Abstract:Carbon-fiber-reinforced polyetheretherketone (CF/PEEK) composites are widely utilized in aerospace, medical devices, and automotive industries, renowned for their superior mechanical properties and high-temperature resistance. Despite these advantages, the thermomechanical coupling behavior of CF/PEEK under dynamic loading conditions is not well understood. This study aims to explore the thermomechanical coupling effects of CF/PEEK at elevated strain rates, employing Hopkinson bar impact tests and scanning electron microscopy (SEM) for detailed characterization. Our findings indicate that an increase in temperature led to significant reductions in the yield strength, peak stress, and specific energy absorption of CF/PEEK, while fracture strain had no significant effect. For instance, at 200 °C, the yield strength, peak stress, and specific energy absorption decreased by 39%, 37%, and 38%, respectively, compared to their values at 20 °C. Furthermore, as the strain rate increased, the yield strength, peak stress, specific energy absorption, and fracture strain all exhibited strain-hardening effects. However, as the strain rate further increased, above 4000 s-1, the enhancing effect of the strain rate on the yield strength and peak stress gradually diminished. The interaction of the temperature and strain rate significantly affected the mechanical performance of CF/PEEK under high-speed impact conditions. While the strain rate generally enhanced these properties, the strain-hardening effect on the yield strength weakened as the temperature increased, and both the temperature and strain rate contributed to the increase in specific energy absorption. Microdamage mechanism analysis revealed that interface debonding and sliding between the fibers and the matrix were more pronounced under static compression than under dynamic compression, thereby diminishing the efficiency of stress transfer. Additionally, higher temperatures caused the PEEK matrix to soften and exhibit increased viscoelastic behavior, which in turn affected the material's toughness and the mechanisms of stress transfer. These insights hold substantial engineering significance, particularly for the optimization of CF/PEEK composite design and applications in extreme environments.

Experimental Investigation and Constitutive Modeling of the Deformation Behavior of Poly-Ether-Ether-Ketone at Elevated Temperatures

A Constitutive Model for Strain Hardening Behavior of Predeformed Amorphous Polymers: Incorporating Dissipative Dynamics of Molecular Orientation

Dynamic Mechanical Response, Energy Absorption Capacity, and Constitutive Modeling of Polypropylene Fiber-Reinforced Foamed Concrete under High Temperature

Characterize the High-temperature Steady-state Rheological Behavior and Arrhenius Activation of PEEK Via Strain Rate Jump Tensile Tests

Mechanical behavior and modification of poly-ether-ether-ketone using a molecular dynamics method

Thermomechanical Behaviors of Polyether Ether Ketone (PEEK) with Stretch-Induced Anisotropy

A Constitutive Model for Polyether Ether Ketone (PEEK) in Various Mechanical States

Thermomechanical Constitutive Behaviour of 3D Printed Biomimetic Polymer Material under High Strain Rates

Plastic Behavior and Constitutive Relations of DH-36 Steel over a Wide Spectrum of Strain Rates and Temperatures under Tension

Study On Constitutive Modeling For Large Deformation Behavior Of Polyethylene Considering Strain Rate Effect

Characterization and Constitutive Model for Temperature and Strain-Rate Dependent Tensile Behavior of Short Carbon Fiber Reinforced PEEK Composites

An Experimental Study on the Thermomechanical Coupling Effects of Carbon-Fiber-Reinforced Polyetheretherketone under Dynamic Impact

Deformation of PC/ABS alloys at elevated temperatures and high strain rates

Temperature- and Strain-Rate-dependent Tensile Failure Behavior of Short-Fiber-reinforced PEEK Composites

A multiscale viscoelastic constitutive model of unidirectional carbon fiber reinforced PEEK over a wide temperature range

Dynamic Mechanical Analysis of Continuous Carbon Fiber‐reinforced Polyetheretherketones under Multi‐consecutive Temperature Scans

Development of dynamic constitutive model of epoxy resin considering temperature and strain rate effects using experimental methods

A Visco-Elastoplastic Constitutive Model for Large Deformation Response of Polycarbonate over a Wide Range of Strain Rates and Temperatures

A Constitutive Model of Continuous Carbon Fiber Reinforced Thermoplastic Polyether Ether Ketone Composites in a Wide Temperature Range

Experimental Investigation of the Deformation Behavior of Abs Resin at Elevated Temperature and High Strain Rate

Tension behavior of partially crystalline Poly-Ether-Ether-Ketone: Experimental investigation and modeling