Abstract:Magnesium (Mg) and its alloys have been widely used in a variety of industrial fields, however, the high corrosion rate and surface contamination restrict their applications. In this study, a corrosion-resistant polymer coating with self-cleaning properties on Mg alloy AZ31 was successfully fabricated via a pretreatment of amino-silane (poly(3-aminopropyl)trimethoxysilane, PAPTMS) and subsequently covered with a polypropylene (PP) film. Surface morphology and chemical compositions were examined using field-emission scanning electron microscopy (FE-SEM), X-ray diffraction (XRD), and Fourier transform infrared spectrophotometry (FT-IR) and X-ray photoelectron spectroscopy (XPS) as well. Contact angle was measured to determine hydrophobicity of the composite coatings. Water permeability of the coatings was evaluated through electrochemical impedance spectroscopy (EIS). Corrosion resistance of the coating was investigated using electrochemical and hydrogen evolution tests. Results indicated that PAPTMS/PP coatings possessed a micrometer-scaled porous spherical microstructure, and super-hydrophobicity with high water contact angle (162 ± 3.4°) and low sliding angle (5 ± 0.6°) due to the low surface energy (10.38 mJ/m2). Moreover, the coating exhibited a smaller water diffusion coefficient (8.12 × 10−10 cm2/s) and water uptake volume fraction (24.5 %), demonstrating low water permeability and good physical barrier performance. As a result, the corrosion current density of PAPTMS/PP coating exhibited approximately three orders of magnitude lower than that of the AZ31 substrate, suggesting excellent corrosion resistance. Finally, corrosion-resistant mechanism of the hybrid coating was proposed.

Corrosion Resistance of Ceria/polymethyltrimethoxysilane Modified Magnesium Hydroxide Coating on AZ31 Magnesium Alloy

Corrosion Resistance of a Ceria/polymethyltrimethoxysilane Modified Mg-Al-layered Double Hydroxide on AZ31 Magnesium Alloy

Corrosion resistance of Mg−Al LDH/Mg(OH)2/silane−Ce hybrid coating on magnesium alloy AZ31

Improved Corrosion Resistance of Al2O3 Ceramic Coatings on AZ31 Magnesium Alloy Fabricated Through Cathode Plasma Electrolytic Deposition Combined with Surface Pore-Sealing Treatment

Corrosion Resistance of Cerium-Doped Zinc Calcium Phosphate Chemical Conversion Coatings on AZ31 Magnesium Alloy

Corrosion Resistance of a Self-Healing Micro-Arc Oxidation/polymethyltrimethoxysilane Composite Coating on Magnesium Alloy AZ31

Active Corrosion Protection by a Smart Coating Based on a MgAl-layered Double Hydroxide on a Cerium-Modified Plasma Electrolytic Oxidation Coating on Mg Alloy AZ31

The Fabrication of a CeO2 Coating Via Cathode Plasma Electrolytic Deposition for the Corrosion Resistance of AZ31 Magnesium Alloy

Corrosion Behavior of a Self-Sealing Coating Containing CeO2 Particles on Pure Mg Produced by Micro-Arc Oxidation

Hydrophobic Surface Contained Ca And/or Ce Myristate Fabricated on AZ31 by One-Step Electrodeposition for Corrosion Protection in NaCl

Cerium and Silane Conversion Coatings on AZ91 Magnesium Alloy

Corrosion resistance of self-cleaning silane/polypropylene composite coatings on magnesium alloy AZ31

Corrosion Resistance And Mechanism Of Cerium Oxide Ceramic Coatings On Magnesium Alloys

Development of Microarc Oxidation/Sputter CeO2 Duplex Ceramic Anti-Corrosion Coating for AZ31B Mg Alloy

Surface evaluation and electrochemical behavior of cerium conversion coating modified with silane on magnesium alloy

Corrosion protection properties of different inhibitors containing PEO/LDHs composite coating on magnesium alloy AZ31

Fabrication and properties of the superhydrophobic ceria‐based composite coating on magnesium alloy

Hybrid epoxy–silane coatings for improved corrosion protection of Mg alloy

Corrosion resistance enhanced by an atomic layer deposited Al2O3 /micro-arc oxidation coating on magnesium alloy AZ31

PREPARATION AND CORROSION ELECTROCHEMISTRY BEHAVIOR OF CERIUM-BASED CHEMICAL CONVERSION COATING ON AZ91 MAGNESIUM ALLOY