Flower-shaped TiO2clusters for Highly Efficient Photocatalysis

Xiao-Hui Ning,Qing-Ling Meng,Yong-Lu Han,Dong-Yang Zhou,Liang Cao,Zhan-Kun Weng,Ran Ding,Zuo-Bin Wang

DOI: https://doi.org/10.1039/c7ra05949c

2019-01-01

Abstract:TiO2clusters can be synthesized by a simple two-step process combining laser interference ablation with a hydrothermal reaction.

What problem does this paper attempt to address?

Flower-shaped TiO2clusters for highly efficient photocatalysis

Xiao-Hui Ning,Qing-Ling Meng,Yong-Lu Han,Dong-Yang Zhou,Li Li,Liang Cao,Zhan-Kun Weng,Ran Ding,Zuo-Bin Wang

DOI: https://doi.org/10.1039/c7ra05949c

IF: 4.036

2017-01-01

RSC Advances

Abstract:TiO2clusters can be synthesized by a simple two-step process combining laser interference ablation with a hydrothermal reaction.
Self-assembly and Photocatalysis of Mesoporous TiO 2 Nanocrystal Clusters

Qiao Zhang,Ji-Bong Joo,Zhenda Lu,Michael Dahl,Diana Q. L. Oliveira,Miaomiao Ye,Yadong Yin

DOI: https://doi.org/10.1007/s12274-010-0058-9

IF: 9.9

2011-01-01

Nano Research

Abstract:Mesoporous nanocrystal clusters of anatase TiO2 with large surface area and enhanced photocatalytic activity have been successfully synthesized. The synthesis involves the self-assembly of hydrophobic TiO2 nanocrystals into submicron clusters, coating of these clusters with a silica layer, thermal treatment to remove organic ligands and improve the crystallinity of the clusters, and finally removing silica to expose the mesoporous catalysts. With the help of the silica coating, the clusters not only maintain their small grain size but also keep their mesoporous structure after calcination at high temperatures (with BET surface area as high as 277 m2/g). The etching of SiO2 also results in the clusters having high dispersity in water. We have been able to identify the optimal calcination temperature to produce TiO2 nanocrystal clusters that possess both high crystallinity and large surface area, and therefore show excellent catalytic efficiency in the decomposition of organic molecules under illumination by UV light. Convenient doping with nitrogen converts these nanocrystal clusters into active photocatalysts in both visible light and natural sunlight. The strategy of forming well-defined mesoporous clusters using nanocrystals promises a versatile and useful method for designing photocatalysts with enhanced activity and stability.
Hydrothermal synthesis and photocatalytic activity of combination of flowerlike TiO2 and activated carbon fibers

Yong Wang,Guihua Chen,Qianhong Shen,Fumin Zhang,Gangling Chen

DOI: https://doi.org/10.1016/j.matlet.2013.10.097

IF: 3

2014-01-01

Materials Letters

Abstract:The three-dimensional flowerlike TiO2 microstructure was successfully deposited on the surface of activated carbon fibers (ACFs) pre-coated with TiO2 seed layer via a hydrothermal process. The flowerlike structure was constructed by rutile-phased TiO2 rods and the formation mechanism of anchoring TiO2 onto ACF to form the TiO2/ACF composite was also discussed. The TiO2/ACF exhibited a relatively higher photocatalytic activity than the nanometer rutile TiO2 in the degradation of methyl orange, presumably due to a red shift, restraint of the photogenerated hole and electron recombination and high light-harvesting efficiency. In addition, the TiO2/ACF is favorable to reuse by emptying off the supernatant solution.
A facile synthesis of hierarchical TiO2for dye adsorption and photocatalysis

Lu-Lu Lai,Jin-Ming Wu

DOI: https://doi.org/10.1039/c4ra04790g

2014-01-01

RSC Adv.

