Abstract:A novel ladder-type dithienonaphthalene (DTN) was designed and synthesized as an electron-rich unit for constructing donor-acceptor copolymers. Different acceptor moieties, including benzo[c][1,2,5]thiadiazole (BT), 5,6-bis(hexyloxy)-4,7-di(thiophen-2-yl)benzo[c][1,2,5]thiadiazole (TBT), and 2,5-bis(2-ethylhexyl)-3,6-di(thiophen-2-yl)pyrrolo[3,4-c]pyrrole-1,4(2H,SH)-dione (TDPP), were used as electron-deficient units for the target copolymers. These copolymers (PDTNBT, PDTNTBT, and PDTNTDPP) were obtained via the Stile coupling reaction and characterized by H-1 NMR spectroscopy, UV-vis absorption spectroscopy, cyclic voltammetry, and gel permeation chromatography (GPC). Owing to the four solubilizing alkyl chains on the DTN unit, all the three copolymers have good solubility in common solvents. Among these polymers, PDTNTBT exhibits the highest space-charge limit current (SCLC) hole mobility of 2.13 x 10(-5) cm(2) V-1 s(-1), which is beneficial for achieving high performance solar cells. Under the simulated AM 1.5G illumination condition (100 mW/cm(2)), solar cells based on PDTNTBT:PC71BM (1:3, w/w) exhibit a power conversion efficiency (PCE) of 4.8% with a current density of 10.3 mA cm(-2), an open-circuit voltage of 0.86 V, and a fill factor of 54%. With the same device fabrication method, PDTNTDPP:PC71BM (1:3, w/w) and PDTNBT:PC71BM (1:3, w/w) based devices exhibit efficiencies of 1.52% and 2.79%, respectively. Furthermore, inverted solar cells based on these copolymer blends are also fabricated. The inverted devices based on PDTNTDPP:PC71BM (1:2, w/w) and PDTNBT:PC71BM (1:2, w/w) exhibit PCEs of 1.60% and 2.89%, respectively, which are similar to their corresponding conventional devices. And the inverted devices based on PDTNTBT:PC71BM (1:2, w/w) show a higher PCE of 5.0%, and more importantly, they are quite stable as demonstrated by the 4.75% PCE after ambient storage for two months.

Improved Charge Transport and Absorption Coefficient in Indacenodithieno[3,2-B]thiophene-based Ladder-Type Polymer Leading to Highly Efficient Polymer Solar Cells.

Photovoltaic performance of ladder-type indacenodithieno[3,2-b]thiophene-based polymers with alkoxyphenyl side chains

Ladder-Type Dithienonaphthalene-Based Donor–Acceptor Copolymers for Organic Solar Cells

Design and synthesis of copolymers of indacenodithiophene and naphtho[1,2- c:5,6- c ]bis(1,2,5-thiadiazole) for polymer solar cells

Controlling Molecular Packing and Orientation Via Constructing a Ladder-Type Electron Acceptor with Asymmetric Substituents for Thick-Film Nonfullerene Solar Cells.

Effects of Including Electron-Withdrawing Atoms on the Physical and Photovoltaic Properties of Indacenodithieno[3,2-B]thiophene-based Donor–acceptor Polymers: Towards an Acceptor Design for Efficient Polymer Solar Cells

Investigating the Crystalline Nature, Charge Transport Properties and Photovoltaic Performances of Ladder-Type Donor Based Small Molecules

Improved synthesis and photovoltaic performance of donor–acceptor copolymers based on dibenzothiophene-cored ladder-type heptacyclic units

Indacenodithiophene and Quinoxaline-Based Conjugated Polymers for Highly Efficient Polymer Solar Cells

Naphthodithieno[3,2-b]thiophene-based Donor-Acceptor Copolymers: Synthesis, Characterization, and Their Photovoltaic and Charge Transport Properties

Synergistic Effects of Selenophene and Extended Ladder-Type Donor Units for Efficient Polymer Solar Cells.

Introducing cyclic alkyl chains into small-molecule acceptors for efficient polymer solar cells

Donor-acceptor conjugated polymer based on naphtho[1,2-c:5,6-c]bis[1,2,5]thiadiazole for high-performance polymer solar cells.

Donor-acceptor-type copolymers based on a naphtho[1,2-c:5,6-c]bis(1,2,5-thiadiazole) scaffold for high-efficiency polymer solar cells.

Improved Thin Film Morphology and Bulk-Heterojunction Solar Cell Performance Through Systematic Tuning of the Surface Energy of Conjugated Polymers

Indacenodithiophene: a promising building block for high performance polymer solar cells

All-polymer solar cells with efficiency approaching 16% enabled using a dithieno[3′,2′:3,4;2′′,3′′:5,6]benzo[1,2- c ][1,2,5]thiadiazole (fDTBT)-based polymer donor

Improved Efficiency of Polymer Solar Cells by Modifying the Side Chain of Wide-Band Gap Conjugated Polymers Containing Pyrrolo[3,4- f]benzotriazole-5,7(6 H)-dione Moiety.

Synthesis of an indacenodithiophene-based fully conjugated ladder polymer and its optical and electronic properties

Non-fullerene Acceptors End-Capped with an Extended Conjugation Group for Efficient Polymer Solar Cells

Applying Thienyl Side Chains and Different Π-Bridge to Aromatic Side-Chain Substituted Indacenodithiophene-Based Small Molecule Donors for High-Performance Organic Solar Cells.