Abstract:This paper presents a low-power 18/12-bit 1MS/s reconfigurable pipelined-successive approximation register analog-to-digital converter (pipelined-SAR ADC). The proposed pipelined-SAR ADC employs a two-stage SAR structure coupled through a residual amplifier, with the forestage performing 12-bit coarse quantization and the poststage handling 7-bit fine quantization, one bit of redundancy is contained in the rear stage. The input signal is sampled by the first stage, SAR ADC, using the upper plate of a capacitor array and is quantized by charge redistribution. This eliminates the need of additional DACs and subtractors , allowing direct acquisition of the residuals. In addition, the residuals can be amplified by reusing the capacitor array as a switching capacitor. To minimize static power consumption, dynamic logic is adopted in each module of the pipelined-SAR ADC. The calibration of comparator offset and capacitor mismatch is carried out using analog front-end calibration techniques. Implemented in a 180 nm CMOS process, the simulation results show an extra-low power consumption of 1.76 mW with 3.3 V supply voltage and 1MS/s sampling rate, indicating an exceptional Schreier figure of merit (FOMs) at 181.64 dB. By shutting down the modules of the second-stage SAR ADC, the 18-bit ADC can be dynamically configured as a 12-bit ADC with a sampling rate of up to 5MS/s.

On the design of high-speed energy-efficient successive-approximation logic for asynchronous SAR ADCs

A 10-Bit 250-KS/s 1.24-uW SAR ADC for IoT Sensors with Energy-Efficient Comparator.

A 77.2-Db SNDR SAR ADC with a Segmented Comparator Logic Based on Compensatory SA Latch for FIA

A data-dependent energy reduction algorithm for SAR ADC using self-adaptive window

A Design of Low-Power 10-bit 1-MS/s Asynchronous SAR ADC for DSRC Application

Design of a Low-power Single-channel 8-Bit 1.25GSPS SAR ADC

A Fast Low Power Window-Opening Logic for High Speed Sar Adc

A 2GSPS 6-bit two-channel-interleaved successive approximation ADC design in 65nm CMOS

A 0.9-V 12-Bit 100-Ms/s 14.6-Fj/conversion-step SAR ADC in 40-Nm CMOS

A Low-Power 12-Bit 2gs/S Time-Interleaved Pipelined-Sar Adc In 28nm Cmos Process

Low-Power SAR ADC Design: Overview and Survey of State-of-the-Art Techniques

A Two-step SAR ADC with Synchronous DEM Calibration Achieving Up to 15% Power Reduction.

An energy-efficient reconfigurable 18/12-bit 1MS/s pipelined-SAR ADC

A 300ms/s 57.6db SNDR Single-Channel SAR ADC with Accelerated SAR Logic.

A Low Power 10-Bit 100-Ms/s SAR ADC in 65nm CMOS

A Low Voltage and Low Power 10-Bit Non-Binary 2b/cycle Time and Voltage Based SAR ADC

Power efficient SAR ADC with optimized settling technique

A single channel, 6-bit 410-ms/s asynchronous SAR ADC based on 3bits/stage

A 24-µW 11-bit 1-MS/s SAR ADC with a bidirectional single-side switching technique

An 8-MS/s 16-bit SAR ADC With Symmetric Complementary Switching and Split Passive Reference Segmentation in 180-nm Process

A 6bit 550Ms/s small area low power successive approximation ADC