Ladder-type Nonacyclic Indacenodithieno[3,2-B]indole for Highly Efficient Organic Field-Effect Transistors and Organic Photovoltaics

Baomin Zhao,Cenqi Yan,Zheng Wang,Hongyan Huang,Yueming Hu,Pei Cheng,Mingdong Yi,Chengting Huang,Xiaowei Zhan,Wei Huang

DOI: https://doi.org/10.1039/c7tc02912h

IF: 6.4

2017-01-01

Journal of Materials Chemistry C

Abstract:An extended nonacyclic IDTI monomer promising for organic electronics is reported.

What problem does this paper attempt to address?

Aceno[2,1,3]Thiadiazoles for Field-Effect Transistors: Synthesis and Crystal Packing

Ting Lei,Yan Zhou,Chu-Yang Cheng,Yue Cao,Yang Peng,Jiang Bian,Jian Pei

DOI: https://doi.org/10.1021/ol200748c

IF: 5.2

2011-01-01

Organic Letters

Abstract:An efficient synthetic approach to a series of aceno[2,1,3]thiadiazole derivatives is described. 2-TIPS and 2-TES molecules exhibited different crystal packings, and 2-TIPS show good device performances with hole mobility up to 0.4 cm(2) V(-1) s(-1) and an average mobility of 0.15 cm(2) V(-1) s(-1) as the active material for organic field-effect transistors. All of the results demonstrate these aceno[2,1,3]thiadiazole derivatives as promising materials for optoelectronic devices.
IDTI based copolymers for p-type organic field-effect transistors

Xu Liu,Zhifeng Deng,Xinnan Wang

DOI: https://doi.org/10.1016/j.tetlet.2024.155052

IF: 2.032

2024-04-08

Tetrahedron Letters

Abstract:Organic semiconductors received more and more attention in the past few years. Development some novel chromophore with the strong electron-deficient to construct donor–acceptor polymers plays a crucial role for the development of the organic semiconductors. A new acceptor indaceno[1,2- b :5,6- b ′]dithiophene)-2,7-diylbis(methan-1-yl-1-ylidene))bis(6-bromo-indolin-2-one) (IDTI, M1), as well as a IIDT-based polymer P1 were designed in this work, and for the first time applied in the OFET. The results shows that the P1 present not only a strong aggregation, but also a suitable highest occupied molecular orbital (HOMO) energy level. As a consequent, the P1 exhibited a p-type behavior with the hole mobility up to 0.29 cm 2 V −1 s −1 . This work demonstrated that the IDTI chromophore is a promising electron-deficient block for the constructing donor–acceptor high performance semiconductor polymers.

chemistry, organic
Fully‐Fused Indacenodithiophene‐Centered Small Molecule n‐Type Semiconductors for High‐Performance Organic Electronics

Tainan Duan,Jia Wang,Wenrui Shi,Yulu Li,Kaihuai Tu,Xingqi Bi,Cheng Zhong,Jie Lv,Ke Yang,Zeyun Xiao,Bin Kan,Yan Zhao

DOI: https://doi.org/10.1002/anie.202407890

2024-07-03

Angewandte Chemie International Edition

Abstract:Developing novel n‐type organic semiconductors is an enduring research endeavour, given their pivotal roles in organic electronics and their relative scarcity compared to p‐type counterparts. In this study, a new strategy was employed to synthesize n‐type organic semiconductors featuring fully‐fused conjugated backbone. By attaching two sets of adjacent amino and formyl groups to the indacenodithiophene‐based central cores and triggering a tandem reaction of Knoevenagel condensation‐intramolecular cyclization, DFA1 and DFA2 were realized. The solution‐processed organic field effect transistors based on DFA1 exhibited unipolar n‐type transport character with a decent electron mobility of ca. 0.10 cm2 V‐1 s‐1 (ca. 0.038 cm2 V‐1 s‐1 for DFA2 based devices). When employing DFA1 as a third component in organic solar cells, a high power conversion efficiency of 19.2% can be achieved in ternary devices fabricated with PM6:L8‐BO:DFA1. This work paves a new pathway in the molecular engineering of n‐type organic semiconductors, propelling relevant research forward.

