Abstract:It’s a critical issue for the successful commercialization of solid oxide fuel cells (SOFCs) to achieve long-term thermal stability without significant performance degradation. Current work reports a cost-competitive and scalable method for modifying porous Gadolinia doped ceria (GDC) barrier layers, to obtain an almost-dense, sintering-active, and Sr-blocking cathode/electrolyte interface, by growing nanoparticles in-situ on porous surfaces. The cell performance only deteriorates by ~0.5% after 20 times thermal cycles as the temperature fluctuated between 200 and 750 ℃, which is more prominent enhancement than ~16% for pristine cell, and exhibits higher initial performance. The hydrothermal modified symmetric cell shows ~60% polarization resistance decrease and well-attached cathode/electrolyte interfaces after ~1200 hours of operation, exhibiting excellent stability while the pristine cell interfaces peeled off. The performance improvements and prolonged operation mechanisms are discussed and mainly attributed to the almost-dense barrier layer and robust cathode/electrolyte interfaces.It’s a critical issue for the successful commercialization of solid oxide fuel cells (SOFCs) to achieve long-term thermal stability without significant performance degradation. Current work reports a cost-competitive and scalable method for modifying porous Gadolinia doped ceria (GDC) barrier layers, to obtain an almost-dense, sintering-active, and Sr-blocking cathode/electrolyte interface, by growing nanoparticles in-situ on porous surfaces. The cell performance only deteriorates by ~0.5% after 20 times thermal cycles as the temperature fluctuated between 200 and 750 ℃, which is more prominent enhancement than ~16% for pristine cell, and exhibits higher initial performance. The hydrothermal modified symmetric cell shows ~60% polarization resistance decrease and well-attached cathode/electrolyte interfaces after ~1200 hours of operation, exhibiting excellent stability while the pristine cell interfaces peeled off. The performance improvements and prolonged operation mechanisms are discussed and mainly attributed to the almost-dense barrier layer and robust cathode/electrolyte interfaces.

Effect of Grain Boundary Diffusion on Electrolyte Stability in Direct Carbon Fuel Cells with Antimony Anodes

Plasma-spray Derived, Corrosion-Resistive Electrolyte for Liquid Antimony Anode Direct Carbon Fuel Cell

Stability of YSZ and SDC in Molten Carbonate Eutectics for Hybrid Direct Carbon Fuel Cells

Enhancement of the Cathode/electrolyte Interface by a Sintering-Active Barrier Layer for Solid Oxide Fuel Cells

Reaction Characteristics of Direct Carbon Fuel Cell with YSZ Single Crystal Electrolyte and Molten Sn Anode

Effects of Interface Roughness on A Liquid-Sb-Anode Solid Oxide Fuel Cell

Liquid Antimony Anode Fluidization Within A Tubular Direct Carbon Fuel Cell

Preparation and characterization of nanocrystalline Ce0.8Sm0.2O1.9 for low temperature solid oxide fuel cells based on composite electrolyte

Preparation of SDC Interlayer and Influence on Performances of Anode Supported Solid Oxide Fuel Cells

Numerical Simulation and Experimental Characterization of the Performance Evolution of A Liquid Antimony Anode Fuel Cell

Stability of Ni-YSZ Anode for SOFCs in Methane Fuel: the Effects of Infiltrating La0.8Sr0.2FeO3-δand Gd-Doped CeO2Materials

Preparation, Evaluation, and Application of SUS430/441 Interconnect with Mn-Co Coating in Solid Oxide Fuel Cells

Performance Characteristics of Liquid Antimony Anode Direct Carbon Fuel Cell

Interdiffusion between gadolinia doped ceria and yttria stabilized zirconia in solid oxide fuel cells: Experimental investigation and kinetic modeling

Enhanced Cathode/Electrolyte Interface by a Nano-Modified Barrier Layer for Solid Oxide Fuel Cells

Samaria-Doped Ceria Electrolyte Supported Direct Carbon Fuel Cell with Molten Antimony As the Anode

Composite Electrolyte Based On Nanostructured Ce0.8sm0.2o1.9 (Sdc) For Low-Temperature Solid Oxide Fuel Cells

Fabrication of YSZ/SNDC Bilayer Electrolytes by Spark Plasma Sintering

Mechanism for carbon direct electrochemical reactions in a solid oxide electrolyte direct carbon fuel cell

Liquid Antimony Anode Direct Carbon Fuel Cell Fueled with Mass-Produced De-Ash Coal

Impact of yttria-stabilized zirconia contents in nickel cermet anodes for intermediate temperature-operated syngas-fueled thin film solid oxide fuel cells