Abstract:The low-voltage circuit breaker (LVCB) is commonly utilized in the distribution network. An accurate evaluation of its electrical life is related to the safety and reliability of electric energy output. The traditional arc erosion model only considers the effect of current on contact wear while ignoring the impact of operation conditions (supply voltage and power factor) on electrical life. As a result of the arc voltage, the original circuit topology changes, resulting in an early current zero. At 220–660 V AC supply voltages, arc voltage causes the distortion of the breaking current waveform, and the contact erosion amount (CEA) is smaller than that in the ideal case. This work investigates the effect of arc voltage on breaking current, develops an arc erosion model that includes arc voltage, and compares the CEA curves for various supply voltages and power factors. The electrical life of the LVCB is then simulated using the Monte Carlo approach to determine the distribution of electrical life under various operating situations. The results reveal that the LVCB's electrical life diminishes as the supply voltage increases under the same power factor; it first declines and then increases as the power factor grows under the same supply voltage. For the combination of two parameters (220 V, 0.95) and (660 V, 0.65), the electrical life difference of the LVCB can reach 21.4%. The method solves the low accuracy problem of the LVCB life assessment under different operation conditions. It improves the efficiency of overhaul and maintenance on the LVCB in power distribution systems.

Evaluation Method of Contact Erosion for High Voltage SF 6 Circuit Breakers Using Dynamic Contact Resistance Measurement

Method to Improve the Repeatability of Dynamic Contact Resistance Measurement Test Results for High-Voltage Circuit Breakers

Methodology for Circuit Breaker Contact Diagnosis through Dynamic Resistance Measurements and Fuzzy-Logic-Based Analysis

Study of DC Arc Characteristics on Polluted Silicon Rubber Surface

Study of Turn-on Characteristics of SCRs for ESD Protection with TDR-O and TDR-S TLPs

Characterisation of surface morphology of high voltage DC relay contacts under arc erosion

Study on Breaking Action Characteristics of Moulded Case Circuit-Breaker Contact

Research on the Characteristic of the Electrical Contact Resistance of Strap Contacts Used in High Voltage Bushings

A New Measurement Method of Contact Conditions in a Vacuum Circuit Breaker With the Field Emission Current During the Closing Operation

Investigation of vacuum arc ignition characteristics and erosion morphology microstructure characteristics of CuCr55 electrode contact materials

Current Status of Testing and Research on Circuit Breaker Mechanical Performance and Arc Extinction

Experimental and Numerical Studies on Erosion Damage in Damping Holes on the Valve Plate of an Axial Piston Pump

Improvement on dynamic drop test for dynamic hydrophobicity measurement

Analysis of SF6 contact based on QPSO-SVR

Damage of Surface Films Based on Electrical Contact Resistance

Experiment Researches on Cold State Dielectric Recovery Characteristics in High Voltage SF6 Circuit Breakers

Study of microstructural evolution during operation of electrically connected components and analysis of failure mechanism

The Contact Resistance And Arc Erosion Behavior Of Separable Cp-Nb-Cr/Cu-Cd Electrical Contact Material

Early Detection of Health Condition Degradation of Circuit Breaker Based on Electrical Quantity Monitoring

Analysis of Erosion Resistance of CuC Arcing Contacts Manufactured by Plasma Spraying Technology

Electrical Life Assessment of the Low-Voltage Circuit Breaker (LVCB) Considering Arc Voltage