chemistry, multidisciplinary
Ladder‐Like Difluoroindacenodithiophene‐4,9‐dione Derivative: A New Acceptor System for High‐Mobility N‐type Polymer Semiconductors

Xin Tao,Wenhao Li,Qingbo Wu,Huan Wei,Yongkun Yan,Lingli Zhao,Yuanyuan Hu,Yan Zhao,Huajie Chen,Yunqi Liu

DOI: https://doi.org/10.1002/adfm.202210846

IF: 19

2023-01-01

Advanced Functional Materials

Abstract:Ladder-like aromatic diketones (LADK), which possess a coplanar pi-extended geometry, a high electron deficiency as well as various attractive optoelectronic properties, are demonstrated as the promising candidates in building small-molecule organic electron-transporting materials, yet reports on direct integration of these structural motifs into n-type polymers are rarely accessed. Herein, it is demonstrated that a possibility of realizing unipolar n-type characteristics of such acceptor system by developing two novel donor-acceptor type polymers, in which the newly developed LADK unit, named as 3,8-bis(2-decyltetradecyl)-5,10-difluoro-s-indaceno[1,2-b:5,6-b ']dithiophene-4,9-dione (FIDTO-R), is adopted as the acceptor segments. The resulting polymers present deep-lying unoccupied molecular orbital levels (as low as -3.84 eV), compact pi-pi stacking (d-spacing, approximate to 3.57 angstrom) coupled with uniform nanofiber-like surface morphology. All these factors contribute to excellent unipolar n-type characteristics with high electron mobilities of 0.27 and 1.01 cm(2) V-1 s(-1), together with high inverter gain values of 141 and 80, respectively. The recorded values are among the best in n-type polymer field-effect transistors and associated inverter circuits. These findings unambiguously reveal that the as-prepared FIDTO-R and its analog LADK derivatives are another type of excellent building blocks for the construction of high-mobility n-type polymers.
High-performance Air-Stable Organic Field-Effect Transistors: Isoindigo-Based Conjugated Polymers.

Ting Lei,Yue Cao,Yunlong Fan,Chen-Jiang Liu,Si-Chun Yuan,Jian Pei

DOI: https://doi.org/10.1021/ja111066r

IF: 15

2011-01-01

Journal of the American Chemical Society

Abstract:Two conjugated polymers, IIDDT and IIDT, based on an isoindigo core were developed for organic field-effect transisitors. Investigation of their field-effect performance indicated that IIDDT exhibited air-stable mobility up to 0.79 cm(2) V(-1) s(-1), which is quite high among polymer FET materials. The facile preparation and high mobility of such polymers make isoindigo-based polymers very promising for application as solution-processable organic semiconductors for optoelectronic devices.
Hepta‐thienoacenes with Internal Carbazole: Synthesis, Regioselectivities and Organic Field‐Effect Transistor Applications

Yueming Hu,Hao Wang,Shuli Liu,Jing Zhang,Baomin Zhao,Nina Fu,Mingdong Yi,Wei Huang

DOI: https://doi.org/10.1002/ajoc.201800368

IF: 3.116

2018-01-01

Asian Journal of Organic Chemistry

Abstract:Acenes/heteroacenes, the most widely studied small-molecule organic semiconductors, always possess linear structures. In this work, three stable, soluble and angular pi-extended hepta-thienoacenes with an internal carbazole, that is, thienobenzo-fused carbazole (DTBCz) were synthesized via a four-step tandem method. The tandem synthesis starting from carbazole derivatives led to interesting isomeric effects. The synthetic regioselectivity was discussed in detail. Their physical properties and electron density distributions were studied by UV/Vis absorption, photoluminescence, thermogravimetric analysis (TGA), differential scanning calorimetry (DSC), cyclic voltammetry (CV) measurements, and theoretical calculations. Their potentials as semiconducting materials were evaluated by fabricating the solution-processed organic field-effect transistors (OFETs). The more angular shaped isomer of DTB[32,34]Cz displayed the best performance with hole mobility up to 0.0044 cm(2) V-1 s(-1) in devices with a thickness of ca. 115 nm. Particularly, the performance of DTB[32,34]Cz-based devices showed less dependence on the thickness of their active layer.
High-Performance Electron Acceptor with Thienyl Side Chains for Organic Photovoltaics.

