A Novel Mixture of Lithium Bis(oxalato)borate, Gamma-Butyrolactone and Non-Flammable Hydrofluoroether As a Safe Electrolyte for Advanced Lithium Ion Batteries

Pei Shi,Shaohua Fang,Jun Huang,Dong Luo,Li Yang,Shin-ichi Hirano

DOI: https://doi.org/10.1039/c7ta05743a

2017-01-01

Abstract:A safe electrolyte supported graphite/LiCo1/3Mn1/3Ni1/3O2 full cell to achieve excellent electrochemical performances.

What problem does this paper attempt to address?

A Safe Electrolyte Enriched with Flame-Retardant Solvents for High-Voltage LiCoO2||Graphite Pouch Cells

Chao Yang,Xing Zhou,Ruitao Sun,Wenxi Hu,Meilong Wang,Xiaoli Dong,Nan Piao,Jin Han,Wen Chen,Ya You

DOI: https://doi.org/10.1021/acsenergylett.4c02466

IF: 22

2024-01-01

ACS Energy Letters

Abstract:Employing a flame-retardant solvent (FRS) in the electrolyte has shown great potential for improving the safety of lithium-ion batteries (LIBs). Nevertheless, their poor compatibility with salts and commonly used solvents leads to the formation of a heterogeneous system, which drastically limits their concentration in the electrolyte and consequently deteriorates the safety performance. In this work, we employ a bridging solvent diethyl carbonate to raise the solubility of a highly effective FRS, ethoxy pentafluorocyclotriphosphonitrile (PFPN), to a concentration as high as 75 vol % in the electrolyte. The target electrolyte forms a stable N/P-rich cathode-electrolyte interface to protect the electrode from oxygen evolution and transition-metal ion dissolution, thereby enabling the LiCoO2 cathode to preserve 72% capacity retention over 500 cycles at 4.62 V. Moreover, this electrolyte can effectively delay occurrence time and improve the critical temperature of thermal runaway of 1 Ah LiCoO2||graphite pouch cells. Our work proposes a new direction for nonflammable electrolytes toward safe and high-energy LIBs.
A safe electrolyte for high-performance lithium-ion batteries containing lithium difluoro(oxalato)borate, gamma-butyrolactone and non-flammable hydrofluoroether

Yixuan Gu,Shaohua Fang,Li Yang,Shin-ichi Hirano

DOI: https://doi.org/10.1016/j.electacta.2021.139120

IF: 6.6

2021-01-01

Electrochimica Acta

Abstract:A safe electrolyte of lithium difluoro(oxalato)borate in the mixture of gamma-butyrolactone and 1,1,2,2-tetrafluoroethyl-2,2,3,3-tetrafluoropropyl ether is initially proposed in this work. This electrolyte owns higher safety level and better wettability than a commercial electrolyte. Its conductivity reaches 7.12 mS cm(-1) at 25 degrees C. The remarkable electrochemical performances of graphite/LiNi0.5Co0.2Mn0.3O2 full cells with this safe electrolyte are confirmed. Its cycling and rate performances present well at room tem-perature (25 degrees C). Meanwhile, high-temperature and low-temperature performances of the full cells with this safe electrolyte also surpass those of the cell with a commercial electrolyte. The capacity retention of the full cell with this safe electrolyte reaches 82.2% after the prolonged cycle test (500 cycles at 1 C and 25 degrees C). And its capacity retention of 100 cycles at 1 C is up to 87.1% at elevated temperature (60 degrees C). In particular, the cell still has a capacity of about 100 mAh g(-1) at-40 degrees C. The potential of this safe elec-trolyte for practical application has been proved by the test results. (C) 2021 Elsevier Ltd. All rights reserved.
A Safe Electrolyte Based on Propylene Carbonate and Non-Flammable Hydrofluoroether for High-Performance Lithium Ion Batteries