Abstract:Hierarchical flower-like H2Ti5O11·3H2O assembled with radial nanowires was fabricated through a template-free solution-based method, which could be converted to TiO2with controllable morphologies and phases by a subsequent acid-treating or annealing process.
A facile synthesis of hierarchical flower-like TiO2 with enhanced photocatalytic activity

Jian Zhu,Shao-Hua Wang,Zhen-Feng Bian,Chen-Ling Cai,He-Xing Li

DOI: https://doi.org/10.1007/s11164-009-0096-7

IF: 3.134

2009-01-01

Research on Chemical Intermediates

Abstract:The hierarchical flower-like TiO2 has been achieved by using a simple solvothermal process without any surfactants or colloidal crystals as a template. The structures of the products were characterized by powder X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and nitrogen adsorption-desorption analysis. The relationship between hierarchical structure and photocatalytic performance has been presented based on detailed characterizations. It was found that the hierarchical flower-like structure was a benefit for light absorption and significantly enhanced the photocatalytic activity.
A facile synthesis of hierarchical flower-like TiO 2 with enhanced photocatalytic activity

Jian Zhu,Shao-Hua Wang,Zhen-Feng Bian,Chen-Ling Cai,He-Xing Li

DOI: https://doi.org/10.1007/s11164-009-0096-7

IF: 3.134

2009-01-01

Research on Chemical Intermediates

Abstract:The hierarchical flower-like TiO 2 has been achieved by using a simple solvothermal process without any surfactants or colloidal crystals as a template. The structures of the products were characterized by powder X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and nitrogen adsorption–desorption analysis. The relationship between hierarchical structure and photocatalytic performance has been presented based on detailed characterizations. It was found that the hierarchical flower-like structure was a benefit for light absorption and significantly enhanced the photocatalytic activity.
A facile synthesis of hierarchical TiO2 for dye adsorption and photocatalysis

lulu lai,jinming wu

DOI: https://doi.org/10.1039/c4ra04790g

IF: 4.036

2014-01-01

RSC Advances

Abstract:Hierarchical flower-like H2Ti5O11 center dot 3H(2)O assembled with radial nanowires was fabricated via a template-free solution-based reaction, and was converted to TiO2 with distinct phases and morphologies by the subsequent acid-treating or annealing. The HCl treatment achieved the controllable conversion from titanate nanowires to rutile nanorods by varying the temperature and acidity. When compared with the as-synthesized titanate nanowires and the thoroughly transformed rutile nanorods, their mixtures were found to exhibit the best dye adsorption ability towards rhodamine B and methylene blue in water. The H2Ti5O11 center dot 3H(2)O nanowires decomposed in sequence to anatase and rutile after a subsequent calcination in air, via an intermediate phase of H2Ti4O9 center dot H2O. The hierarchical structure could be retained up to 800 degrees C. When utilized as photocatalysts to degrade rhodamine B in water, the 550 degrees C-calcinated powder, with mixed phases of anatase, rutile, and srilankite, demonstrated the highest photocatalytic activity.
Au Cluster Anchored on TiO 2 /ti 3 C 2 Hybrid Composites for Efficient Photocatalytic CO 2 Reduction

Li, Yang,Yang, Ya-Li,Chen, Gui,Fan, Jia-Jie,Xiang, Quan-Jun

DOI: https://doi.org/10.1007/s12598-022-02007-z

2022-01-01

Abstract:The size of metal nanoparticles is a key factor to enhance the photocatalytic activity of photocatalysts.However,the mechanism of this factor to the improvement of photocatalytic CO2 reduction performance is still unclear.Here,Au cluster/TiO2/Ti3C2 and Au nanoparticle/TiO2/Ti3C2 were successfully prepared by deposition-precipitation method.The experimental results show that the photocatalytic CO2 reduction performance of Au cluster/TiO2/Ti3C2 with quantum size effect is stronger than that of Au nanoparticle/TiO2/Ti3C2 with surface plasmon resonance.The enhanced photocatalytic CO2 reduction activity is assigned to the establishment of an overlapping orbital between the lowest unoccupied molecular orbital(LUMO)of the Au cluster and the anti-bonding orbital of CO2,which greatly promotes the acti-vation efficiency of CO2.The existence of Au cluster and the mechanism of photocatalytic CO2 reduction perfor-mance were certified by high-angle annular dark-field scanning transmission electron microscopy(HAADF-STEM)and in situ Fourier transform infrared spectroscopy(ISFTIR).This work may open new opportunities for the establishment of stable and active metal nanocatalysts.
Synthesis of nickel-doped titanium-oxo clusters with enhanced visible-light photocatalytic activity

