Abstract:Hybrid structure significantly affects the collection mechanism and performance of a hybrid particulate collector. The electrostatic precipitation of particles in the wire-perforated plate structure of a full-scale compact hybrid particulate collector is numerically simulated in this study. The distributions of electric and flow fields and the charging, motion, and precipitation of particles in this specific structure are studied. The results show that the distribution of electric field in the final stage is asymmetrical because of the baffle plate at the end of the channel. The field distributions of other stages are identical to that of wire-plate electrostatic precipitator. The openings increase the electric field strength in the region adjacent to the perforated plate. The electric field passes through the openings, which is then distributed to the back side of the perforated plate. The aerosol cross flow rate along the perforated plate varies periodically under the effect of electric body force. Whereas, the overall cross flow rate of each stage is the same, except the first stage. Two counter-rotating eddies are formed behind the perforated plate between every two openings. Particle charge exceeds 80% of the final charge when the particles move to the position of the first wire. The 10 mu m particles finish their charging processes faster than 1 mu m particles with a final charge of approximately 100 times that of 1 mu m particles. The charge acquired by a particle under the wire-perforated plate structure is 3% higher than that under the wire-plate structure. Particle trajectory result shows three modes of electrostatic precipitation in a compact hybrid particulate collector, namely, collection on the front, flank, and back sides of the perforated plate. Particle transport by eddies on the back of the perforated plate plays an important role in particle deposition on the back side. Variation in the capture probability of particles released from different positions corresponds to the opening structure. High and low probability areas separate with each other. The collection efficiency of 10 mu m particle is higher than that of the 1 mu m particle. The results can explain hybrid mechanism and optimize hybrid structure. (C) 2018 Elsevier B.V. All rights reserved.

Experimental and Numerical Study of Particle Deposition on Perforated Plates in a Hybrid Electrostatic Filter Precipitator

Three-dimensional simulation of electric field and space charge in the advanced hybrid particulate collector

Experimental Research on Particulate Collection Performanceby Perforated Plate in Hybrid Particulate Collector

Mechanism Study of Electrostatic Precipitation in a Compact Hybrid Particulate Collector

Characterization of Electrohydrodynamic Flow in a Plate-Plate Electrostatic Precipitator with a Wire-Cylinder Pre-Charger by Data-Driven Vortex and Residence Time Analysis

Electrode Configurations Inside an Electrostatic Precipitator and Their Impact on Collection Efficiency and Flow Pattern

Numerical Simulation of the Flow and the Collection Mechanism Inside a Scale Hybrid Particulate Collector

Particle Deposition in A Full Scale Hybrid Electrostatic-Filtration Collector

Electrode Geometry Optimization in Wire-Plate Electrostatic Precipitator and Its Impact on Collection Efficiency

A Numerical Model for Predicting Particle Collection Efficiency of Electrostatic Precipitators

Current-Voltage Characteristics of the Hybrid Particulate Collector

Experimental investigation on the performance of hybrid electrostatic-fabric precipitators with different structures

3D numerical simulation of particles collection in a high-temperature wire-cylinder electrostatic precipitator

Numerical Modeling of the Electrohydrodynamics in a Hybrid Particulate Collector

Development and Experimental Investigation of the Narrow-Gap Coated Electrostatic Precipitator with a Shield Pre-Charger for Indoor Air Cleaning

Numerical simulation analysis of the electrostatic precipitator and its W-shaped plate structure for high efficiency PM2.5 capture

Numerical Simulation of Particle Migration in Electrostatic Precipitator with Different Electrode Configurations

Effect of High-Voltage Electrostatic Precipitator Dust Collection Plate Structure on Collection Efficiency

Experiments and Numerical Simulations of the Removal of Fine Particles in the Coupling Field of Electrostatic Precipitators

Design of the electrode structure for the dust removal efficiency optimization of electrostatic precipitator

Numerical study on staggered needle-plate electrode configuration for improved particulate matter collection in electrostatic precipitator