Pei Shi,Shaohua Fang,Dong Luo,Li Yang,Shin-Ichi Hirano

DOI: https://doi.org/10.1149/2.1181709jes

IF: 3.9

2017-01-01

Journal of The Electrochemical Society

Abstract:In this work, a safe electrolyte was formulated by mixing propylene carbonate with 1,1,2,2-tetrafluoroethyl-2,2,3,3-tetrafluoropropyl ether, in which fluoroethylene carbonate was used to improve the compatibility of electrolyte with graphite anode. It was found that this electrolyte showed high safety and good wettability to separator and electrodes, and its conductivity reached 5.04 mS cm(-1) at 25 degrees C. In particular, this safe electrolyte could well support graphite/LiCo1/3Mn1/3Ni1/3O2 full cells. Its rate and cycle performances at room temperature were close to those of a conventional electrolyte, and better cycle performance at elevated temperature (60 degrees C) was obtained. Moreover, it also showed excellent low-temperature performance, and the cell could even operate at -40 degrees C. (C) 2017 The Electrochemical Society. All rights reserved.
A Non-Flammable Electrolyte for Lithium-Ion Batteries Containing Lithium Difluoro(oxalato)borate, Propylene Carbonate and Tris(2,2,2-Trifluoroethyl)Phosphate

Yixuan Gu,Shaohua Fang,Xinyi Zhang,Yufeng Tang,Yanfeng Chen,Li Yang,Shin-ichi Hirano

DOI: https://doi.org/10.1149/1945-7111/ab8ed3

IF: 3.9

2020-05-11

Journal of The Electrochemical Society

Abstract:Lithium difluoro(oxalato)borate in the mixture of propylene carbonate andtris(2,2,2-trifluoroethyl)phosphate is introduced as a safe electrolyte for lithium-ion batteries.And fluoroethylene carbonate additive is used in this electrolyte to improve the compatibility withthe graphite anode. It is found that 25 wt% tris(2,2,2-trifluoroethyl)phosphate endows thiselectrolyte with non-flammable characteristic and good wettability to separator and electrodes. Thissafe electrolyte can well support graphite/LiNi 0.5 Co 0.2 Mn 0.3 O 2 full cells. Its cycleperformances at room temperature and elevated temperature (60 °C) surpass those of a commercialelectrolyte. And its rate performance at room temperature is also comparable to that of thecommercial electrolyte. These results indicate that such a safe electrolyte shows a great potentialfor practical application.

electrochemistry,materials science, coatings & films
A novel mixture of diethylene glycol diethylether and non-flammable methyl-nonafluorobutyl ether as a safe electrolyte for lithium ion batteries

shaohua fang,guojun wang,long qu,dong luo,li yang,shinichi hirano

DOI: https://doi.org/10.1039/c5ta05242d

IF: 11.9

2015-01-01

Journal of Materials Chemistry A

Abstract:A mixture of diethylene glycol diethylether and non-flammable methyl-nonafluorobutyl ether was introduced as a new electrolyte for lithium ion batteries. And a fluoroethylene carbonate additive was used in this electrolyte to improve the compatibility with the graphite anode. The non-flammability and high flash point of this electrolyte indicated its high safety. This electrolyte had low viscosity and its conductivity reached 3.8 mS cm(-1) at 25 degrees C. Graphite/LiFePO4 coin cells with commercial electrodes were utilized to evaluate the performances of the electrolyte. The rate, cycle and low-temperature performances of the graphite/LiFePO4 cells using this electrolyte were close to those of the cells using the conventional electrolytes with and without the fluoroethylene carbonate additive. These results indicated that this kind of safe electrolyte based on non-flammable hydrofluoroethers and solvents with a high flash point has great potential for practical application.
Ternary Mixtures of Nitrile-Functionalized Glyme, Non-Flammable Hydrofluoroether and Fluoroethylene Carbonate As Safe Electrolytes for Lithium-Ion Batteries