Na Li,Meng-Yao Pan,Zi-Juan Yang,Ming-Yu Zhang,Guo-Dong Zou,Yang Fan

DOI: https://doi.org/10.1007/s11243-022-00504-9

2022-07-05

Transition Metal Chemistry

Abstract:Two new Ni-doped titanium-oxo clusters of the formula [Ni 2 Ti 4 ( μ 3 -O) 2 ( μ 2 -O) 2 (BA) 12 (CH 3 CN)(H 2 O)]∙CH 3 CN ( Ti 4 Ni 2 BA 12 ; BA = benzoate) and [Ni 2 Ti 4 ( μ 3 -O) 2 ( μ 2 -O) 2 (O 2 C t Bu) 6 (MA) 4 (OQ) 2 ] ( Ti 4 Ni 2 OQ 2 ; MA = methylacrylate, HOQ = 8-hydroxyquinoline) were synthesized. Single-crystal X-ray diffraction analyses show that the two clusters have similar Ti 4 Ni 2 cluster core consisting of a {Ti 4 ( μ 3 -O) 2 ( μ 2 -O) 2 } ring connected with two Ni atoms. The clusters were functionalized with benzoate and 8-quinolinolate ligands, respectively. Compared to benzoate ligand, the coordination of 8-quinolinolate to the cluster core in Ti 4 Ni 2 OQ 2 leads to enhanced visible-light absorption due to the ligand-to-metal charge transfer transition. In the photocatalytic tests, Ti 4 Ni 2 OQ 2 exhibits remarkably promoted catalytic performance for visible-light-driven photocatalytic oxidative desulfurization of dibenzothiophene.

chemistry, inorganic & nuclear
The Controlled Synthesis of Flower-Like TiO2 Nanosheets with Enhanced Photocatalytic Performance

Qing Li,Xinyang Xu,Juanrong Chen,Zhengliang Yin,Ying Zhang,Feng Ma,Shunsheng Cao

DOI: https://doi.org/10.1007/s10876-024-02599-9

2024-04-08

Journal of Cluster Science

Abstract:Exploring inorganic flower-like nanosheets is of increasing interest not only for fundamental research, but also for development of devices due to their good chemical stability, versatility, and high surface-to-volume ratio. In this work, flower-like TiO 2 nanosheets (FTN) are successfully synthesized by a facile hydrothermal method. Notably, a series of single-factor experiments are carried out to drive multiple functional components in order to integrate into a single flower-like nanostructure perfectly. In addition, these experimental results further reveal that alcohol/glycerol molar ratio acts in a vital role for preparing optimal flower-like morphology and structure of TiO 2 . Furthermore, the photodegradation pathways and mechanism of Levofloxacin (LVOF) by FTN are shown according to photodegradation intermediates of LVOF, trapping experiments, and ligand-to-metal charge transfer (LMCT) sensitizing effect. Therefore, the present work not only demonstrates the controlled synthesis of flower-like TiO 2 nanosheets, but also provides a guide for constructing other inorganic flower-like nanosheets or TiO 2 -based photocatalysts with optimal morphology, structure and photocatalytic performance.

chemistry, inorganic & nuclear
Hierarchical TiO2 Nanoflakes and Nanoparticles Hybrid Structure for Improved Photocatalytic Activity

Yuxin Tang,Peixin Wee,Yuekun Lai,Xiaoping Wang,Dangguo Gong,Pushkar D. Kanhere,Teik-Thye Lim,Zhili Dong,Zhong Chen

