Abstract:A microwave‐assisted method for rapid construction of conductive networks on the surfaces of 3D printed parts is proposed. The as‐prepared TPU/CNT composites can still stably convert pressure into electrical signals with high sensitivity (0.879 kPa‐1) after 200 tensile cycles. The TPU/CNT composite flexible sensors demonstrate the potential applications in monitoring finger bending, discriminating running, and walking. With the rapid development of the internet of things, the simple preparation of sensors has become a challenge. The present work presents the simple preparation of flexible sensors by using the fused deposition modeling (FDM) 3D printing combined with the microwave radiation‐assisted treatment of the thermoplastic polyurethane (TPU) with carbon nanotubes (CNTs) as conductive fillers to create the flexible sensors. The as‐prepared TPU/CNT composites exhibit the 7.27 MPa tensile strength and 401% elongation at break, similar to those of the pure TPU. After 200 tensile cycles, the TPU/CNT composites can still stably convert pressure into electrical signals, which can be used as flexible sensors with high sensitivity (0.879 kPa−1). In addition, shoe insoles and finger cover with sensing performance are fabricated through the FDM 3D printing technology, demonstrating the potential of the sensors to monitor human gait, finger straightening, and bending movements. The as‐proposed method involves the embedding CNTs as conductive fillers on the surface of TPU to form the TPU/CNT composite conductive layers on the surface of TPU, which is beneficial for maintaining the elasticity of the polymer matrix. The challenges in preparing stable, low‐cost, and scalable flexible sensors and highlights of the advantages of 3D printing technology in manufacturing flexible piezoresistive sensors are also deeply discussed.

Selective Laser Sintering 3D Printing: A Way to Construct 3D Electrically Conductive Segregated Network in Polymer Matrix

3D-Printable and Multifunctional Conductive Nanocomposite with Tunable Mechanics Inspired by Sesame Candy

DLP 3D Printing of Electrically Conductive Hybrid Hydrogels Via Polymerization-Induced Phase Separation and Subsequent in Situ Assembly of Polypyrrole

Simultaneous Realization of Conductive Segregation Network Microstructure and Minimal Surface Porous Macrostructure by SLS 3D Printing

A Facile Fabrication of PA12/CNTs Nanocomposites with Enhanced Three-Dimensional Segregated Conductive Networks and Electromagnetic Interference Shielding Property through Selective Laser Sintering

Selective laser sintering 3D-Printed conductive thermoplastic polyether-block-amide elastomer/carbon nanotube composites for strain sensing system and electro-induced shape memory

Selective Laser Sintering of Polydimethylsiloxane Composites

3D-Printing of Segregated Carbon Nanotube/polylactic Acid Composite with Enhanced Electromagnetic Interference Shielding and Mechanical Performance

Preparation of carbon black/graphene nanosheets/PP composites with 3D separated conductive networks based on selective laser sintering

Selective Laser Sintering for Electrically Conductive Poly(dimethylsiloxane) Composites with Self-Healing Lattice Structures

Digital Light Processing 3D Printing of Conductive Complex Structures

3D-Printed Co-continuous Segregated CNT/TPU Composites with Superb Electromagnetic Interference Shielding and Excellent Mechanical Properties

Manufacturing of Conductive Filaments for 3D/4D Printing through In Situ Polymerization of Biobased Thermoplastic Polyurethane/Multiwall Carbon Nanotube Composites

Manufacturing of Bio-Based TPU/CNT Composites Using Solvent-Free In-Situ Polymerization for 3D Printing Filament Applications

Multi-dimensional fillers synergistically enhanced thermal conductivity of TPU composites in selective laser sintering technology

3D Printing Interconnected Segregated Composites to Simultaneously Enhance Thermal Conductivity and Mechanical Properties

Two-step approach based on fused filament fabrication for high performance graphene/ thermoplastic polyurethane composite with segregated structure

Microwave Radiation Assisted Construction of Fused Deposition Modeling 3D Printing Flexible Sensors

3D Printing of Conductive Tissue Engineering Scaffolds Containing Polypyrrole Nanoparticles with Different Morphologies and Concentrations

A highly efficient and heat-resistant electromagnetic interference shielding carbon nanotube/poly(phenylene sulfide) composite via sinter molding

3D Printable Polymeric Composite Material with Enhanced Conductivity Achieved by Affinity Matching