Yi Liu,Shaohua Fang,Pei Shi,Dong Luo,Li Yang,Shin-ichi Hirano

DOI: https://doi.org/10.1016/j.jpowsour.2016.09.087

IF: 9.2

2016-01-01

Journal of Power Sources

Abstract:New mixtures of 3-(2-methoxyethoxy)propanenitrile, fluoroethylene carbonate and 1,1,2,2-tetrafluoroethyl-2,2,3,3-tetrafluoropropyl ether are introduced as safe electrolytes for lithium-ion batteries. The electrolytes with 30 wt% 1,1,2,2-tetrafluoroethyl-2,2,3,3-tetrafluoropropyl ether can own high safety and better wettability to separator and electrodes than the conventional electrolyte. The oxidation potentials of these electrolytes are about 4.8 V versus Li/Li+, and their conductivity can reach 5.42 mS cm(-1) at 25 degrees C. Graphite/LiMn2O4 coin cells are used to evaluate the electrochemical performances, and this kind of safe electrolytes can exhibit better rate and cycle performances than the conventional electrolyte. These results indicate that such ternary electrolytes have a great potential for practical application. (C) 2016 Elsevier B.V. All rights reserved.
Safe Electrolytes for Lithium-Ion Batteries Based on Ternary Mixtures of Triethylene Glycol Dimethylether, Fluoroethylene Carbonate and Non-Flammable Methyl-Nonafluorobutyl Ether

Yi Liu,Shaohua Fang,Dong Luo,Li Yang,Shin-ichi Hirano

DOI: https://doi.org/10.1149/2.0701609jes

IF: 3.9

2016-01-01

Journal of The Electrochemical Society

Abstract:New mixtures of triethylene glycol dimethylether, fluoroethylene carbonate and non-flammable methyl-nonafluorobutyl ether were introduced as safe electrolytes for lithium-ion batteries. It was discovered that only 10 wt% methyl-nonafluorobutyl ether was enough to ensure high safety of electrolyte and better wettability to electrodes and separator than the conventional electrolyte. The conductivity of these ternary electrolytes could reach 4.8 mS cm(-1) at 25 degrees C. Graphite/LiFePO4 coin cells with commercial electrodeswere used to evaluate the electrochemical performances, and this kind of safe electrolytes could exhibit better rate and cycle performances than the conventional electrolyte. These results suggested that such ternary electrolytes composed of non-flammable hydrofluoroethers and solvents with high flash point had a great potential for practical application. (C) 2016 The Electrochemical Society. All rights reserved.
A Nonflammable Diethyl Ethylphosphonate-Based Electrolyte Improved by Synergistic Effect of Lithium Difluoro(Oxalato)Borate and Fluoroethylene Carbonate

Lihua Jiang,Yuan Cheng,Shuping Wang,Yifeng Cheng,Kaiqiang Jin,Jinhua Sun,Martin Winter,Isidora Cekic-Laskovic,Qingsong Wang

DOI: https://doi.org/10.1016/j.jpowsour.2023.233051

2023-01-01

Abstract:The vital physical and chemical properties of the lithium conducting salt, solvent/co-solvent and functional additive determine the overall properties and performance of the resulting electrolyte formulation. Explorations on right combinations of the carefully selected electrolyte components are expected to further balance the electrochemical and safety performances of chosen electrolyte formulations in given cell chemistries. In this study, a new nonaqueous aprotic electrolyte is designed by using lithium difluoro(oxalato)borate (LiODFB) as conducting salt, diethyl ethylphosphonate (DEEP) as solvent, and fluoroethylene carbonate (FEC) as co-solvent to achieve a nonflammable electrolyte formulation with competent electrochemical performance. The LiODFB and FEC are believed to take part in complex interfacial interactions with a synergistic effect. LiNi0.8Co0.1Mn0.1O2 (NCM811)||Li cells using the optimized electrolyte formulation of 1.3 M LiODFB/DEEP 30% FEC exhibits a stable long-term cycling performance at 1.0 C with a reversible average specific discharge capacity of 169.5 mAh g 1 during 100 cycles, which is comparable to cells using commercial electrolytes. Furthermore, the 1.3 M LiODFB/ DEEP 30% FEC electrolyte shows good thermal stability and effectively reduces the heat generation during thermal decomposition of NCM811 cathode. The results provide a good reference for the design of next generation of safe, nonflammable electrolytes for lithium-based battery application.
Design and Mechanism Study of High-Safety and Long-Life Electrolyte for High-Energy-Density Lithium-Ion Batteries

Zenghua Chang,Chenxi Ma,Rennian Wang,Bo Wang,Man Yang,Bin Li,Tianhang Zhang,Zhanhai Li,Peizhu Zhao,Xiaopeng Qi,Jiantao Wang