DOI: https://doi.org/10.1021/jp210479a

2012-01-01

The Journal of Physical Chemistry C

Abstract:Three-dimensional TiO2 microspheres with different hierarchical nanostructures were synthesized by the synergistic strategies of ultrafast electrochemical spark discharge spallation process followed by thermal treatment. The morphology, crystal structure, surface area, and photocatalytic activity of the hierarchical nanostructures were characterized by scanning electron microscopy, transmission electron microscopy, X-ray diffraction, surface area analysis, and UV-vis spectroscopy respectively. The nanostructure of hierarchical microspheres undergoes three evolution steps, which includes the change from nanosheets into hybrid nanoflakes/nanoparticles and finally to nanoparticles as calcination temperature increases, in line with the predicable trend of increase in crystallinity and decrease in specific surface area. Compared to other forms of calcined TiO2 samples (nanosheets and na.noparticles), the hybrid TiO2 nanoflake/nanoparticle hierarchical porous structure exhibits a higher photocatalytic activity for the degradation of organic compounds (methyl orange and bisphenol A). This is attributed to their larger specific surface area (similar to 116 m(2)/g), more abundant porosity, and good crystallinity. On the basis of this hybrid structure, a visible light sensitive Ag/TiO2 microsphere photocatalyst is designed which shows faster degradation rate under the visible light illumination (>420 nm). The porous microspheric photocatalyst does not lose its activities after recycled use, showing great potential for practical application in environmental cleanup.
Au cluster anchored on TiO2/Ti3C2 hybrid composites for efficient photocatalytic CO2 reduction

Yang Li,Ya-Li Yang,Gui Chen,Jia-Jie Fan,Quan-Jun Xiang

DOI: https://doi.org/10.1007/s12598-022-02007-z

IF: 6.318

2022-06-03

Rare Metals

Abstract:The size of metal nanoparticles is a key factor to enhance the photocatalytic activity of photocatalysts. However, the mechanism of this factor to the improvement of photocatalytic CO 2 reduction performance is still unclear. Here, Au cluster/TiO 2 /Ti 3 C 2 and Au nanoparticle/TiO 2 /Ti 3 C 2 were successfully prepared by deposition–precipitation method. The experimental results show that the photocatalytic CO 2 reduction performance of Au cluster/TiO 2 /Ti 3 C 2 with quantum size effect is stronger than that of Au nanoparticle/TiO 2 /Ti 3 C 2 with surface plasmon resonance. The enhanced photocatalytic CO 2 reduction activity is assigned to the establishment of an overlapping orbital between the lowest unoccupied molecular orbital (LUMO) of the Au cluster and the anti-bonding orbital of CO 2 , which greatly promotes the activation efficiency of CO 2 . The existence of Au cluster and the mechanism of photocatalytic CO 2 reduction performance were certified by high-angle annular dark-field scanning transmission electron microscopy (HAADF–STEM) and in situ Fourier transform infrared spectroscopy (ISFTIR). This work may open new opportunities for the establishment of stable and active metal nanocatalysts.

materials science, multidisciplinary,metallurgy & metallurgical engineering
Hollow TiO2 Nanocages with Rubik-Like Structure for High-Performance Photocatalysts

Guohua Jiang,Xiaohong Wang,Yang Zhou,Rijing Wang,Ruanbing Hu,Xiaoguang Xi,Wenxing Chen

DOI: https://doi.org/10.1016/j.matlet.2012.08.092

IF: 3

2012-01-01

Materials Letters

Abstract:Hollow TiO2 nanocages with rubik-like structure were synthesized via a combined hydrolysis/hydrothermal method. Firstly, highly uniform Cu2O nanocubes covered by TiO2 layer were prepared by hydrothermal hydrolysis of (NH4)2TiF6 following by reducing copper-citrate complex with ascorbic acid. The Cu2O core templates could be easily removed in dilute HCl solution to form a hollow rubik-like structure. The obtained TiO2 nanocages show promising efficiency in the photocatalytic degradation of phenol pollutions.
[Ti8zr2o12(coo)16] Cluster: an Ideal Inorganic Building Unit for Photoactive Metal–Organic Frameworks