Yuze Lin,Fuwen Zhao,Qiao He,Lijun Huo,Yang Wu,Timothy C. Parker,Wei Ma,Yanming Sun,Chunru Wang,Daoben Zhu,Alan J. Heeger,Seth R. Marder,Xiaowei Zhan

DOI: https://doi.org/10.1021/jacs.6b02004

IF: 15

2016-01-01

Journal of the American Chemical Society

Abstract:We develop an efficient fused-ring electron acceptor (ITIC-Th) based on indacenodithieno [3,2-b]-thiophene core and thienyl side-chains for organic solar cells (OSCs). Relative to its counterpart with phenyl side-chains (ITIC), ITIC-Th shows lower energy levels (ITIC-Th: HOMO = -5.66 eV, LUMO =-3.93 eV; ITIC: HOMO = -5.48 eV, LUMO =-3.83 eV) due to the a-inductive effect of thienyl side-chains, which can match with high-performance narrow-band-gap polymer donors and wide-band-gap polymer donors. ITIC-Th has higher electron mobility (6.1 X 10(-4) cm(2) V-1 s(-1)) than ITIC (2.6 X 10(-4) cm(2) V-1 s(-1)) due to enhanced intermolecular interaction induced by sulfur-sulfur interaction. We fabricate OSCs by blending ITIC-Th acceptor with two different low-band-gap and wide-band-gap polymer donors. In one case, a power conversion efficiency of 9.6% was observed, which rivals some of the highest efficiencies for single junction OSCs based on fullerene acceptors.
Non-fused nonfullerene acceptors based on thieno[2',3':4,5]thieno[3,2-b]indole for efficient organic solar cells

Zeguang Wu,Lifei Yi,Yongdie Meng,Ning Zhang,Manjun Xiao,Yiyi Liu,Xiaomei Zhao,Jiamin Cao

DOI: https://doi.org/10.1016/j.synthmet.2023.117454

IF: 4

2023-11-01

Synthetic Metals

Abstract:Thieno[3,2-b]indole (TI) has attracted more and more attention in organic electronics. Herein, thieno[2',3':4,5]thieno[3,2-b]indole (TTI), as a tetracyclic derivative of TI, was been developed by fused another thiophene unit. Furtherly, two non-fused NFAs TTI-2F and TTI-2Cl based on TTI have been synthesized via simple and easy synthetic routes. TTI-2F and TTI-2Cl both exhibited excellent thermal stability, low optical bandgaps of ∼1.5 eV, nearly planar molecular geometries, and suitable energy levels. As a result, PM6:TTI-2F solar cells afforded a decent PCE of 10.67 %, with an V OC of 0.935 V, a J SC of 19.21 mA/cm2 and a FF of 59.40 %, which was due to the suitable intermolecular interactions, higher HOMO energy level, better exciton dissociation, suppressed trap-assisted recombination, and balanced charge carrier mobilities. As comparison, PM6:TTI-2Cl cell exhibited much lower PCE of 8.34 %. These results demonstrated that NFAs based on TTI are promising for industrialized organic photovoltaic applications due to the simple synthesis and decent photovoltaic performance.

materials science, multidisciplinary,physics, condensed matter,polymer science
Naphthodithiophene-Based Nonfullerene Acceptor for High-Performance Organic Photovoltaics: Effect of Extended Conjugation

Jingshuai Zhu,Zhifan Ke,Qianqian Zhang,Jiayu Wang,Shuixing Dai,Yang Wu,Ye Xu,Yuze Lin,Wei Ma,Wei You,Xiaowei Zhan

