The effect of particle size on aluminum dust dispersion based on numerical simulation

Wenling Guan,Yueshuang Xia,Chengjie Dong,Changxing Ren,Wang Zhang

DOI: https://doi.org/10.1016/j.jlp.2024.105290

IF: 3.916

2024-03-09

Journal of Loss Prevention in the Process Industries

Abstract:This study aimed to investigate the dispersion pattern of aluminum dust with different particle sizes in 20 L vessels by numerical simulations. Using coupled Eulerian and Lagrangian methods, the system of Navier–Stokes equations and DPM momentum balance equations were solved to obtain the dispersion process of aluminum dust with different particle sizes (25, 38, 45, 60, and 75 μm). A standard deviation of particle concentration (S pc ) was proposed to characterize dispersity of dust; the smaller S pc is, the better the dispersity of dust is. On the basis of S pc , after the sample reached uniform distribution, the dust with large particle size could maintain uniform dispersion for a certain time period. By contrast, the dust with small particle size, which was more affected by the central turbulence than large dust particles, had difficulty in maintaining uniform dispersion. In addition, the use of rebound nozzles for dust dispersion led to a large turbulence intensity gradient, which significantly influenced the dust dispersion process, especially on the small particle sizes. A large amount of dust was concentrated in the near-wall region, resulting in the concentration of dust in the center of the chamber being lower than expected.

engineering, chemical