DOI: https://doi.org/10.1021/acsami.4c02237

IF: 9.5

2024-04-06

ACS Applied Materials & Interfaces

Abstract:Although nonflammable electrolytes are beneficial for battery safety, they often adversely affect the electrochemical performance of lithium-ion batteries due to their poor compatibility with electrodes. Herein, we design a nonflammable electrolyte consisting of cyclic carbonate and 2,2-difluoroethyl acetate (DFEA) solvents paired with several surface-film-forming additives, significantly improving the safety and cycling performance of NMC811||SiO(x)/graphite pouch cells. The DFEA solvent...

materials science, multidisciplinary,nanoscience & nanotechnology
Electrolyte Mixtures Based on Ethylene Carbonate and Dimethyl Sulfone for Li-Ion Batteries with Improved Safety Characteristics

Andreas Hofmann,Matthias Migeot,Eva Thißen,Michael Schulz,Ralf Heinzmann,Sylvio Indris,Thomas Bergfeldt,Boxia Lei,Carlos Ziebert,Thomas Hanemann

DOI: https://doi.org/10.1002/cssc.201500263

IF: 8.4

2015-06-08

ChemSusChem

Abstract:In this study, novel electrolyte mixtures for Li-ion cells are presented with highly improved safety features. The electrolyte formulations are composed of ethylene carbonate/dimethyl sulfone (80:20 wt/wt) as the solvent mixture and LiBF4 , lithium bis(trifluoromethanesulfonyl)azanide, and lithium bis(oxalato)borate as the conducting salts. Initially, the electrolytes are characterized with regard to their physical properties, their lithium transport properties, and their electrochemical stability. The key advantages of the electrolytes are high flash points of >140 °C, which enhance significantly the intrinsic safety of Li-ion cells containing these electrolytes. This has been quantified by measurements in an accelerating rate calorimeter. By using the newly developed electrolytes, which are liquid down to T=-10 °C, it is possible to achieve C-rates of up to 1.5 C with >80 % of the initial specific capacity. During 100 cycles in cell tests (graphite||LiNi1/3 Co1/3 Mn1/3 O2 ), it is proven that the retention of the specific capacity is >98 % of the third discharge cycle with dependence on the conducting salt. The best electrolyte mixture yields a capacity retention of >96 % after 200 cycles in coin cells.
Nonflammable Electrolytes for Lithium Ion Batteries Enabled by Ultraconformal Passivation Interphases

Xia Cao,Yaobin Xu,Linchao Zhang,Mark H. Engelhard,Lirong Zhong,Xiaodi Ren,Haiping Jia,Bin Liu,Chaojiang Niu,Bethany E. Matthews,Haiping Wu,Bruce W. Arey,Chongmin Wang,Ji-Guang Zhang,Wu Xu

DOI: https://doi.org/10.1021/acsenergylett.9b01926

IF: 22

2019-01-01

ACS Energy Letters

Abstract:The approaches enhancing the energy density of lithium (Li)-ion batteries (LIBs) often push the batteries to their safety limit. Therefore, electrolytes that not only enhance electrochemical performances but also improve safety properties of LIBs are urgently needed for further development of LIBs. Although organic phosphorus-containing solvents have been used with organic carbonates to form flame-retarding or nonflammable electrolytes, their poor compatibility with the graphite anodes leads to fast capacity fade of LIBs. Herein we report a promising approach by formulating a nonflammable localized high-concentration electrolyte based on triethyl phosphate, ethylene carbonate, and a partially fluorinated ether. This electrolyte readily generates a robust solid electrolyte interphase on the graphite anode and a cathode electrolyte interphase on the LiNi0.8Mn0.1Co0.1O2 (NMC811) cathode. As a result, this electrolyte shows good compatibility with both the graphite anode and the high-voltage cathode and enables long-term cycling stability of the graphite parallel to NMC811 cells. This work sheds new light in the development of nonflammable electrolytes for high-energy-density LIBs.
Nonflammable Electrolyte Based on Fluoroethylene Carbonate for High-Voltage LiCoO 2 /Si–Graphite Lithium-Ion Batteries

Handong Pan,Yixuan Gu,Tengxiao Lyu,Zhipeng Wang,Guoyu Wang,Yue Zhang,Minzhao Xue,Shaohua Fang