DOI: https://doi.org/10.1002/adma.201704713

2018-01-01

Abstract:Naphtho[1,2‐b:5,6‐b′]dithiophene is extended to a fused octacyclic building block, which is end capped by strong electron‐withdrawing 2‐(5,6‐difluoro‐3‐oxo‐2,3‐dihydro‐1H‐inden‐1‐ylidene)malononitrile to yield a fused‐ring electron acceptor (IOIC2) for organic solar cells (OSCs). Relative to naphthalene‐based IHIC2, naphthodithiophene‐based IOIC2 with a larger π‐conjugation and a stronger electron‐donating core shows a higher lowest unoccupied molecular orbital energy level (IOIC2: −3.78 eV vs IHIC2: −3.86 eV), broader absorption with a smaller optical bandgap (IOIC2: 1.55 eV vs IHIC2: 1.66 eV), and a higher electron mobility (IOIC2: 1.0 × 10−3 cm2 V−1 s−1 vs IHIC2: 5.0 × 10−4 cm2 V−1 s−1). Thus, IOIC2‐based OSCs show higher values in open‐circuit voltage, short‐circuit current density, fill factor, and thereby much higher power conversion efficiency (PCE) values than those of the IHIC2‐based counterpart. In particular, as‐cast OSCs based on FTAZ: IOIC2 yield PCEs of up to 11.2%, higher than that of the control devices based on FTAZ: IHIC2 (7.45%). Furthermore, by using 0.2% 1,8‐diiodooctane as the processing additive, a PCE of 12.3% is achieved from the FTAZ:IOIC2‐based devices, higher than that of the FTAZ:IHIC2‐based devices (7.31%). These results indicate that incorporating extended conjugation into the electron‐donating fused‐ring units in nonfullerene acceptors is a promising strategy for designing high‐performance electron acceptors.
Photovoltaic performance of ladder-type indacenodithieno[3,2-b]thiophene-based polymers with alkoxyphenyl side chains

yue zang,yunxiang xu,chuchen chueh,changzhi li,hsiucheng chen,kunghwa wei,junsheng yu,alex k y jen

DOI: https://doi.org/10.1039/c5ra01763g

IF: 4.036

2015-01-01

RSC Advances

Abstract:Two new ladder-type conjugated polymers, PIDTT-DFBT-EH and PIDTT-F-PhanQ-EH, are prepared through the copolymerization of heptacyclic IDTT with F-PhanQ and DFBT electron deficient moieties. The introduction of 4-(2-ethylhexyloxy)-phenyl (EHOPh) side-chains onto the polymer is beneficial for achieving high molecular weight and good solution-processability of materials. The derived polymer solar cells yielded PCEs of 5.48% (PIDTT-DFBT-EH) and 5.14% (PIDTT-F- PhanQ-EH), without engaging post-solvent or solvent additive treatments.
N-Type Semiconducting Polymers Based on an Bithiophene Imide-Bridged Isoindigo for Organic Field-Effect Transistors

Min Liu,Dong Wang,Jianfeng Li,Junwei Wang,Sang Young Jeong,Han Young Woo,Xianyu Deng,Kun Yang,Xugang Guo

DOI: https://doi.org/10.1016/j.dyepig.2024.112176

IF: 5.122

2024-01-01

Dyes and Pigments

Abstract:n-Type polymer semiconductors are essential for enabling high-performance organic electronic devices; however their development still remains a challenge. Herein, we reported a new electron-deficient building block, i.e. bithiophene imide (BTI)-bridged isoindigo (IID), BTIID, through a Knoevenagel condensation reaction between the bisaldehyde BTI and the alkylated indolinones. Three donor-acceptor (D-A) copolymers were then successfully synthesized via standard Stille coupling reaction based on this novel building block, which exhibit highly planar backbones and low-lying lowest unoccupied molecular orbitals (LUMO) energy levels. When integrated into organic field-effect transistors (OFETs), these polymers demonstrated unipolar n-type transport characteristics with a highest electron mobility of 5.79 × 10−4 cm2 V−1 s−1. Our research results indicate that the design of strong electron-withdrawing units via integrating two different electron-acceptor units into one single structure represents a promising strategy for developing n-type polymer semiconductors with low-lying LUMO energy levels.
Improved Charge Transport and Absorption Coefficient in Indacenodithieno[3,2-B]thiophene-based Ladder-Type Polymer Leading to Highly Efficient Polymer Solar Cells.

