Abstract:Glassy polymers exhibit a strong thermomechanical coupling when subjected to mechanical loading. A homogeneous strain distribution can be achieved in uniaxial compression conditions. However, a clear temperature increase is observed when the loading rate is relatively high, which further results in a decrease in stress due to thermal softening. In tensile tests, necking instability can easily occur. A temperature change is accompanied by the nucleation and propagation of necked regions. In this work, we apply the effective temperature theory, which can capture the nonequilibrium structure evolution of amorphous polymers, to investigate the thermomechanical behavior of glassy polymers. We demonstrate that a finite element model based on the effective temperature theory can well capture the stress response and the temperature increase of polycarbonate (PC) compressed at different loading rates. We further combine experiments and simulations to investigate the effects of the loading rate and aging treatment on the necking behavior in amorphous glassy polymer poly(ethylene terephthalate)-glycol (PETG) in uniaxial tension loading tests. Through employing digital image correlation and infrared thermometry, the strain distribution and the temperature field can be fully characterized during the formation and propagation of necked regions. The model captures all important features of localization behavior observed in experiments, including the force–displacement relationship, and the strain and temperature distribution with necking propagation. However, it underestimates the maximum strain and temperature when the displacement is large. Both experimental and simulative results indicate that increasing loading rate and aging time can induce an increase of the intrinsic strain softening due to a more active structural state caused by mechanical rejuvenation. This further leads to more pronounced localized behavior and a ductile–brittle transition. Our work proves that the effective temperature model is a powerful theoretical framework to predict the complex thermomechanical response of glassy polymers.

Tension behavior of partially crystalline Poly-Ether-Ether-Ketone: Experimental investigation and modeling

A Constitutive Model for Strain Hardening Behavior of Predeformed Amorphous Polymers: Incorporating Dissipative Dynamics of Molecular Orientation

Mechanical property characterization of partially crystalline Poly-Ether-Ether-Ketone

Mechanical Behaviors of Copolymer Elastomers: Experimental Characterization and Constitutive Modelling

A Finite Deformation Fractional Viscoplastic Model for the Glass Transition Behavior of Amorphous Polymers

Thermomechanical Coupling in Glassy Polymers: an Effective Temperature Theory

An Experimental Study on Strain Hardening of Amorphous Thermosets: Effect of Temperature, Strain Rate, and Network Density

Modeling Temperature-Dependent Behavior of Soft Clay

Development of dynamic constitutive model of epoxy resin considering temperature and strain rate effects using experimental methods

Structure/property relationship of semi-crystalline polymer during tensile deformation: A molecular dynamics approach

A viscoelastoplastic constitutive model of semi-crystalline polymers under dynamic compressive loading: Application to PE and PA66

Thermomechanical Modeling of Microstructure Evolution Caused by Strain-Induced Crystallization

A General Temperature-Dependent Stress–Strain Constitutive Model for Polymer-Bonded Composite Materials

Dynamic Tensile Behavior of Polyamide 6 at Different Strain Rates: Experiments and Constitutive Model

Temperature and strain rate effects on ultra‐high‐molecular‐weight‐polyethylene compression: An experimental and modeling approach

Novel Model for Uniaxial Strain‐rate–dependent Stress–strain Behavior of Ethylene–propylene–diene Monomer Rubber in Compression or Tension

Micromechanical Modeling Of Tensile Response Of Elastic-Brittle Materials

Rate- and temperature-dependent strain hardening in glassy polymers: Micromechanisms and constitutive modeling based on molecular dynamics simulations

Effect of the temperature and strain rate on the tension response of uncured rubber: Experiments and modeling

A constitutive model for poly-methyl-methacrylate over a wide range of strain rates and temperatures

Modeling steady state rate- and temperature-dependent strain hardening behavior of glassy polymers