Shuai Yuan,Jun-Sheng Qin,Hai-Qun Xu,Jie Su,Daniel Rossi,Yuanping Chen,Liangliang Zhang,Christina Lollar,Qi Wang,Hai-Long Jiang,Dong Hee Son,Hongyi Xu,Zhehao Huang,Xiaodong Zou,Hong-Cai Zhou

DOI: https://doi.org/10.1021/acscentsci.7b00497

IF: 18.2

2017-01-01

ACS Central Science

Abstract:Metal-organic frameworks (MOFs) based on Ti-oxo clusters (Ti-MOFs) represent a naturally self-assembled superlattice of TiO2 nanoparticles separated by designable organic linkers as antenna chromophores, epitomizing a promising platform for solar energy conversion. However, despite the vast, diverse, and well-developed Ti-cluster chemistry, only a scarce number of Ti-MOFs have been documented. The synthetic conditions of most Ti-based clusters are incompatible with those required for MOF crystallization, which has severely limited the development of Ti-MOFs. This challenge has been met herein by the discovery of the [Ti8Zr2O12(COO)16] cluster as a nearly ideal building unit for photoactive MOFs. A family of isoreticular photoactive MOFs were assembled, and their orbital alignments were fine-tuned by rational functionalization of organic linkers under computational guidance. These MOFs demonstrate high porosity, excellent chemical stability, tunable photoresponse, and good activity toward photocatalytic hydrogen evolution reactions. The discovery of the [Ti8Zr2O12(COO)16] cluster and the facile construction of photoactive MOFs from this cluster shall pave the way for the development of future Ti-MOF-based photocatalysts.
Large-scale Floated Single-Crystalline TiO2 Flower-Like Films: Synthesis Details and Applications

Hua-Rong Xia,Chen Peng,Jia Li,Wen-Tao Sun,Guo Ai,Lian-Mao Peng

DOI: https://doi.org/10.1039/c3ra42974a

IF: 4.036

2013-01-01

RSC Advances

Abstract:Large-scale floated single- crystal flower-like films were synthesized without any surfactants in a one-step hydrothermal reaction. Enhanced light-harvesting performance was obtained compared to vertical nanorod arrays, and significant improvements of photoelectric conversion efficiency have been achieved in the dye-sensitized solar cells using the films as photoanodes or scattering layers.
A 20-core copper( i ) nanocluster as electron–hole recombination inhibitor on TiO 2 nanosheets for enhancing photocatalytic H 2 evolution

Yun-Dong Cao,Hui-Ping Hao,Hua-Shi Liu,Di Yin,Ming-Liang Wang,Guang-Gang Gao,Lin-Lin Fan,Hong Liu

DOI: https://doi.org/10.1039/d1nr04683g

IF: 6.7

2021-01-01

Nanoscale

Abstract:An atomic-precise 20-core copper( i )-alkynyl nanocluster has been synthesized. The cluster can be uniformly modified on the surface of TiO2-NS to form the Z-scheme heterostructures, thus promoting the photocatalytic HER performance.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology,chemistry
Novel three-dimensional dandelion-like TiO2 structure with high photocatalytic activity

Xuelian Bai,Bin Xie,Nan Pan,Xiaoping Wang,Haiqian Wang

DOI: https://doi.org/10.1016/j.jssc.2007.12.019

IF: 3.3

2008-01-01

Journal of Solid State Chemistry

Abstract:Pure rutile phase crystalline TiO2 powder with novel 3D dandelion-like structure was synthesized by using a facile hydrothermal method with TiCl3 as the main starting material. In such a 3D structure, the nanometer-scale construction elements aggregate together and form a micrometer-scale artificial unit. The typical 3D dandelion structure has an average diameter of 1.5–2μm and is packed radially by nanorods with [001] preference growth direction. Each individual nanorod is hundreds of nanometers in length, and tens of nanometers in diameter. The obtained 3D dandelion-like TiO2 powder has a high photocatalytic activity, which is equivalent to that of the commercial available P25 titania powder. Mechanisms of the formation of the dandelion-like structure were also discussed. A different oxidation process of Ti(III) to Ti(IV) during hydrothermal was suggested.
Boosting Visible-Light-Driven Photocatalytic Hydrogen Production through Sensitizing TiO 2 via Novel Nanoclusters

