Abstract:Numerical studies were performed in this study to analyze the effect of dimensionless elongated injection holes ( G/d = 0.5, 2.0, 4.0, 8.0) on heat and flow characteristics on rib-roughened surfaces with an array of inclined impingement jets. Experimental and numerical data from existing literature were used to validate the numerical solution procedure's heat transfer and flow characteristics in the semicircular test section. The turbulence equations were solved using the SST k-ω turbulence model by varying the Reynolds number from 5000 to 25,000. The curvature effect and staggered array pattern created an additional stagnation region between adjacent impinging jets on smooth surfaces, leading to a low heat transfer zone. Rectangular cross-sectional V-shaped ribs ( VSR ) were placed in regions where the stagnation point occurs to eliminate this disadvantage. The effect of different normalized rib heights ( H r /d = 0, 0.2, 0.3, 0.4) and rib angles ( α = 30°, 45°, 60°, 90°) on the curved surface was also investigated to increase convective heat transfer performance and achieve more homogenous heat transfer distribution by relatively reducing the effect of thermal stresses. Flow properties, area-averaged and local Nusselt number variations on smooth and ribbed surfaces, and the thermal performance criterion ( TPC ) were investigated in detail. The results indicated an increase in overall heat transfer and a more evenly distributed measurement region compared to the conventional (unextended jet and smooth surface) jet impingement configuration. The most significant heat transfer enhancement from combining the elongated jets with VSR was 47.23% at H r /d = 0.2 by reducing the G/d to 0.5. In addition, the highest TPC was determined as 1.07 on the proposed model with G/d = 2.0 and H r /d = 0.2 at Re = 25,000.

Experimental and Numerical Investigation of Heat Transfer in an Array of Impingement Jets on a Concave Surface

Numerical Study On Flow And Heat Transfer Characteristics Of Jet Impingement

Experimental Investigation of Local and Average Heat Transfer Coefficients under an Inline Impinging Jet Array, Including Jets with Low Impingement Distance and Inclined Angle

Experimental and Numerical Study on Heat Transfer with Impinging Circular Jet on a Convex Hemispherical Surface

On heat transfer and flow characteristics of jets impinging onto a concave surface with varying jet arrangements

Heat Transfer and Flow Characteristics of the Jet Array Impingement

Numerical analysis of jet impingement cooling with elongated nozzle holes on a curved surface roughened with V-shaped ribs

Numerical Study on Heat Transfer Characteristics of Jet Array Impingement

Effect of the Nozzle Geometry on Flow Field and Heat Transfer in Annular Jet Impingement

Numerical study on jet impingement boiling cooling of nose cone

Numerical Study on Array Air Jet Heat Transfer Uniformity

Numerical Study of Flow and Heat Transfer of Impingement Cooling on Model of Turbine Blade Leading Edge

NUMERICAL INVESTIGATION OF HEAT TRANSFER PERFORMANCE OF SYNTHETIC JET IMPINGEMENT ONTO DIMPLED/PROTRUSIONED SURFACE

Numerical Study of Impinging Jets Heat Transfer with Different Nozzle Geometries and Arrangements for a Ground Fast Cooling Simulation Device

An Experimental Investigation Of Impingement Heat Transfer In Narrow Space With Full-Height Pin Fins

Numerical Investigation of Heat Transfer Characteristics of Impinging Synthetic Jets with Different Waveforms

Numerical Study on Stagnation Point Heat Transfer by Jet Impingement in A Confined Narrow Gap

Heat transfer enhancement mechanism of jet impingement on aeroengine curved surface using large eddy simulation

Flow behavior and heat transfer characteristics of liquid film on vertical hot surface by inclined jet impingement

Jet Impingement Heat Transfer Characteristics with Variable Extended Jet Holes under Strong Crossflow Conditions

Experimental and Numerical Investigations of Extended Jet Effects on Multiple-Jet Impingement Heat Transfer Characteristics