Abstract:The properties of nonvolatile memristive devices (NMD) fabricated utilizing organic/inorganic hybrid nanocomposites were investigated due to their superior advantages such as mechanical flexibility, low cost, low-power consumption, simple technological process in fabrication and high reproducibility. The current-voltage (I-V) curves for the Al/polyvinylpyrrolidone (PVP): graphene quantum-dot (GQD)/in-dium-tin-oxide (ITO) memristive devices showed current bistability characteristics at 300 K. The window margins corresponding to the high-conductivity (ON) state and the low-conductivity (OFF) state of the devices increased with increasing concentration of the GQDs. The ON/OFF ratio of the optimized device was 1 x 10(4), which was the largest memory margin among the devices fabricated in this research. The endurance number of ON/OFF switching was above 1 x 10(2) cycles, and the retention time was relatively constant, maintaining a value above 104 s. The devices showed high reproducibility with the writing voltage being distributed between -0.5 and -1.5 V and the erasing voltage being distributed between 2 and 3 V. The ON state currents remained between 0.02 and 0.03 A, and the OFF state currents stayed between 10(-6) and 10(-4) A. The carrier transport mechanisms are illustrated by using both the results obtained by fitting the I-V curves and the energy band diagrams of the devices. (C) 2017 Elsevier B.V. All rights reserved.

Highly-reproducible Nonvolatile Memristive Devices Based on Polyvinylpyrrolidone: Graphene Quantum-Dot Nanocomposites

Operating Mechanisms of Highly-Reproducible Write-Once-Read-Many-Times Memory Devices Based on Graphene Quantum Dot: Poly(Methyl Silsesquioxane) Nanocomposites

Highly Stable and Flexible Memristive Devices Based on Polyvinylpyrrolidone: WS2 Quantum Dots

Highly-stable Memristive Devices Based on Poly(methylmethacrylate): CsPbCl3 Perovskite Quantum Dot Hybrid Nanocomposites

Transient N-GQDs/PVA nanocomposite thin film for memristor application

Tristable Switching of the Electrical Conductivity Through Graphene Quantum Dots Sandwiched in Multi-Stacked Poly(Methyl Methacrylate) Layers

Solution-Processed, Flexible, and Transparent Non-Volatile Memory with Embedded Graphene Quantum Dots in Polymethylsilsesquioxane Layers

Highly-stable Write-Once-read-many-times Switching Behaviors of 1D–1R Memristive Devices Based on Graphene Quantum Dot Nanocomposites

Memristive Devices with Highly Repeatable Analog States Boosted by Graphene Quantum Dots

Indium-Tin-Oxide, Free, Flexible, Nonvolatile Memory Devices Based on Graphene Quantum Dots Sandwiched Between Polymethylsilsesquioxane Layers

Effect of a PEDOT:PSS Modified Layer on the Electrical Characteristics of Flexible Memristive Devices Based on Graphene Oxide:Polyvinylpyrrolidone Nanocomposites

Electrical Bistabilities and Conduction Mechanisms of Nonvolatile Memories Based on a Polymethylsilsesquioxane Insulating Layer Containing CdSe/ZnS Quantum Dots

Nonvolatile resistance switching memory devices fabricated from the photopolymerized poly( N -vinylcarbazole)-graphene oxide composites

Transmission Mechanism and Logical Operation of Graphene-Doped Poly(vinyl alcohol) Composite-Based Memristor

Resistive Switching Memory Based on Graphene Quantum Dot Composites and its Conductive Mechanism

High-Performance Biomemristor Embedded with Graphene Quantum Dots

Nonvolatile rewritable memory device based on solution-processable graphene/poly(3-hexylthiophene) nanocomposite

Transient and Flexible Polymer Memristors Utilizing Full-Solution Processed Polymer Nanocomposites.

MoS2 Quantum Dot-Optimized Conductive Channels for a Conjugated Polymer-Based Synaptic Memristor.

Solution-processable Poly(n-Vinylcarbazole)-covalently Grafted MoS2 Nanosheets for Nonvolatile Rewritable Memory Devices.

Optoelectronic Nonvolatile Memories Using Graphene/Hexagonal Boron Nitride/Rhenium Disulfide Heterostructure