Yanqi Wang,Jianrong Li,Qianqian Hu,Minting Hao,Yifan Liu,Liaokuo Gong,Renfu Li,Xiaoying Huang

DOI: https://doi.org/10.1021/acsami.1c09960

2021-08-17

Abstract:Improving the light utilization and electron–hole separation efficiency plays a central role in photocatalysis for converting light energy to hydrogen energy. Herein, for the first time, a stable, highly dispersible discrete T4 [Cd3In17Se31]5– cluster is developed as a novel photosensitizer to sensitize TiO2 for photocatalytic hydrogen production. Compared with pristine TiO2 (near zero) and the T4 clusters (19.5 μmol g–1 h–1) that exhibit low hydrogen evolution activities, the T4/TiO2 composite, constructed from traces of 0.127 mol % T4 cluster-sensitized TiO2, exhibits a dramatically improved photocatalytic activity of 328.2 μmol g–1 h–1, highlighting that the photocatalytic efficiency strongly correlates with that of the T4 cluster. In the meantime, the T4/TiO2 composites are highly stable, remaining robust in a long-time test of 50 h for photocatalytic hydrogen production. Ultrafast transient absorption spectroscopy, in combination with electrochemical analyses, steady-state and time-resolved photoluminescence, and density functional theory calculations, indicates that the T4 cluster not only serve as a photosensitizer to absorb visible light but also form a heterojunction between the interface of the T4 cluster and TiO2 to accelerate electron injection. This work highlights the great potential of the stable and highly dispersed discrete metal chalcogenide clusters as high-efficiency photosensitizers for converting solar energy to chemical energy.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsami.1c09960.Materials and characterization, DFT-based first principles calculations, tables for ICP, band positions, fitted time-resolved PL spectra, free energy of H*, and PXRD, mass spectrum, ζ-potential, photocatalytic stability, and TDOS (PDF)This article has not yet been cited by other publications.

materials science, multidisciplinary,nanoscience & nanotechnology
Zn-Assisted TiO2–x Photocatalyst with Efficient Charge Separation for Enhanced Photocatalytic Activities

Wenzhang Fang,Frederic Dappozze,Chantal Guillard,Yi Zhou,Mingyang Xing,Shashank Mishra,Stephane Daniele,Jinlong Zhang

DOI: https://doi.org/10.1021/acs.jpcc.7b03724

2017-01-01

The Journal of Physical Chemistry C

Abstract:A new Zn-assisted method has been employed to synthesize reduced TiO2(TiO2-x ) photocatalyst via a one-step hydrothermal process. In order to prevent the oxidation of TiO2-x in air, hydrofluoric acid is introduced in the preparative process for the stabilization of the Ti3+ and oxygen vacancies, as confirmed by low -temperature electron paramagnetic resonance. The obtained reduced TiO2 presents a wide-spectrum solar light absorption, including the near infrared region. In addition, {110}-{11} and {101}-(001) dual-facet exposures are generated by Cl- and F-based surface-terminated reagents, respectively. The generated {001} and {101} facets on reduced TiO2 samples act as hole and electron collectors, respectively, which contributes to the charge separation of the catalyst. Finally, the synergistic effect between Ti3+ doping and dual-facet exposure results in the high photocatalytic performance for degradation of Rhodamine B and formic acid.
Hierarchically organized nanostructured TiO2 for photocatalysis applications