DOI: https://doi.org/10.1021/acsaem.2c03889

IF: 6.4

2023-01-27

ACS Applied Energy Materials

Abstract:An electrolyte for high-voltage LiCoO2/Si–graphite pouch cells is proposed in this work, which is composed of LiPF6 salt and fluoroethylene carbonate solvent as well as tris(trimethylsilyl) phosphate and (ethoxy)pentafluorocyclotriphosphazene additives. Tris(trimethylsilyl) phosphate additive plays a role in improving the interfacial properties of electrodes, and (ethoxy)pentafluorocyclotriphosphazene additive makes this electrolyte nonflammable. Its conductivity is as high as 5.48 mS cm–1 at 25 °C. This safe electrolyte also enables the high-voltage LiCoO2/Si–graphite pouch cells to obtain the ideal electrochemical performances. At room temperature, the capacity retention reaches 81.7% after 200 cycles at 1C, and the discharge capacity at 3C still retains about 77% of the capacity at 1C. Furthermore, the interfacial properties of electrodes are analyzed by scanning electron microscopy and X-ray photoelectron spectroscopy measurements.

materials science, multidisciplinary,chemistry, physical,energy & fuels
Non-flammable fluorobenzene-diluted highly concentrated electrolytes enable high-performance Li-metal and Li-ion batteries

Mengchuang Liu,Ziqi Zeng,Wei Zhong,Zicheng Ge,Longqing Li,Sheng Lei,Qiang Wu,Han Zhang,Shijie Cheng,Jia Xie

DOI: https://doi.org/10.1016/j.jcis.2022.03.133

IF: 9.9

2022-08-01

Journal of Colloid and Interface Science

Abstract:Lithium-ion batteries with Ni-rich cathode and flammable carbonate electrolytes are breeding severe safety concerns which hinds their application in electric vehicles. Herein, by introducing the fluorobenzene (FB) with a low-density and low-cost as cosolvent and bridge solvents in triethyl phosphate (TEP)-based diluted high-concentration electrolytes (DHCEs) system, we design a non-flammable electrolyte with a special solvation structure containing internal-external flame retardant. This non-flammable electrolyte not only solves successfully the incompatibility problem of TEP-based electrolyte to the Li-metal anode (LMA) and the graphite (Gr) anode, but also ensures the stable cycling of Li||LiNi0.7Co0.1Mn0.2O2 (86% capacity retention after 120 cycles) and Gr|| LiNi0.7Co0.1Mn0.2O2 (75% capacity retention after 200 cycles) full cells. Such design opens up a new window for developing new electrolyte systems and building safer high-energy-density batteries.

chemistry, physical
Nonflammable electrolyte with low exothermic design for safer lithium-based batteries

Shichao Zhang,Siyuan Li,Xinyang Wang,Chenchen Li,Yanxia Liu,Hao Cheng,Shulan Mao,Qian Wu,Zeyu Shen,Jiale Mao,Hongge Pan,Yingying Lu

DOI: https://doi.org/10.1016/j.nanoen.2023.108639

IF: 17.6

2023-06-25

Nano Energy

Abstract:Battery safety has always been a concern for high-energy-density configurations with nickel-rich cathode (Ni>0.6). Tremendous heat released from the reaction between highly flammable electrolyte and cathode under mechanical, thermal or electrical abuse may cause thermal runaway. Herein, we explore the heat release of various solvents with fully charged cathodes and summarized the solvent/heat release phase diagram. On this basis, we select fluorinated bis(2,2,2-trifluoroethyl) carbonate to prepare a nonflammable, low exothermic electrolyte. This electrolyte significantly reduces the maximum temperature by one-third and decreases the maximum heating rate from 206.0 o C s −1 to 82.6 o C s −1 during the thermal runaway process of commercial lithium-ion pouch cell. Moreover, it demonstrates remarkable compatibility with lithium metal anode. Benefited from the uniform solid-electrolyte interphase (SEI) rich in -CF 3 organic layer, the Li||LiNi 0.8 Co 0.1 Mn 0.1 O 2 (NCM811) full cell exhibits a capacity retention rate of 80% after 240 cycles. Notably, a 1.5 Ah Li metal pouch cell with a high energy density of 365 Wh kg −1 displays an excellent capacity retention of 90.02% after 98 cycles under realistic conditions. This work provides a novel approach to construct safer and longer-lasting lithium-based batteries by designing nonflammable and low exothermic electrolyte.

