have successfully constructed the polymer ternary BHJ devices based on PTB7: PC71BM: F8BT with a nearly doubling of the PCE compared to CB fabricated ternary devices. By analyzing the absorption spectral, surface morphology, energy transfer progress and external quantum efficiency, we found that DIO as solvent additive can favor the charge separation into the charge transfer state after exciton dissociation. In more detail, an effective morphology in CB+DIO film can be obtained that provides a plentiful interfacial area for charge generation and a balanced percolation way for charge transfer, which resulting in a nearly doubling of the PCE. This study provides method to improve morphology of active films, and thus improve the performance for ternary PSCs.

Authigenic Buffer Layer: Tuning Surface Work Function in All Polymer Blend Solar Cells

Analysis of the Effect of Active Layer Thickness on Polymer Solar Cell Performance Based on Optical and Opto-Electronic Model

Transform of Work Function of Poor-solvent Induced Active Layer Surface in All-polymer Solar Cells

Electron conducting buffer layers in organic photovoltaics

Effect of 8-hydroxyquinolatolithium buffer layer on the performance of polymer photovoltaic cells

Precise Control of Hole Transport Layer Integration on PDTS-DTTFBT: PC71BM Organic Solar Cells

Chemically Doped and Cross-Linked Hole-Transporting Materials As an Efficient Anode Buffer Layer for Polymer Solar Cells

Surface properties of buffer layers affect the performance of PM6:Y6–based organic photovoltaics

Vertical Distribution to Optimize Active Layer Morphology for Efficient All-Polymer Solar Cells by J71 As a Compatibilizer

Significant Enhancement in Built-In Potential and Charge Carrier Collection of Organic Solar Cells Using 4-(5-hexylthiophene-2-yl)-2,6-bis(5-trifluoromethyl)thiophen-2-yl)pyridi Ne As A Cathode Buffer Layer

Optoelectronic Analysis of Organic Solar Cells with Bphen as a Buffer Layer

Improved Hole Transfer and Charge Generation in All-Polymer Photovoltaic Blends with a P–i–N Structure

Improving Active Layer Morphology of All-Polymer Solar Cells by Dissolving the Two Polymers Individually

Decreased Domain Size and Improved Crystallinity by Adjusting Solvent–polymer Interaction Parameters in All‐polymer Solar Cells

Synergistic Effect of Solvent and Solid Additives on Morphology Optimization for High-Performance Organic Solar Cells

Efficient regulation of active layer morphology and interfacial charge-transfer process by porphyrin-based additive in organic solar cells

Efficiency Enhancement for Bulk Heterojunction Photovoltaic Cells Via Incorporation of Alcohol Soluble Conjugated Polymer Interlayer

Efficiency Enhancement of Polymer Solar Cells by Applying an Alcohol-Soluble Fullerene Aminoethanol Derivative As A Cathode Buffer Layer

An Acceptor–Donor–Acceptor Molecule Tailored Versatile Buffer Enabling Efficient and Stable Perovskite Solar Cells

Improving the Stabilities of Organic Solar Cells Via Employing a Mixed Cathode Buffer Layer

Impact of Solvent Additive on Morphology of High-Efficiency Ternary Blend Solar Cell