Abstract:Organic electronics have attracted intensive research interest in the past decades (Chen et al., 2020; Yao et al., 2020; Tang et al., 2021). The ever-increasing demand for organic electronics calls for the development of high-performance and high-stability organic thin-film transistors (OFETs). OFETs are considered key components to fabricate flexible and printable devices for promising applications, such as flexible displays, chemical sensors, wearable devices, and radio frequency identification (RFID) tags. The design and synthesis of novel structural materials (such as semiconductors, dielectrics, electrodes, and substrates), as well as the development of efficient interface engineering strategies, would further promote the development of flexible electronics and lay the foundation for their early commercialization (Ji et al., 2019; Ji et al., 2021). Despite remarkable progress in the development of new materials and relevant applications in organic electronics, some challenges remain, not only on the design and synthesis of novel structural materials (such as π-conjugated small molecule or polymer semiconductors, dielectrics, electrodes, and substrates), but also the development of efficient interface engineering strategies, for the fabrication of high-performance and high-stability devices, and eventually the realization of commercially available products. For example: 1) The need for new π-conjugated semiconductors (small molecule or polymer semiconductors) compatible with polymer dielectric for high-performance devices; 2) The need for polymer dielectric (chemical structures, polarity effects, etc) compatible with commonly used microfabrication technologies for highly integrated miniaturized devices (such as inverter, oscillator, etc); 3) The need for low-voltage and high-currentdensity high-performance devices (new transistor design or high dielectric constant insulators); 4) The strategies for large-scale device fabrication with uniform performance (new fabrication methods); 5) The need for high-stability devices (atmospheric, thermal). This Research Topic aims to address the above-mentioned challenges, including one Editorial, one Review and five Original research. The following themes will provide some clues to promote progress in this area. First of all, a novel photoactive semiconductor (named as IDTOT-4F) with an A-π-D-π-A-type configuration is synthesized for optoelectrical device with photo response and optical memory behaviors provided by W. Huang et al. Then, the development of new efficient interface engineering strategies (electrode approach by W. Li et al.; interface modification by T. Li et al.) for high-performance organic thin-film transistors. In addition, new methods for the construction of high-performance and high-stability organic thin-film transistors and relevant optoelectronic applications, which could be listed in the review article by L. Huang et al. and original research in the paper of W. Wang et al. Finally, X. Ren and co-workers reported a low-temperature solution process to fabricate a high-k metal oxide dielectric for low-power OFET applications. Edited and reviewed by: Liming Dai, Case Western Reserve University, United States

High-performance Air-Stable Organic Field-Effect Transistors: Isoindigo-Based Conjugated Polymers.

Research Progress in Isoindigo-Based Polymer Field-Effect Transistor Materials

Systematic investigation of isoindigo-based polymeric field-effect transistors: Design strategy and impact of polymer symmetry and backbone curvature

Ambipolar Polymer Field-Effect Transistors Based on Fluorinated Isoindigo: High Performance and Improved Ambient Stability.

IDTI based copolymers for p-type organic field-effect transistors

Design, Synthesis, and Structure–Property Relationships of Isoindigo-Based Conjugated Polymers

Recent Advances on π-Conjugated Polymers as Active Elements in High Performance Organic Field-Effect Transistors

Tuning the Charge‐Transport Property of Pyromellitic Diimide‐Based Conjugated Polymers Towards Efficient Field‐Effect Transistors

N-acylated Isoindigo Based Conjugated Polymers for N-Channel and Ambipolar Organic Thin-Film Transistors

N-Type Semiconducting Polymers Based on an Bithiophene Imide-Bridged Isoindigo for Organic Field-Effect Transistors

High-Performance n-type Polymer Field-effect Transistors with Exceptional Stability

Editorial: High-Performance Organic Thin-Film Transistors

Diketopyrrolopyrrole-based small molecules for solution-processed n-channel organic thin film transistors

Chlorination as a useful method to modulate conjugated polymers: Balanced and ambient-stable ambipolar high-performance field-effect transistors and inverters based on chlorinated isoindigo polymers

Investigation of the Performance of Donor–Acceptor Conjugated Polymers in Electrolyte‐Gated Organic Field‐Effect Transistors

Towards Organic Transistors

High-performance, stable organic field-effect transistors based on trans-1,2-(dithieno[2,3-b:3',2'-d]thiophene)ethene

Novel Divinyl-Flanked Diketopyrrolopyrrole Polymer, Based on a Dimerization Strategy for High-Performance Organic Field-Effect Transistors

Achieving Ideal and Environmentally Stable N-Type Charge Transport in Polymer Field-Effect Transistors

Isoquinoline-1,3-dione-derived conjugated polymers for field-effect transistors: Synthesis, properties, and the effect of inner aromatic bridges

Donor-Acceptor-Based Organic Polymer Semiconductor Materials to Achieve High Hole Mobility in Organic Field-Effect Transistors