materials science, multidisciplinary,chemistry, physical,physics, applied,nanoscience & nanotechnology
Advanced Nonflammable Localized High‐Concentration Electrolyte For High Energy Density Lithium Battery

Mengmin Jia,Chi Zhang,Yawei Guo,Linshan Peng,Xiaoyan Zhang,Weiwei Qian,Lan Zhang,Suojiang Zhang

DOI: https://doi.org/10.1002/eem2.12246

2022-03-15

Abstract:The key to realize long life high energy density lithium batteries is to exploit functional electrolytes capable of stabilizing both high voltage cathode and lithium anode. The emergence of localized high-concentration electrolytes (LHCEs) shows great promise for ameliorating the above-mentioned interfacial issues. In this work, a lithium difluoro(oxalate)borate (LiDFOB) based nonflammable dual-anion LHCE is designed and prepared. Dissolving in the mixture of trimethyl phosphate (TMP) /1,1,2,2-tetrafluoroethyl-2,2,3,3-tetrafluoropropylether (D2), the continuously consumption of LiDFOB is suppressed by simply introducing lithium nitrate (LiNO3). Meantime, as most of the TMP molecular are coordinate with Li+, the electrolyte does not show incompatibility issue between neither metal lithium nor graphite anode. Therefore, it demonstrates excellent capability in stabilizing the interface of Ni rich cathode and regulating lithium deposition morphology. The Li||LiNi0.87Co0.08Mn0.05O2 (NCM87) batteries exhibit high capacity retention of more than 90% after 200 cycles even under the high cut-off voltage of 4.5 V, 1 C rate. This study offers a prospective method to develop safe electrolytes suitable for high voltage applications, thus providing higher energy densities.

materials science, multidisciplinary
Highly Fluorinated Co-Solvent Enabling Ether Electrolyte for High-Voltage Lithium Ion Batteries with Graphite Anode

Ruo Wang,Haonan Wang,Huajun Zhao,Mingman Yuan,Zhongbo Liu,Guangzhao Zhang,Tong Zhang,Yunxian Qian,Jun Wang,Iseult Lynch,Yonghong Deng

DOI: https://doi.org/10.20517/energymater.2023.28

2023-01-01

Energy Materials

Abstract:Conventional ether electrolytes are generally considered unsuitable for use with graphite anodes and high-voltage cathodes due to their co-intercalation with graphite and poor oxidation stability, respectively. In this work, a highly fluorinated ether molecule, 1,1,1-trifluoro-2-[(2,2,2-trifluoroethoxy) methoxy] ethane (TTME), is introduced as a co-solvent into the conventional ether system to construct a fluorinated ether electrolyte, which not only avoids the co-intercalation with graphite but also is compatible with high-voltage cathodes. Li||graphite half-cells using the fluorinated ether electrolyte deliver stable cycling with a capacity retention of 91.7% for 300 cycles. Moreover, LiNi0.8Co0.1Mn0.1O2 (NCM811)||graphite and LiCoO2 (LCO)||graphite full-cells (cathode loadings are approximate to 3 mAh/cm(2)) with the fluorinated ether electrolyte show capacity retentions of > 90% over 200 cycles with a charge cut-off voltage of 4.4 V and > 97% for 100 cycles with a charge cut-off voltage of 4.5 V, respectively. The dense and firm solid electrolyte interphase (SEI) and cathode electrolyte interphase (CEI) formed by the fluorinated ether electrolyte on the anode and cathode, respectively, are key to excellent cell performance. These results have significance for the subsequent application of ether electrolytes for high-voltage lithium ion batteries (up to 4.5 V) with graphite anodes.
Design of Fire‐Resistant Liquid Electrolyte Formulation for Safe and Long‐Cycled Lithium‐Ion Batteries

