Detection of gas-liquid dispersion in jet bubbling reactor
Zhengliang HUANG,Xiaoyun GUO,Yun SHUAI,Yao YANG,Jingyuan SUN,Binbo JIANG,Jingdai WANG,Yongrong YANG
DOI: https://doi.org/10.11949/0438-1157.20190460
2019-01-01
Abstract:In the jet bubbling reactor, as the liquid jet velocity increases, the gas-liquid dispersion shows three states including the flooding, loading, and complete dispersion. In this work, the liquid velocity near the wall above the gas distributor of the jet bubbling reactor was measured by the Pavlov tube to identify the aforementioned three dispersion states. It was found that the standard deviation of liquid velocity and the average liquid velocity both appeared four stages with the increase of jet velocity, which included the first plateau, the ascending stage, descending stage and second plateau. Wherein, the first plateau corresponded to the flooding state, the ascending and descending stages corresponded to the loading state, and the second plateau corresponded to the complete dispersion state. Therefore, the criterion for the critical jet velocity was proposed. The jet velocity at the intersection of the first plateau and the ascending stage was the flooding velocity ujf, and the jet velocity at the intersection of the descending stage and the second plateau was the complete dispersion velocity ujcd. Compared with the visual observation method, the average relative deviation of ujf obtained by liquid velocity standard deviation analysis was 5.82%, the average relative deviation of ujcd was 18.2%; the average relative deviation of ujf obtained by time-averaged liquid velocity analysis was 5.86%, and the average relative deviation of ujcd was 12.1%. The study also found that the blunt jet velocity increases as the superficial gas velocity increases.