Yun-Xiang Xu,Chu-Chen Chueh,Hin-Lap Yip,Fei-Zhi Ding,Yong-Xi Li,Chang-Zhi Li,Xiaosong Li,Wen-Chang Chen,Alex K. -Y. Jen

DOI: https://doi.org/10.1002/adma.201203246

IF: 29.4

2012-01-01

Advanced Materials

Abstract:A novel ladder-type donor (IDTT) is developed by substituting the two outward thiophenes of the IDT donor with two thieno[3,2-b]thiophenes. The polymer derived from this donor possesses longer effective conjugation and better planarity, which improves electron delocalization along the polymer backbone and charge mobility. The polymer solar cell device using PIDTT-DFBT shows a high power conversion efficiency of 7.03% with a large open-circuit voltage of 0.95 V without using any additives or post-solvent/thermal annealing processes.
High-performance, stable organic field-effect transistors based on trans-1,2-(dithieno[2,3-b:3',2'-d]thiophene)ethene

Lei Zhang,Lin Tan,Zhaohui Wang,Wenping Hu,Daoben Zhu

DOI: https://doi.org/10.1021/cm900369s

IF: 10.508

2009-01-01

Chemistry of Materials

Abstract:We present here the synthesis, characterization, and transistor performance of three semiconductor materials based on tratzs-1,2-(dithieno[2,3-b:3',2'-d]thiophene)ethene derivatives. Although the incorporation of aromatic, alkyl substituents in both ends of trans-1,2-(dithieno[2,3-b:3',2'-d]thiophene)ethene have a negligible effect on the conjugation length and the energy gap, the subtle chemical modification leads to great variations in film microstructures, electronic properties, and packing arrangements. The appropriate substituents are capable of providing efficient molecular packing arrangements for high carrier mobility. The phenyl-substituted derivative, compound 3, demonstrates a remarkably high thin film FET performance, with mobility up to 2.0 cm(2) V-1 s(-1) and on/off ratio up to 10(8). In addition, the devices show good environmental stability, even after storage in air for 7 months.
A new dithieno[3,2- b :2′,3′- d ]thiophene derivative for high performance single crystal organic field-effect transistors and UV-sensitive phototransistors

Yunpeng Lou,Rui Shi,Li Yu,Ting Jiang,Haoquan Zhang,Lifeng Zhang,Yongxu Hu,Deyang Ji,Yajing Sun,Jie Li,Liqiang Li,Wenping Hu

DOI: https://doi.org/10.1039/d3ra00600j

IF: 4.036

2023-01-01

RSC Advances

Abstract:2,6-DADTT was presented, demonstrating a mobility up to 1.26 cm 2 V −1 s −1 and a photosensitivity ( P ) of 2.49 × 10 6 , a photoresponsivity ( R ) of 6.84 × 10 3 A W −1 , and ultrahigh detectivity ( D *) of 4.70 × 10 16 Jones to UV light.

chemistry, multidisciplinary
Recent Developments in Indacenodithiophene and Indacenodithienothiophene-based Donor-Acceptor Conjugated Polymers: From Design to Device Performance in Organic Electronics

Wissem Khelifi,Christine K. Luscombe

DOI: https://doi.org/10.1016/j.progpolymsci.2024.101804

IF: 31.281

2024-02-25

Progress in Polymer Science

Abstract:Polymeric semiconductors based on donor-acceptor (D-A) conjugated polymers have emerged as a promising class of materials for various applications due to their excellent solution processability, low cost, and intrinsic flexibility. The use of the indacenodithiophene (IDT) unit as a building block has received significant attention due to its unique pentacyclic ring structure and exceptional photophysical and electronic properties. This review focuses on the latest progress in the field of IDT-based polymers. We discuss the versatility of IDT as a structural molecular engineering tool, along with the use of various electron-deficient acceptors as comonomers and modifications to the IDT structure unit. These advancements have led to improved device performance, particularly in organic electronics applications such as photodetectors, solar cells, field-effect transistors, and thermoelectric devices. In summary, this review serves as a valuable reference for researchers who are interested in creating high-performance polymeric semiconductors using the IDT building block for a range of optoelectronic devices.