Kihun An,Yen Hai Thi Tran,Sehyun Kwak,Jisoo Han,Seung‐Wan Song

DOI: https://doi.org/10.1002/adfm.202106102

IF: 19

2021-08-27

Advanced Functional Materials

Abstract:Turning an unsafe material into a safe one without performance loss for Li-ion battery applications provides opportunities to create a new class of materials. Herein, this strategy is utilized to design a fire-resistant liquid electrolyte formulation consisting of propylene carbonate and 2,2,2-trifluoroethyl group-containing linear ester solvents paired with 1 m LiPF6 salt and fluoroethylene carbonate additive for a Li–ion battery with improved safety and performance. Traditional carbonate-based electrolytes offer good performance in mild operating conditions, but are however a flammable fuel causing fire and safety hazards. It is shown that the entire replacement of linear carbonate with fluorinated linear ester yields a fire-resistant and outperforming electrolyte under the harsh condition of 4.5 V high-voltage, 45 °C and 2C rate, enabling a higher energy, longer cycle life of 500 cycles, faster charged practical graphite‖NCM622 full-cell than traditional electrolyte-based cell. The strong correlation between cathode–electrolyte and anode–electrolyte interfacial stabilization and highly reversible cycling performance is clearly demonstrated. The fire-resistant electrolyte-incorporated industrial 730 mAh graphite‖NCM811 Li-ion pouch battery achieves 82% retention after 400 cycles under 4.3 V charge voltage, 45 °C and 1C, and markedly improved safety on overcharge abuse tests. The design strategy for electrolyte formulation provides a promising path to safe and long-cycled high-energy Li-ion batteries.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
A non-flammable electrolyte for long-life lithium ion batteries operating over a wide-temperature range

Yixuan Gu,Shaohua Fang,Li Yang,Shin-ichi Hirano

DOI: https://doi.org/10.1039/d1ta01088c

IF: 11.9

2021-01-01

Journal of Materials Chemistry A

Abstract:A LiPF 6 -GBL/FPPN (96 : 4) + 2 wt% LiODFB electrolyte shows a high safety level and conductivity. It can sustain graphite/LiNi 0.5 Co 0.2 Mn 0.3 O 2 full cells to obtain remarkable electrochemical performances over a wide-temperature operating range.

materials science, multidisciplinary,chemistry, physical,energy & fuels
Design of Non‐Incendive High‐Voltage Liquid Electrolyte Formulation for Safe Lithium‐Ion Batteries

Sehyun Kwak,Kihun An,Yen Hai Thi Tran,Seung‐Wan Song

DOI: https://doi.org/10.1002/cssc.202102546

IF: 8.4

2021-12-23

ChemSusChem

Abstract:Battery safety has an ever-increasing significance and is required for consumer's safety. The high flammability of traditional organic liquid electrolyte, which consists of ethylene carbonate and highly flammable linear carbonate, is one of the major reasons for thermal runaway and battery fire events. Replacement of flammable liquid electrolyte with non-incendive one is urgently needed for safe lithium-ion batteries. A fluorinated linear sulfate paired with 1 m LiPF6 was developed and evaluated as a solvent of non-incendive liquid electrolyte for a use in high-voltage (4.4 V) and high-temperature (45 °C) LiNi0.82 Mn0.07 Co0.11 O2 (NCM811) chemistry-based lithium-ion batteries. Non-incendive liquid electrolyte containing sulfate with two trifluoroethyl groups exhibited superior anodic and thermal stability and promoted cathode-electrolyte and anode-electrolyte interfacial stability, compared to flammable traditional electrolyte. Non-incendive electrolyte showed markedly improved 300 cycle performance of an industrial graphite‖NCM811 lithium-ion pouch cell with a nominal capacity of 730 mAh under harsh conditions, and high safety of 10 V overcharge abuse tolerance, from which safe and high-performing high-energy lithium-ion batteries and battery-powered electric vehicles and energy storage system are anticipated.

chemistry, multidisciplinary,green & sustainable science & technology
An Ultralow‐concentration and Moisture‐resistant Electrolyte of Lithium Difluoro(oxalato)borate in Carbonate Solvents for Stable Cycling in Practical Lithium‐ion Batteries

Zhishan Liu,Wentao Hou,Haoran Tian,Qian Qiu,Irfan Ullah,Shen Qiu,Wei Sun,Qian Yu,Jinliang Yuan,Lan Xia,Xianyong Wu

