Abstract:The p–i–n photocathode architectures for Sb2(S, Se)3 devices are rarely reported as growth of Sb2(S, Se)3 strongly depends on the substrate. Herein, a comparison between three hole‐transporting layers as the underlying substrate reveals the superior properties of CuI over CuS and NiO. The improvement is attributed to the compact morphology of the Sb2(S, Se) films. Sb2(S, Se)3 is a promising photocathode for photoelectrochemical (PEC) conversion of solar energy to hydrogen due to its excellent optoelectronic properties, stability, and low toxicity. For such applications, a p–i–n device architecture is favorable for efficient charge separation, with the p‐type layer improving hole extraction while the n‐type layer facilitates electron injection into the electrolyte for hydrogen evolution reaction. However, the lack of suitable p‐type layers for depositing a uniform layer of Sb2(S, Se)3 photocathode constrains the device architectures for PEC water splitting. In this work, various p‐type materials (e.g., NiO, CuS, and CuI) are investigated. Photocathodes fabricated on CuI demonstrate superior performance due to improved hole extraction and uniform growth of Sb2(S, Se)3 absorber layer. The Se/S ratio is adjusted to further fine‐tune the photocathode's absorption, influencing the efficiency of charge carriers' injection and separation. The overall PEC performance reaches the maximum value when Se/S = 20%, achieving up to 4.2 mA cm−2 with stable photocurrents sustained for 120 min under standard illumination conditions, achieving the highest‐reported photocurrent among S‐rich‐solution‐processed Sb2(S, Se)3 photocathodes. In this work, new avenues are opened for the design of p–i–n Sb2(S, Se)3 PEC devices.

Humidity Sensitive Polymers in Solution Processed Adjustable Pore-Volume Cu(In,Ga)S2 Photocathodes for Solar Hydrogen Production

CuBi2O4/CuO Heterojunction Coated with Electrodeposited ZnO Overlayer for Stable Solar Hydrogen Evolution

Highly Efficient 2D/3D Structured CuCo2S4/CdIn2S4 Composites with a P–n Heterojunction for Boosting Photocatalytic Hydrogen Evolution

Enhancement of Solar-to-hydrogen Conversion Efficiency in Water Splitting by Optimizing Morphology of Cu2O Nanostructure and Surface Modification

Solution-processed CuSbS2 Thin Film: A Promising Earth-Abundant Photocathode for Efficient Visible-Light-driven Hydrogen Evolution

Photocurrent Improvement in Nanocrystalline Cu2ZnSnS4 Photocathodes by Introducing Porous Structures

Enhancing Photocathodic Performances of Particulate-CuGaS2-Based Photoelectrodes via Conjugation with Conductive Organic Polymers for Efficient Solar-Driven Hydrogen Production and CO2 Reduction

Scalable Low-Band-Gap Sb2Se3 Thin-Film Photocathodes for Efficient Visible-Near-Infrared Solar Hydrogen Evolution

Wittichenite semiconductor of Cu3BiS3 films for efficient hydrogen evolution from solar driven photoelectrochemical water splitting

Scalable Low-Bandgap Sb2Se3 Thin-Film Photocathodes for Efficient Visible-Near-Infrared Solar Hydrogen Evolution.

Enhancing Photocatalytic Activities for Sustainable Hydrogen Evolution on Structurally Matched CuInS2/ZnIn2S4 Heterojunctions

CdxZn1-xS/Sb2Se3 thin film photocathode for efficient solar water splitting

Chemical bath deposition of SnS:Cu/ZnS for solar hydrogen production and solar cells

Doping and orientation regulation of p-type Cu:CdS1−Se /Pt thin film photocathodes for enhanced photoelectrochemical water splitting

General In Situ Photoactivation Route with IPCE over 80% toward CdS Photoanodes for Photoelectrochemical Applications

Engineering MoS X /ti/inp Hybrid Photocathode for Improved Solar Hydrogen Production

PTB7:PC61BM Bulk Heterojunction-Based Photocathodes for Efficient Hydrogen Production in Aqueous Solution

Bi2S3‐Cu3BiS3 Mixed Phase Interlayer for High‐Performance Cu3BiS3‐Photocathode for 2.33% Unassisted Solar Water Splitting Efficiency

Earth‐Abundant Tin Sulfide‐Based Photocathodes for Solar Hydrogen Production

Unveiling the Dual Impact of CuI Layer and Se Content in Sb2(S, Se)3 Photocathodes for Solar Water Splitting

Hydrogen-substituted graphdiyne encapsulated cuprous oxide photocathode for efficient and stable photoelectrochemical water reduction