Abstract:Teleoperated manipulation under the human intelligence is an effective solution to confront complicated tasks in unknown environments. However, the uncertain contact in environments is the main challenge to achieve good teleoperation, and some inevitable issues such as nonlinearities, various uncertainties, constraints, and communication delays in local and remote robots should also be taken into account. In this article, a unified contact model is proposed to be the targeted environment interaction for remote robot, which can cover various conditions such as free motion and rigid contact by setting different model parameters. Subsequently, a hybrid motion/force controller is developed to cope with nonlinearities and various uncertainties by adaptive robust technique, thus guaranteeing system stability and good transient convergence to the unified contact model. Particularly, to handle misteleoperation or sudden change of conditions described in unified contact model, a model predictive control-based contact optimization method is developed to be the outer loop of hybrid motion/force controller, which plans the desired motion and force trajectories that meet the state and targeted interaction constraints. By the estimation and transmission of environment parameter, the environment dynamics is reconstructed in the local side, which provides the effective force feedback of remote contact environment for human operator. Since the signal transmitted is replaced by the estimated environment parameter, the power-cycle in communication channel is eliminated. This design can avoid the passivity stability problem caused by communication delays, so the stability and good transparency under delays can be guaranteed by the separate design of local and remote controllers. The comparative experiments are implemented and verify the effectiveness of proposed framework for teleoperated manipulation.

A Wearable Upper Limb Exoskeleton for Intuitive Teleoperation of Anthropomorphic Manipulators

Enable Intuitive and Immersive Teleoperation: Design, Modeling and Control of a Novel Wearable Exoskeleton

An Upper-Limb Power-Assist Exoskeleton Using Proportional Myoelectric Control

An Agile Large-Workspace Teleoperation Interface Based on Human Arm Motion and Force Estimation

Exoskeleton Arm with Force Feedback for Robot Bilateral Teleoperation

Enabling intuitive and effective micromanipulation: A wearable exoskeleton-integrated macro-to-micro teleoperation system with a 3D electrothermal microgripper

Intelligent robotic arm for human pose recognition based on teleoperation system

ACE: A Cross-Platform Visual-Exoskeletons System for Low-Cost Dexterous Teleoperation

TeLeMan: Teleoperation for Legged Robot Loco-Manipulation using Wearable IMU-based Motion Capture

Unified Contact Model and Hybrid Motion/force Control for Teleoperated Manipulation in Unknown Environments

A Dexterous Hand-Arm Teleoperation System Based on Hand Pose Estimation and Active Vision

Control of Newly-Designed Wearable Robotic Hand Exoskeleton Based on Surface Electromyographic Signals

Novel 6-Dof Wearable Exoskeleton Arm with Pneumatic Force-Feedback for Bilateral Teleoperation

Robotic Teleoperation Systems Using a Wearable Multimodal Fusion Device

Bimanual Telemanipulation with Force and Haptic Feedback and Predictive Limit Avoidance

Low cost exoskeleton manipulator using bidirectional triboelectric sensors enhanced multiple degree of freedom sensory system

A Robot Learning Method with Physiological Interface for Teleoperation Systems

Morphology agnostic gesture mapping for intuitive teleoperation of construction robots

Bimanual Telemanipulation with Force and Haptic Feedback through an Anthropomorphic Avatar System

A Robotic Teleoperation System for Precise Robotic Manipulation by Human-Machine Interaction

EMG-Controlled Non-Anthropomorphic Hand Teleoperation Using a Continuous Teleoperation Subspace