Abstract:It is important to characterize the composition of aerosol particles in air, which causes adverse health effects and millions of deaths each year. Aerosol, or particulate matter (PM), is difficult to characterize because of its wide range of particle sizes; constituents (various organic and inorganic compounds); concentration; morphology; state (liquid or solid); and time-dependent modification. Infrared (IR) spectroscopy is a non-destructive method, which provides useful chemical information about the constituents. Current methods for collecting samples use filters that are made of materials which interferes with the IR spectra and thus lowers detection capabilities. Hence, collection on an IR-transparent substrate is desirable. In order to make a good quantitative measurement of the composition of the aerosol using IR-spectroscopy, a collector design should achieve some objectives. Low size-dependence, low chemical interference, and high collection efficiency are required to collect an aerosol sample that is identical to the aerosol in air. Furthermore, high spatial uniformity in deposition pattern is required to reduce optical artefacts or spectrometer dependence, and high collection mass flux is required to reduce the collection time needed for making a confident claim. Electrostatic precipitation (ESP) is a versatile method of aerosol collection and does not suffer from high pressure drop (which can modify the aerosol chemical composition, for example in filtration), or from bounce-off effects (which preferentially samples the size range and liquids, for example in impaction). ESP devices for particle deposition are present in either a translationally symmetric design (linear system) or a radially symmetric design (radial system). Most ESP designs in the public domain have been designed for different purposes and face limitations for fulfilling objectives stated above. Hence, a new device is necessary to meet performance objectives. Our design is based on an analytical, dimensionless (scalable) mathematical model that embodies the physics of particle migration trajectories due to fluid dynamics and electrostatics that lead to particle capture in a two-stage ESP device. This model allowed us to evaluate the tradeoffs among objectives to arrive at a design optimized across multiple objectives, and across multiple length scales (due to its dimensionless form). We validated this model against numerical simulations using COMSOL Multiphysics software, which is considered to be accurate but can only be run for a limited number of configurations (with respect to geometry and operating parameters) due to its high computational cost. Using the validated analytical model, we investigate the relationship among device geometry, methods of particle introduction, operational parameters, and deposited particle positions (which determines collection efficiency, uniformity, and size dependence), to arrive at a range of designs that meet design criteria. We further report the fabrication of a suitable embodiment using 3D-printing while incorporating ease of operation and handling. Measurement capabilities and limits of the device using different laboratory-generated aerosol are reported.

An experimental method for efficiently evaluating the size-resolved sampling efficiency of liquid-absorption aerosol samplers

Comprehensive performance evaluation of six bioaerosol samplers based on an aerosol wind tunnel

An Elution-Based Method for Estimating Efficiencies of Aerosol Collection Devices Not Affected by Their Pressure Drops

Performance of personal inhalable aerosol samplers in very slowly moving air when facing the aerosol source

Development of polydisperse aerosol generation and measurement procedures for wind tunnel evaluation of size-selective aerosol samplers

Liquid Impinger Biosampler'S Performance for Size-Resolved Viable Bioaerosol Particles

Design and Application of a Novel Atmospheric Particle Sampler

Real-time Measurement of Nano-Agglomerate and Aggregate Mass and Surface Area Concentrations with a Prototype Instrument

A Sampler for Collecting Fine Particles into Liquid Suspensions

Investigation of Cut-Off Sizes and Collection Efficiencies of Portable Microbial Samplers

[Development and Performance Evaluation of a Supermicron Particle Generation System for Aerosol Instrument Calibration].

Assessment on the Collection Efficiency of an Aerosol Sampler in Micro and Nanoparticles Environment

Development of a Fog Droplet Sampler with Multi-Segment Structure and Specific Temperature Control

A Passive Sampler With Improved Performance For Collecting Gaseous And Particulate Phase Polycyclic Aromatic Hydrocarbons In Air

A New Instrument Prototype to Measure the Geometric Surface Area of Nanoparticles with a Time Resolution of 1S

Development of Aerosol Sample Introduction Interface Coupled with ICP-MS for Direct Introduction and Quantitative Online Monitoring of Environmental Aerosol

Analysis of Portable Impactor Performance for Enumeration of Viable Bioaerosols

A novel laminar-flow-based bioaerosol test system to determine biological sampling efficiencies of bioaerosol samplers

A Method to Generate Experimental Aerosol with Similar Particle Size Distribution to Atmospheric Aerosol

Method and apparatus for quantitative measurement of aerosol composition using controlled collection of airborne particles

Development of a Novel Electrostatic-Based Bioaerosol Sampler