F. Di Fonzo,C. S. Casari,V. Russo,M. F. Brunella,A. Li Bassi,C. E. Bottani,C.S. Casari,M.F. Brunella,C.E. Bottani

DOI: https://doi.org/10.48550/arXiv.0811.0466

2008-11-04

Materials Science

Abstract:A template-free process for the synthesis of nanocrystalline TiO2 hierarchical microstructures by reactive Pulsed Laser Deposition (PLD) is here presented. By a proper choice of deposition parameters a fine control over the morphology of TiO2 microstructures is demonstrated, going from classical compact/columnar films to a dense forest of distinct hierarchical assemblies of ultrafine nanoparticles (<10 nm), up to a more disordered, aerogel-type structure. Correspondingly, film density varies with respect to bulk TiO2 anatase, with a degree of porosity going from 48% to over 90%. These structures are stable with respect to heat treatment at 400 centigrade degrees, which results in crystalline ordering but not in morphological changes down to the nanoscale. Both as deposited and annealed films exhibit very promising photocatalytic properties, even superior to standard Degussa P25 powder, as demonstrated by the degradation of stearic acid as a model molecule. The observed kinetics are correlated to the peculiar morphology of the PLD grown material. We show that the 3D multi-scale hierarchical morphology enhances reaction kinetics and creates an ideal environment for mass transport and photon absorption, maximizing the surface area-to-volume ratio while at the same time providing readily accessible porosity through the large inter-tree spaces that act as distributing channels. The reported strategy provides a versatile technique to fabricate high aspect ratio 3D titania microstuctures through a hierarchical assembly of ultrafine nanoparticles. Beyond photocatalytic and catalytic applications, this kind of material could be of interest for those applications where high surface-to-volume and efficient mass transport are required at the same time.

Flower-shaped TiO2clusters for Highly Efficient Photocatalysis

Flower-shaped TiO<sub>2</sub>clusters for highly efficient photocatalysis

Self-assembly and Photocatalysis of Mesoporous TiO 2 Nanocrystal Clusters

Hydrothermal synthesis and photocatalytic activity of combination of flowerlike TiO2 and activated carbon fibers

A facile synthesis of hierarchical TiO<sub>2</sub>for dye adsorption and photocatalysis

A facile synthesis of hierarchical flower-like TiO<sub>2</sub> with enhanced photocatalytic activity

A facile synthesis of hierarchical flower-like TiO 2 with enhanced photocatalytic activity

A facile synthesis of hierarchical TiO2 for dye adsorption and photocatalysis

Au Cluster Anchored on TiO 2 /ti 3 C 2 Hybrid Composites for Efficient Photocatalytic CO 2 Reduction

Synthesis of nickel-doped titanium-oxo clusters with enhanced visible-light photocatalytic activity

The Controlled Synthesis of Flower-Like TiO2 Nanosheets with Enhanced Photocatalytic Performance

Hierarchical TiO2 Nanoflakes and Nanoparticles Hybrid Structure for Improved Photocatalytic Activity

Au cluster anchored on TiO2/Ti3C2 hybrid composites for efficient photocatalytic CO2 reduction

Hollow TiO2 Nanocages with Rubik-Like Structure for High-Performance Photocatalysts

[Ti8zr2o12(coo)16] Cluster: an Ideal Inorganic Building Unit for Photoactive Metal–Organic Frameworks

Large-scale Floated Single-Crystalline TiO2 Flower-Like Films: Synthesis Details and Applications

A 20-core copper( i ) nanocluster as electron–hole recombination inhibitor on TiO 2 nanosheets for enhancing photocatalytic H 2 evolution

Novel three-dimensional dandelion-like TiO2 structure with high photocatalytic activity

Boosting Visible-Light-Driven Photocatalytic Hydrogen Production through Sensitizing TiO 2 via Novel Nanoclusters

Zn-Assisted TiO2–x Photocatalyst with Efficient Charge Separation for Enhanced Photocatalytic Activities

Hierarchically organized nanostructured TiO2 for photocatalysis applications