Abstract:A novel ladder-type dithienonaphthalene (DTN) was designed and synthesized as an electron-rich unit for constructing donor-acceptor copolymers. Different acceptor moieties, including benzo[c][1,2,5]thiadiazole (BT), 5,6-bis(hexyloxy)-4,7-di(thiophen-2-yl)benzo[c][1,2,5]thiadiazole (TBT), and 2,5-bis(2-ethylhexyl)-3,6-di(thiophen-2-yl)pyrrolo[3,4-c]pyrrole-1,4(2H,SH)-dione (TDPP), were used as electron-deficient units for the target copolymers. These copolymers (PDTNBT, PDTNTBT, and PDTNTDPP) were obtained via the Stile coupling reaction and characterized by H-1 NMR spectroscopy, UV-vis absorption spectroscopy, cyclic voltammetry, and gel permeation chromatography (GPC). Owing to the four solubilizing alkyl chains on the DTN unit, all the three copolymers have good solubility in common solvents. Among these polymers, PDTNTBT exhibits the highest space-charge limit current (SCLC) hole mobility of 2.13 x 10(-5) cm(2) V-1 s(-1), which is beneficial for achieving high performance solar cells. Under the simulated AM 1.5G illumination condition (100 mW/cm(2)), solar cells based on PDTNTBT:PC71BM (1:3, w/w) exhibit a power conversion efficiency (PCE) of 4.8% with a current density of 10.3 mA cm(-2), an open-circuit voltage of 0.86 V, and a fill factor of 54%. With the same device fabrication method, PDTNTDPP:PC71BM (1:3, w/w) and PDTNBT:PC71BM (1:3, w/w) based devices exhibit efficiencies of 1.52% and 2.79%, respectively. Furthermore, inverted solar cells based on these copolymer blends are also fabricated. The inverted devices based on PDTNTDPP:PC71BM (1:2, w/w) and PDTNBT:PC71BM (1:2, w/w) exhibit PCEs of 1.60% and 2.89%, respectively, which are similar to their corresponding conventional devices. And the inverted devices based on PDTNTBT:PC71BM (1:2, w/w) show a higher PCE of 5.0%, and more importantly, they are quite stable as demonstrated by the 4.75% PCE after ambient storage for two months.

Dinaphtho- s -indacene-based copolymers for inverted organic solar cells with high open-circuit voltages

Hybrid Nonfused Electron Acceptors with Perylene Diimide Pendants for Organic Solar Cells

Ladder-Type Dithienonaphthalene-Based Donor–Acceptor Copolymers for Organic Solar Cells

Acceptor–acceptor conjugated copolymers based on perylenediimide and benzothiadiazole for all‐polymer solar cells

Ladder‐type Diindenopyrazine Based Conjugated Copolymers for Organic Solar Cells with High Open‐circuit Voltages

Asymmetric Indenothiophene-Based Non-Fullerene Acceptors for Efficient Polymer Solar Cells

[6,6]-Phenyl-c61-butyric Acid 2-((2-(dimethylamino)ethyl)(methyl)amino)-ethyl Ester As an Acceptor and Cathode Interfacial Material in Polymer Solar Cells

Novel wide bandgap benzodithiophene-based polymer donors with electron-withdrawing indolin-2-one side chains for efficient organic solar cells with high open circuit voltage

Theoretical investigations on donor-acceptor conjugated copolymers based on naphtho[1,2-c:5,6-c]bis[1,2,5]thiadiazole for organic solar cell applications

Novel polymer acceptors achieving 10.18% efficiency for all-polymer solar cells

Donor–acceptor Copolymers Based on Phenanthrene As Electron‐donating Unit: Synthesis and Photovoltaic Performances

Polymer acceptor based on naphthalene diimide and diethynylbenzo[1,2-b:4,5-b'] dithiophene units for efficient all-polymer solar cells

Novel isoindigo-based conjugated polymers for solar cells and field effect transistors

Indenothiophene‐Based Wide Bandgap Copolymer for Polymer Fullerene Solar Cells with 9.01% Efficiency and 1.0 V Open Circuit Voltage

Enhanced open-circuit voltage of two side chain conjugated polythiophene derivatives blended with indene-C60 bisadduct

Asymmetric-Indenothiophene-Based Copolymers for Bulk Heterojunction Solar Cells with 9.14% Efficiency

Wide-bandgap Donor Polymers Based on a Dicyanodivinyl Indacenodithiophene Unit for Non-Fullerene Polymer Solar Cells

Synthesis and photovoltaic properties of D-A copolymers of benzodithiophene and naphtho[2,3-c]thiophene-4,9-dione

Synthesis And Photovoltaic Properties From Inverted Geometry Cells And Roll-To-Roll Coated Large Area Cells From Dithienopyrrole-Based Donor-Acceptor Polymers

Benzo[1,2‐b:4,5‐b′]difuran Based Polymer Donor for High‐Efficiency (>16%) and Stable Organic Solar Cells

Tuning The Frontier Molecular Orbital Energy Levels Of N-Type Conjugated Copolymers By Using Angular-Shaped Naphthalene Tetracarboxylic Diimides, And Their Use In All-Polymer Solar Cells With High Open-Circuit Voltages