polymer science
A novel organic n-type material: fluorinated perylene diimide

Hong-Zheng Chen,Min-Min Shi,Tom Aernouts,Mang Wang,Gustaaf Borghs,Paul Heremans

DOI: https://doi.org/10.1016/j.solmat.2004.07.056

IF: 6.9

2005-01-01

Solar Energy Materials and Solar Cells

Abstract:In order to increase the dissociation efficiency of electron–hole pairs (excitons) in organic solar cells, and to enhance the solubility of organic materials for easy fabrication, a novel perylene diimide with multiple strongly electron-withdrawing F atoms, N,N′-diperfluorophenyl-3,4,9,10-perylenetetracarboxylic diimide (DFPP), was designed and synthesized. The solubility of DFPP was improved greatly compared to its non-fluorinated parent, N,N′-diphenyl-3,4,9,10-perylenetetracarboxylic diimide (DPP), which might relate to the spatial arrangement of the phenyl versus the pentafluorophenyl groups. The field-effect-transistor (FET) with spin-coated DFPP film as transport layer was prepared, and its electron mobility was measured as 1.29×10−5cm2V−1s−1, 3.4 times higher than that from vacuum-deposited DPP film, demonstrating its potential applications in organic optoelectronic devices.
A Cyclic Triphenylamine Dimer for Organic Field-Effect Transistors with High Performance

Yabin Song,Chong'an Di,Xiaodi Yang,Shouping Li,Wei Xu,Yunqi Liu,Lianming Yang,Zhigang Shuai,Deqing Zhang,Daoben Zhu

DOI: https://doi.org/10.1021/ja069986o

IF: 15

2007-01-01

Journal of the American Chemical Society

Abstract:A cyclic ethylene linked triphenylamine dimer formed highly crystalline thin film via vapor deposition. Meanwhile, the corresponding linear molecule only resulted in amorphous films under the same condition. The performance as FET semiconductor also improved significantly when the molecular structure derived from linear to cyclic type. The cyclic molecule displayed mobilities in excess of 10-2 cm2 V-1 s-1 and high on/off ratios up to 107.
Synergistic Use of All-Acceptor Strategies for the Preparation of an Organic Semiconductor and the Realization of High Electron Transport Properties in Organic Field-Effect Transistors

Shiwei Ren,Wenqing Zhang,Zhuoer Wang,Abderrahim Yassar,Zhiting Liao,Zhengran Yi

DOI: https://doi.org/10.3390/polym15163392

IF: 5

2023-08-14

Polymers

Abstract:The development of n-type organic semiconductor materials for transporting electrons as part of logic circuits is equally important to the development of p-type materials for transporting holes. Currently, progress in research on n-type materials is relatively backward, and the number of polymers with high electron mobility is limited. As the core component of the organic field-effect transistor (OFET), the rational design and judicious selection of the structure of organic semiconductor materials are crucial to enhance the performance of devices. A novel conjugated copolymer with an all-acceptor structure was synthesized based on an effective chemical structure modification and design strategy. PDPPTT-2Tz was obtained by the Stille coupling of the DPPTT monomer with 2Tz-SnMe3, which features high molecular weight and thermal stability. The low-lying lowest unoccupied molecular orbital (LUMO) energy level of the copolymer was attributed to the introduction of electron-deficient bithiazole. DFT calculations revealed that this material is highly planar. The effect of modulation from a donor–acceptor to acceptor–acceptor structure on the improvement of electron mobility was significant, which showed a maximum value of 1.29 cm2 V−1 s−1 and an average value of 0.81 cm2 V−1 s−1 for electron mobility in BGBC-based OFET devices. Our results demonstrate that DPP-based polymers can be used not only as excellent p-type materials but also as promising n-type materials.

polymer science
Ladder‐type Diindenopyrazine Based Conjugated Copolymers for Organic Solar Cells with High Open‐circuit Voltages

Shanci Chen,Changquan Tang,Zhigang Yin,Yunlong Ma,Dongdong Cai,Dhanavel Ganeshan,Qingdong Zheng