DOI: https://doi.org/10.1002/anie.202400110

2024-03-16

Angewandte Chemie International Edition

Abstract:The electrolyte concentration not only impacts the battery performance but also affects the battery cost and manufacturing. Currently, most studies focus on high-concentration (>3 M) or localized high-concentration electrolytes (~1 M); however, the expensive lithium salt imposes a major concern. Most recently, ultralow concentration electrolytes (<0.3 M) have emerged as intriguing alternatives for battery applications, which feature low cost, low viscosity, and extreme-temperature operation. However, at such an early development stage, many works are urgently needed to further understand the electrolyte properties. Herein, we introduce an ultralow concentration electrolyte of 2 wt.% (0.16 M) lithium difluoro(oxalato)borate (LiDFOB) in standard carbonate solvents. This electrolyte exhibits a record-low salt/solvent mass ratio reported to date, thus pointing to a superior low cost. Furthermore, this electrolyte is highly compatible with commercial Li-ion materials, forming stable and inorganic-rich interphases on the lithium cobalt oxide (LiCoO2) cathode and graphite anode. Consequently, the LiCoO2-graphite full cell demonstrates excellent cycling performance. Besides, this electrolyte is moisture-resistant and effectively suppresses the generation of hydrogen fluoride, which will markedly facilitate the battery assembly and recycling process under ambient conditions.

chemistry, multidisciplinary

A Novel Mixture of Lithium Bis(oxalato)borate, Gamma-Butyrolactone and Non-Flammable Hydrofluoroether As a Safe Electrolyte for Advanced Lithium Ion Batteries

A Safe Electrolyte Enriched with Flame-Retardant Solvents for High-Voltage LiCoO2||Graphite Pouch Cells

A safe electrolyte for high-performance lithium-ion batteries containing lithium difluoro(oxalato)borate, gamma-butyrolactone and non-flammable hydrofluoroether

A Safe Electrolyte Based on Propylene Carbonate and Non-Flammable Hydrofluoroether for High-Performance Lithium Ion Batteries

A Non-Flammable Electrolyte for Lithium-Ion Batteries Containing Lithium Difluoro(oxalato)borate, Propylene Carbonate and Tris(2,2,2-Trifluoroethyl)Phosphate

A novel mixture of diethylene glycol diethylether and non-flammable methyl-nonafluorobutyl ether as a safe electrolyte for lithium ion batteries

Ternary Mixtures of Nitrile-Functionalized Glyme, Non-Flammable Hydrofluoroether and Fluoroethylene Carbonate As Safe Electrolytes for Lithium-Ion Batteries

Safe Electrolytes for Lithium-Ion Batteries Based on Ternary Mixtures of Triethylene Glycol Dimethylether, Fluoroethylene Carbonate and Non-Flammable Methyl-Nonafluorobutyl Ether

A Nonflammable Diethyl Ethylphosphonate-Based Electrolyte Improved by Synergistic Effect of Lithium Difluoro(Oxalato)Borate and Fluoroethylene Carbonate

Design and Mechanism Study of High-Safety and Long-Life Electrolyte for High-Energy-Density Lithium-Ion Batteries

Electrolyte Mixtures Based on Ethylene Carbonate and Dimethyl Sulfone for Li-Ion Batteries with Improved Safety Characteristics

Nonflammable Electrolytes for Lithium Ion Batteries Enabled by Ultraconformal Passivation Interphases

Nonflammable Electrolyte Based on Fluoroethylene Carbonate for High-Voltage LiCoO 2 /Si–Graphite Lithium-Ion Batteries

Non-flammable fluorobenzene-diluted highly concentrated electrolytes enable high-performance Li-metal and Li-ion batteries

Nonflammable electrolyte with low exothermic design for safer lithium-based batteries

Advanced Nonflammable Localized High‐Concentration Electrolyte For High Energy Density Lithium Battery

Highly Fluorinated Co-Solvent Enabling Ether Electrolyte for High-Voltage Lithium Ion Batteries with Graphite Anode

Design of Fire‐Resistant Liquid Electrolyte Formulation for Safe and Long‐Cycled Lithium‐Ion Batteries

A non-flammable electrolyte for long-life lithium ion batteries operating over a wide-temperature range

Design of Non‐Incendive High‐Voltage Liquid Electrolyte Formulation for Safe Lithium‐Ion Batteries

An Ultralow‐concentration and Moisture‐resistant Electrolyte of Lithium Difluoro(oxalato)borate in Carbonate Solvents for Stable Cycling in Practical Lithium‐ion Batteries