Abstract:Efficient and accurate locomotion mode recognition is the basis and the key to compliance control of exoskeleton. Considering the fact that single ground reaction force information can not realize continuous gait phase recognition in the whole gait cycle and traditional inertial sensors' installation method tends to cause binding error, this paper established a wearable gait analysis system based on inertial sensor and foot pressure sensor which entirely embedded in a shoe insole. An inertial sensor mounting structure for foot posture information acquisition was designed to reduces the binding errors caused by the uncertain binding position and the random errors caused by the relative position changes with the movement. Two force sensors was set to measure the force load on the shoe insole at the heel and the forefoot during walking. Then, the gait curve of the normal human beings measured by this wearable gait analysis system is segmented by a periodic segmentation method combining power spectrum and feature points, and features is extracted from the time series of sensor signals according to the characteristics of the human gait. Probabilistic neural network is used to identify the locomotion modes and to verify the effectiveness of this wearable gait analysis system, experiments on different terrains are performed. The experiment results show that this method can effectively reduce binding error and random error, and reflect the foot movement during walking. Furthermore, the measurement method can accurately and effectively identify level-ground walking, stair ascent and stair decent, showing great potential for further development and applicability in control of exoskeleton.

Design of a Wearable Sensing System for a Lower Extremity Exoskeleton

Design and Performance Evaluation of a Wearable Sensing System for Lower-Limb Exoskeleton.

Development of Smart Wearable Exoskeleton Robot

SWINGING LEG CONTROL OF A LOWER LIMB EXOSKELETON VIA A SHOE WITH IN-SOLE SENSING

Design and Gait Realization of Power-assisted Lower Limbs Exoskeleton

Design and Optimization of Human-Machine Interaction Wearable Device for Lower Limb Rehabilitation Exoskeleton

A laser-engraved wearable gait recognition sensor system for exoskeleton robots

Design and Implementation of a Lower Extremity Exoskeleton for Walking Assist

Design of a Purely Mechanical Sensor-Controller Integrated System for Walking Assistance on an Ankle-Foot Exoskeleton

Design and Voluntary Motion Intention Estimation of a Novel Wearable Full-Body Flexible Exoskeleton Robot

Development and Hybrid Control of an Electrically Actuated Lower Limb Exoskeleton for Motion Assistance.

Locomotion Mode Recognition Based on Foot Posture and Ground Reaction Force

Adaptive Neuro-Fuzzy Control Based Development of A Wearable Exoskeleton Leg for Human Walking Power Augmentation

Design and Experimental Evaluation of Wearable Lower Extremity Exoskeleton with Gait Self-adaptivity

AN INTEGRATED LOWER EXOSKELETON SYSTEM TOWARDS DESIGN OF A PORTABLE ACTIVE ORTHOTIC DEVICE

Research of SMC-UDE Control for Lower Limb Wearable Exoskeleton Robot

Influence of a Compatible Design on Physical Human-Robot Interaction Force: a Case Study of a Self-Adapting Lower-Limb Exoskeleton Mechanism

Development of a lower extremity exoskeleton suit actuated by hydraulic

Control strategy of the lower-limb exoskeleton based on the EMG signals

Design and Gait Control of an Active Lower Limb Exoskeleton for Walking Assistance

Development and Validation of a Modular Sensor-Based System for Gait Analysis and Control in Lower-Limb Exoskeletons