DOI: https://doi.org/10.1002/cjoc.201300500

IF: 5.56

2013-01-01

Chinese Journal of Chemistry

Abstract:A ladder-type diindenopyrazine (IPY) was synthesized and used as a building block for constructing conjugated copolymers. Three copolymers based on the IPY moiety were obtained via the Suzuki coupling reaction with different monomers, including 4,7-dithien-2-yl-2,1,3-benzothiadiazole (DBT), 5,8-dithien-2-yl-2,3-diphenylquinoxaline (DTQ), and 5,8-dithien-2-yl-2,3-di(4-fluorophenyl)quinoxaline (DFTQ). The obtained polymers were characterized by 1H NMR spectroscopy, UV-Vis absorption spectroscopy, cyclic voltammetry, and gel permeation chromatography (GPC). Owing to the four solubilizing alkyl chains on the IPY unit, all the three copolymers have good solubility in common solvents. These polymers have deep-lying HOMO energy levels in the range of −5.55–−5.60 eV, and exhibit ?eld-effect mobilities as high as 0.006 cm2·V−1·s−1. Photovoltaic applications of these polymers as light-harvesting and hole-conducting materials were investigated in conjunction with [6,6]-phenyl-C61-butyric acid methyl ester (PC61BM). Both conventional and inverted devices were fabricated based on these three polymers. A power conversion efficiency (PCE) of 2.53% and a high open-circuit voltage of 1.00 V were obtained under simulated solar light AM 1.5 G (100 mW/cm2) from an inverted solar cell with an active layer containing 25 wt% ladder-type IPY containing copolymer (PIPYDTQ) and 75 wt% PC61BM. Moreover, a high open-circuit voltage of 1.02 V and a PCE of 2.40% were achieved from a conventional solar cell based on PIPYDTQ.
Investigating the Crystalline Nature, Charge Transport Properties and Photovoltaic Performances of Ladder-Type Donor Based Small Molecules

Hua-Chun Wang,Lu-Ming Tang,Lijian Zuo,Hongzheng Chen,Yun-Xiang Xu

DOI: https://doi.org/10.1039/c5ra15896f

IF: 4.036

2015-01-01

RSC Advances

Abstract:The indacenodithieno[3,2-b]thiophene (IDTT) core promoted the crystallinity of ladder-type donor based small molecules and π-bridge structures could improve the photovoltaic performance.

Ladder-type Nonacyclic Indacenodithieno[3,2-B]indole for Highly Efficient Organic Field-Effect Transistors and Organic Photovoltaics

Aceno[2,1,3]Thiadiazoles for Field-Effect Transistors: Synthesis and Crystal Packing

IDTI based copolymers for p-type organic field-effect transistors

Fully‐Fused Indacenodithiophene‐Centered Small Molecule n‐Type Semiconductors for High‐Performance Organic Electronics

Ladder‐Like Difluoroindacenodithiophene‐4,9‐dione Derivative: A New Acceptor System for High‐Mobility N‐type Polymer Semiconductors

High-performance Air-Stable Organic Field-Effect Transistors: Isoindigo-Based Conjugated Polymers.

Hepta‐thienoacenes with Internal Carbazole: Synthesis, Regioselectivities and Organic Field‐Effect Transistor Applications

High-Performance Electron Acceptor with Thienyl Side Chains for Organic Photovoltaics.

Non-fused nonfullerene acceptors based on thieno[2',3':4,5]thieno[3,2-b]indole for efficient organic solar cells

Naphthodithiophene-Based Nonfullerene Acceptor for High-Performance Organic Photovoltaics: Effect of Extended Conjugation

Photovoltaic performance of ladder-type indacenodithieno[3,2-b]thiophene-based polymers with alkoxyphenyl side chains

N-Type Semiconducting Polymers Based on an Bithiophene Imide-Bridged Isoindigo for Organic Field-Effect Transistors

Improved Charge Transport and Absorption Coefficient in Indacenodithieno[3,2-B]thiophene-based Ladder-Type Polymer Leading to Highly Efficient Polymer Solar Cells.

High-performance, stable organic field-effect transistors based on trans-1,2-(dithieno[2,3-b:3',2'-d]thiophene)ethene

A new dithieno[3,2- b :2′,3′- d ]thiophene derivative for high performance single crystal organic field-effect transistors and UV-sensitive phototransistors

Recent Developments in Indacenodithiophene and Indacenodithienothiophene-based Donor-Acceptor Conjugated Polymers: From Design to Device Performance in Organic Electronics

A novel organic n-type material: fluorinated perylene diimide

A Cyclic Triphenylamine Dimer for Organic Field-Effect Transistors with High Performance

Synergistic Use of All-Acceptor Strategies for the Preparation of an Organic Semiconductor and the Realization of High Electron Transport Properties in Organic Field-Effect Transistors

Ladder‐type Diindenopyrazine Based Conjugated Copolymers for Organic Solar Cells with High Open‐circuit Voltages

Investigating the Crystalline Nature, Charge Transport Properties and Photovoltaic Performances of Ladder-Type Donor Based Small Molecules