Abstract:This paper presents an energy‐efficient fully differential switching scheme for successive approximation register (SAR) analog‐to‐digital converters (ADCs). During the sampling phase, the top and bottom plates of all capacitors except most significant bit (MSB) capacitors are grounded in digital‐to‐analog converter (DAC) arrays. The input signals are bottom plate sampled on MSB capacitors. This technique can reduce the settling time by more than 87.5% in comparison with the conventional switching scheme. Furthermore, a novel reset‐free regenerative comparator is unveiled in this paper. The proposed comparator is armed to amplify its inputs both during the reset and evaluation phases. Summary This paper presents an energy‐efficient fully differential switching scheme for successive approximation register (SAR) analog‐to‐digital converters (ADCs). During the sampling phase, the top and bottom plates of all capacitors except most significant bit (MSB) capacitors are grounded in digital‐to‐analog converter (DAC) arrays. The input signals are bottom plate sampled on MSB capacitors. This technique can reduce the settling time by more than 87.5% in comparison with the conventional switching scheme. Furthermore, a novel reset‐free regenerative comparator is unveiled in this paper. The proposed comparator is armed to amplify its inputs both during the reset and evaluation phases. In comparison with a conventional single‐ended comparator, the proposed comparator can reduce power consumption above 90% for the almost same input‐referred offset voltage. The proposed scheme is designed with a resolution of 8‐bit and a sampling rate of 90 MS/s in a standard 65‐nm CMOS technology. The simulation results certify that the ADC dissipates 363‐μW power with a 1.2‐V supply voltage and achieves a 7.13 effective number of bits (ENOBs), yielding a 28.8 fJ/conversion step Nyquist rate Walden FOM.

Power efficient SAR ADC with optimized settling technique

A 10-Bit 250-KS/s 1.24-uW SAR ADC for IoT Sensors with Energy-Efficient Comparator.

Design of an 8-Channel 12bits 1MSPS SAR ADC

A 960 Μw 10-Bit 70-Ms/s SAR ADC with an Energy-Efficient Capacitor-Switching Scheme

A 0.6-V 10-Bit 200-Ks/s SAR ADC with Higher Side-Reset-and-Set Switching Scheme and Hybrid CAP-MOS DAC

A Low Power 10-Bit 100-Ms/s SAR ADC in 65nm CMOS

A 12-bit 200KS/s SAR ADC with a mixed switching scheme and integer-based split capacitor array

A 12b 200KS/s SAR ADC with novel capacitor switching procedure and digital background calibration

A 24-µW 11-bit 1-MS/s SAR ADC with a bidirectional single-side switching technique

A Two-step SAR ADC with Synchronous DEM Calibration Achieving Up to 15% Power Reduction.

An energy-efficient reconfigurable 18/12-bit 1MS/s pipelined-SAR ADC

A Design of Low-Power 10-bit 1-MS/s Asynchronous SAR ADC for DSRC Application

A Very High Energy-Efficiency Switching Technique for SAR ADCs.

High performance low power 10 bit 100 MS/s SAR ADC

A low settling time switching scheme for SAR ADCs with reset‐free regenerative comparator

A 12-Bit 100ms/s SAR ADC with Equivalent Split-Capacitor and LSB-Averaging in 14-Nm CMOS FinFET

Energy-efficient Switching Scheme Based on Floating Technique for SAR ADC

A 0.9-V 12-Bit 100-Ms/s 14.6-Fj/conversion-step SAR ADC in 40-Nm CMOS

A 10-Bit 200-Ks/s 1.76-$\Mu$ W SAR ADC with Hybrid CAP-MOS DAC for Energy-Limited Applications

A split-capacitor vcm-based capacitor-switching scheme for low-power SAR ADCs

Design of a Low-power Single-channel 8-Bit 1.25GSPS SAR ADC