Abstract:The Euler–Lagrange method is a great way for multiphase bubble flow simulation, the detailed information of bubbles can be effortlessly obtained, and it is helpful for the efficiency and safety of different industry processes. Traditionally, the computational fluid dynamics-discrete bubble model (CFD-DBM) method has always been used to simulate this flow process. Nevertheless, the ability of the traditional CFD-DBM method is significantly limited in terms of the size ratio between the grid and bubble, where the grid size must be larger than the bubble size. In reality, the bubble may be larger than the grid and the grid/bubble size ratio can be very large due to the effects of complex bubble dynamics (such as the bubble breakup and coalescence) and complex internal flows. To address this issue, an improved CFD-DBM method is proposed in this study, which can be used for the simulation with a wide grid/bubble size ratio in gas–liquid–bubble multiphase simulation, and the volume of fluid (VOF) method is applied to capture the interface between gas and liquid phases. A gradient-based interpolation method is employed to reconstruct the liquid velocity around the target bubble when the grid size is much larger than the bubble size. If the bubble size is comparable with or larger than the grid size, the interphase force correction and the field smoothing will be carried out within a spherical support area. Subsequently, the proposed model is validated by the comparison with a bubble column experiment, in terms of the bubble size distribution and bubble vertical velocity. The results demonstrate the high accuracy of the new method. Finally, the influence of different parameters including normal spring stiffness, critical Weber number, and the range of the spherical support area on the bubble flow is investigated.

Computational Fluid Dynamics (CFD) Numerical Simulation and Particle Image Velocimetry (PIV) Measurement of a Packed Flotation Column

Experimental and Numerical Investigations of Scale-Up Effects on the Hydrodynamics of Slurry Bubble Columns

Hydrodynamics of New Structured Packings: an Experimental and Micro-scale CFD Study

CFD Simulation and Experiments of Dynamic Parameters in Gas–solid Fluidized Bed

Effect of sieve plate packing on bubble size distribution in a cyclonic flotation column

Velocity Field Distribution of Flotation Fluid in the Sieved-Flotation Column

An Improved Computational Fluid Dynamics-Discrete Bubble Model for Multiphase Bubble Flow Simulation with a Wide Grid/bubble Size Ratio

Flow of Gas-Liquid-solid System and Its Application in Packed Flotation Column

Intensification of Random Packing Via CFD Simulation, PIV Measurement and Traditional Experiments

CFD Simulation of Flow and Mass Transfer in Structured Packing Distillation Columns

Three-dimensional Computational Fluid Dynamics Modeling of Two-phase Flow in a Structured Packing Column

Portraying the Countercurrent Flow on Packings by Three‐Dimensional Computational Fluid Dynamics Simulations

Cfd Simulations of Flow Characteristics in Pulsed-Sieve-Plate Extraction Columns

Study of a Novel Fluidized Bed Flotation Column with Enhanced Bubble Dispersion

An experimental study of copper sulfide flotation in a packed cyclonic–static microbubble flotation column

Augmented CFD–PBM Simulation of Liquid–Liquid Two-Phase Flows in Liquid Extraction Columns with Wettable Internal Plates

Progress of Simulation of Fluid Flow Behavior in Structured Packed Column by Computational Fluid Dynamics

3D CFD simulation of the liquid flow in a rotating packed bed with structured wire mesh packing

Investigation of countercurrent flow profile and liquid holdup in random packed column with local CFD data

Research on CFD Numerical Simulation and Flow Field Characteristics of Countercurrent-Cocurrent Dissolved Air Flotation.

CFD numerical simulation for solid-liquid separation effect of rotational flow sedimentation tank