Abstract:In this study, the convective heat transfer characteristics of a cylinder with flow confinement under the impingement of a circumferentially arranged turbulent inclined circular air jet array are experimentally studied. This jet configuration can be effectively applied in the cooling/heating of rotating machinery, such as cooling of the steam turbine shaft, cement rotary kiln cooling, and textile drying. The purpose of the study is to elucidate the effect of the jet angle (theta) and the jet Reynolds number (Red) on the heat transfer behaviors of the cylindrical target surface. The jet Reynolds number varies from 20,000 to 35,000, and three different jet angles (theta = 20 degrees ,30 degrees ,45 degrees) are adopted. The local Nusselt number distribution of the region of interest on the cylindrical target surface is experimentally measured by applying the transient thermochromic liquid crystal technique. Numerical studies are conducted to obtain details of flow patterns in the confined space, so as to analyze the convective heat transfer mechanisms. The results show that for small jet angles (theta = 20 degrees ,30 degrees), due to the intense circumferential cross-flow, the overall distribution of the Nusselt number is relatively uniform. As the jet angle increases to 45 degrees, the Nusselt number in the middle of the target surface increases significantly because of the formation of the stagnation region. As the jet angle increases from 30 degrees to 45 degrees, the heat transfer uniformity on the cylindrical surface decreases significantly. The maximum difference of the variation coefficient of the Nusselt number is 26.6 % at Red = 35,000. As the jet Reynolds number increases, the local Nusselt number on the cylindrical target surface increases as a whole. The average Nusselt number with Red = 35, 000 increases by 64.3 %-74.9 % compared with the cases of Red = 20, 000.

Experimental and Numerical Study on Heat Transfer with Impinging Circular Jet on a Convex Hemispherical Surface

Heat Transfer Characteristics with Impinging Circular Jet at Curved Surface

Numerical Study On Flow And Heat Transfer Characteristics Of Jet Impingement

On heat transfer and flow characteristics of jets impinging onto a concave surface with varying jet arrangements

Movement of Impingement Heat Transfer by A Single Circular Jet with A Confined Wall

Experimental Investigation of Local and Average Heat Transfer Coefficients under an Inline Impinging Jet Array, Including Jets with Low Impingement Distance and Inclined Angle

Effect of the Nozzle Geometry on Flow Field and Heat Transfer in Annular Jet Impingement

Experimental Study on Mass/Heat Transfer of Circular Jet Impingement in Cubical Cavities

Analysis Of Heat Transfer And Fluid Flow Of A Slot Jet Impinging On A Confined Concave Surface With Various Curvature And Small Jet To Target Spacing

On heat transfer and flow characteristics of jets impinging onto concave surface with varying bleeding arrangements

Numerical Investigation of Impingement Heat Transfer on A Flat and Square Pin-Fin Roughened Plates

Numerical study on jet impingement boiling cooling of nose cone

Numerical Study on Flow and Heat Transfer Characteristics of 3D Turbulent Impinging Jets

Study on Convective Heat Transfer Characteristics of Inclined Jet Impinging Cylindrical Target Surface in the Confined Space

On heat transfer and flow characteristics of jets impingement on a concave surface with varying pin-fin arrangements

Flow behavior and heat transfer characteristics of liquid film on vertical hot surface by inclined jet impingement

Numerical Study on Stagnation Point Heat Transfer by Jet Impingement in A Confined Narrow Gap

Turbulent Heat Transfer From a Slot Jet Impinging on a Flat Plate

HEAT TRANSFER WITH IMPINGING CIRCULAR FREE-SURFACE WATER JET

An Experimental Investigation Of Impingement Heat Transfer In Narrow Space With Full-Height Pin Fins

NUMERICAL INVESTIGATION OF HEAT TRANSFER PERFORMANCE OF SYNTHETIC JET IMPINGEMENT ONTO DIMPLED/PROTRUSIONED SURFACE