Abstract:By using photovoltaic technology, ambient solar light can be directly converted to electricity. The photovoltaic technology has been regarded as one of the most important and promising strategies to resolve the worldwide energy and pollution problems. As one type of photovoltaic technology, polymer solar cells have attracted increasing interest due to their advantages of solution processing capability, low-cost, feasibility to be fabricated on flexible substrates etc. Not until a few years ago, the fullerene derivatives had been dominated the organic photovoltaic field as the most promising acceptor materials for polymer solar cells. However, fullerene-based polymer solar cells have a power conversion efficiency bottleneck due to the relatively fixed energy levels as well as the fixed bandgaps of fullerene derivatives. Therefore, researchers started to develop nonfullerene acceptors which can be used as alternatives to replace the traditional fullerene derivatives. Compared to the fullerene derivatives, nonfullerene acceptors offer several advantages such as stronger light absorption, tunable bandgaps and frontier molecular orbital energy levels. For nonfullerene acceptors, a ladder-type fused ring is usually used as the central core which is an essential building block to tailor the bandgaps and energy levels. Although many fused ring systems have been explored for efficient nonfullerene acceptors, ladder-type angular-shape dithienonaphthalene is seldom reported as the donor unit for nonfullerene acceptors. Furthermore, the impact of thiophene bridge on the optical and photovoltaic properties of the dithienonaphthalene-based nonfullerene acceptors has never been reported. In this context, we report on the design and synthesis of a dithienonaphthalene-based small-molecule acceptor which contains thiophene bridges in between the acceptor terminals and the fused-ring donor core. Compared to the dithienonaphthalene-based small-molecule without the thiophene bridges, the resulting acceptor (DTNIT) exhibits a reduced bandgap of 1.52 eV which makes it more suitable to be blended with the benchmark large bandgap copolymer, poly[(2,6-(4,8-bis(5-(2-ethylhexyl)thiophen-2-yl)-benzo[1,2-b: 4,5-b']clithiophene))-alt-(5,5-(1',3'-di-2-thienyl-5',7'-bis(2-ethylhexyl)benzo[1',2'-c:4',5'-c]dithiophene-4,8-dione)] (PBDB-T). The reduced band-gap of the resulting nonfullerene acceptor can be attributed to its extended pi-conjugation in comparison with the dithienonaphthalene-based acceptor without the thiophene bridges. Inverted polymer solar cells with a device configuration of indium tin oxide/ZnO/PBDB-T:DTNIT/MoO3/Ag were fabricated and characterized. Polymer solar cells based on PBDB-T:DTNIT showed an open circuit voltage of 0.91 V, an enhanced short circuit current of 14.42 mAcm(-2), and a moderate PCE of 7.05% which is comparable to the PCE of 7.12% for the inverted device based on PBDB-T:PC71BM. Our results not only provide a method to synthesize efficient nonfullerene acceptors with reduced bandgaps, but also offer a bandgap modulation strategy for nonfullerene acceptors.

Asymmetric Indenothiophene-Based Non-Fullerene Acceptors for Efficient Polymer Solar Cells

Rhodanine Flanked Indacenodithiophene As Non-Fullerene Acceptor for Efficient Polymer Solar Cells

Asymmetric indenothienothiophene-based unfused core for A-D-A type nonfullerene acceptors

Dithienopicenocarbazole-Based Acceptors For Efficient Organic Solar Cells With Optoelectronic Response Over 1000 Nm And An Extremely Low Energy Loss

Nonfullerene Acceptor with Strong Near-Infrared Absorption for Polymer Solar Cells

Acceptor-donor-acceptor Small Molecules Based on Indacenodithiophene for Efficient Organic Solar Cells.

Push-Pull Type Non-Fullerene Acceptors for Polymer Solar Cells: Effect of the Donor Core.

An Electron Acceptor Based On Indacenodithiophene And 1,1-Dicyanomethylene-3-Indanone For Fullerene-Free Organic Solar Cells

Novel wide bandgap benzodithiophene-based polymer donors with electron-withdrawing indolin-2-one side chains for efficient organic solar cells with high open circuit voltage

Nonfullerene Acceptors Based on Extended Fused Rings Flanked with Benzothiadiazolyl-Methylenemalononitrile for Polymer Solar Cells

Asymmetric 9,9′-Bifluorenylidene-based Small Molecules As the Non-Fullerene Acceptors for Organic Photovoltaic Cells

Bandgap Modulation of Dithienonaphthalene-Based Small-Molecule Acceptors for Nonfullerene Organic Solar Cells

Asymmetric-Indenothiophene-Based Copolymers for Bulk Heterojunction Solar Cells with 9.14% Efficiency

Indenothiophene-Based Asymmetric Small Molecules for Organic Solar Cells

Low-bandgap non-fullerene acceptors based on selenophene π spacer and alkylated indaceno[1,2-b:5,6-b′]dithiophene for organic solar cells

Design and Synthesis of Acceptor-Donor-Acceptor Type Non-Fullerene Acceptors Using Oxindole-Based Bridge for Polymer Solar Cells Applications

Asymmetric Indenothiophene-Based Nonfullerene Acceptors for Binary- and Ternary-Blend Polymer Solar Cells

Dithienonaphthalene-Based Non-fullerene Acceptors with Different Bandgaps for Organic Solar Cells

A New Dibenzoquinoxalineimide-Based Wide-Bandgap Polymer Donor for Polymer Solar Cells

Angular-Shaped Dithienonaphthalene-Based Nonfullerene Acceptor for High-Performance Polymer Solar Cells with Large Open-Circuit Voltages and Minimal Energy Losses

Dinaphtho- s -indacene-based copolymers for inverted organic solar cells with high open-circuit voltages