Abstract:The human hand plays a role in a variety of daily activities. This intricate instrument is vulnerable to trauma or neuromuscular disorders. Wearable robotic exoskeletons are an advanced technology with the potential to remarkably promote the recovery of hand function. However, the still face persistent challenges in mechanical and functional integration, with real-time control of the multiactuators in accordance with the motion intentions of the user being a particular sticking point. In this study, we demonstrated a newly-designed wearable robotic hand exoskeleton with multijoints, more degrees of freedom (DOFs), and a larger range of motion (ROM). The exoskeleton hand comprises six linear actuators (two for the thumb and the other four for the fingers) and can realize both independent movements of each digit and coordinative movement involving multiple fingers for grasp and pinch. The kinematic parameters of the hand exoskeleton were analyzed by a motion capture system. The exoskeleton showed higher ROM of the proximal interphalangeal and distal interphalangeal joints compared with the other exoskeletons. Five classifiers including support vector machine (SVM), K-near neighbor (KNN), decision tree (DT), multilayer perceptron (MLP), and multichannel convolutional neural networks (multichannel CNN) were compared for the offline classification. The SVM and KNN had a higher accuracy than the others, reaching up to 99%. For the online classification, three out of the five subjects showed an accuracy of about 80%, and one subject showed an accuracy over 90%. These results suggest that the new wearable exoskeleton could facilitate hand rehabilitation for a larger ROM and higher dexterity and could be controlled according to the motion intention of the subjects.

Enable Intuitive and Immersive Teleoperation: Design, Modeling and Control of a Novel Wearable Exoskeleton

A Wearable Upper Limb Exoskeleton for Intuitive Teleoperation of Anthropomorphic Manipulators

Beyond End-Effector: Utilizing High-Resolution Tactile Signals for Physical Human–Robot Interaction

An Agile Large-Workspace Teleoperation Interface Based on Human Arm Motion and Force Estimation

Development of Smart Wearable Exoskeleton Robot

Exoskeleton Arm with Force Feedback for Robot Bilateral Teleoperation

Novel 6-Dof Wearable Exoskeleton Arm with Pneumatic Force-Feedback for Bilateral Teleoperation

Enabling intuitive and effective micromanipulation: A wearable exoskeleton-integrated macro-to-micro teleoperation system with a 3D electrothermal microgripper

Human-in-the-Loop Control of a Wearable Lower Limb Exoskeleton for Stable Dynamic Walking

Design and Performance Analysis of a Bioelectronic Controlled Hybrid Serial-Parallel Wrist Exoskeleton

Control of Newly-Designed Wearable Robotic Hand Exoskeleton Based on Surface Electromyographic Signals

Robotic Teleoperation Systems Using a Wearable Multimodal Fusion Device

Human-Inspired Control of Dual-Arm Exoskeleton Robots With Force and Impedance Adaptation

Research on master-slave teleoperation control algorithm based on exoskeleton master hand

Wearable teleoperation controller with 2-DoF robotic arm and haptic feedback for enhanced interaction in virtual reality

Wearable Extra Robotic Limbs: A Systematic Review of Current Progress and Future Prospects

HAT: Head-Worn Assistive Teleoperation of Mobile Manipulators

Walking and scuba diving assisted amphibious exoskeleton robots: the designing of power assist control and myoelectricity based wearers' fatigue evaluation

Low cost exoskeleton manipulator using bidirectional triboelectric sensors enhanced multiple degree of freedom sensory system

TeLeMan: Teleoperation for Legged Robot Loco-Manipulation using Wearable IMU-based Motion Capture

A heterogeneous master-slave teleoperation method for 7-DOF manipulator