Abstract:This research has demonstrated that SiO 2 impregnation under high vacuum pressure of − 90 kPa can significantly reduce porosity by almost 10%, and improve the mechanical and viscoelastic properties of spruce wood under dry and saturated states. Characterization methods, such as impact test, DMA, SEM, EDS, porosity and SAXS tests were conducted on non-treated and − 90 kPa treated spruce wood samples under dry, saturated and submerged states to analyze the synergistic effect of high vacuum SiO 2 impregnation pressure on wood properties. The results showed that high vacuum impregnation pressure had a significant positive reinforcing effect on wood's properties. It increased the impact resistance of wood under dry and saturated conditions. Additionally, the high vacuum impregnation technique was able to overcome the water-induced softening effect and caused a significant increase in the storage modulus through uniform dispersion of the SiO 2 particles in the wood's vascular structure. Consequently, the impregnation reinforced the wood and ameliorated its capacity to absorb energy. High vacuum impregnation was also able to counteract the plasticizing effect of the water molecules and significantly increased the loss modulus by increasing the internal friction and cohesion of the wood components with the addition of the nanoparticles to the vascular system, which increased the wood's capacity to transform and dissipate energy. Quantitatively and qualitatively, impregnation under a vacuum pressure of − 90 kPa exhibited an effective obstruction of the vascular structure of spruce wood. In all conditions, high vacuum-impregnated samples showed significant enhancements over non-treated samples. This research demonstrated that high vacuum SiO 2 impregnation is an effective wood processing technique. Multiple materials and applications could benefit from this research wherein high strain-rate deformations are expected to occur or when simultaneous elastic behaviour of wood and its damping energy is needed. This study could also pave the way for research on the synergistic effect of SiO 2 impregnation and water absorption on the viscoelastic behaviour of wood.

Pore Analysis Of Thermally Compressed Scots Pine (Pinus Sylvestris L.) By Mercury Intrusion Porosimetry

High-Pressure Treatment of Chinese Fir Wood: Effect on Density, Mechanical Properties, Humidity-Related Moisture Migration, and Dimensional Stability

Effects of different incising pretreatments in improving permeability in two refractory wood species

Effect of High-pressure Densification on Moisture Sorption Properties of Paulownia Wood

Effects of High-Pressure Treatment on Poplar Wood: Density Profile, Mechanical Properties, Strength Potential Index, and Microstructure

The study of physico-mechanical properties of SiO2-impregnated wood under dry and saturated conditions

MOISTURE SORPTION ISOTHERMS AND ISOSTERIC HEATS OF SORPTION OF HIGH-PRESSURE TREATED PAULOWNIA WOOD UNDER DIFFERENT STORAGE CONDITIONS

Response Surface Modeling Equilibrium Moisture Content of High Pressure Treated Paulownia Wood

Pore Structure Damages In Cement-Based Materials By Mercury Intrusion: A Non-Destructive Assessment By X-Ray Computed Tomography

Analyzing moisture self-diffusion coefficient and pore characteristics in Mongolian scots pine using single-sided NMR

Improving gas permeability and characterizing the multi-scale pore size distribution of radiata pine (Pinus radiata D. Don) treated via high-intensity microwave

Effect of natural weathering on water absorption and pore size distribution in thermally modified wood determined by nuclear magnetic resonance

Tracing Mercury Entrapment in Porous Cement Paste after Mercury Intrusion Test by X-ray Computed Tomography and Implications for Pore Structure Characterization

Effect of Compression Combined with Steam Treatment on the Porosity, Chemical Compositon and Cellulose Crystalline Structure of Wood Cell Walls

Reassessment of mercury intrusion porosimetry for characterizing the pore structure of cement-based porous materials by monitoring the mercury entrapments with X-ray computed tomography

Thermal performance and mold discoloration of thermally modified wood containing bio‐based phase change material for heat storage

Comparison of Changes in Micropores and Mesopores in the Wood Cell Walls of Sapwood and Heartwood

Changes in gas permeability and pore structure of wood under heat treating temperature conditions

The effect of temperature and moisture content on drilling resistance measurements in wood (Pinus sylvestris L.)

Relationship between the compressive strength, density and the width of the annual rings in a high-guality part of timber of Scots pine (Pinus sylvestris L.) wood

Comprehensive evaluation and interpretation of mercury intrusion porosimetry data of coals based on fractal theory, Tait equation and matrix compressibility