Integrable Soliton Microcomb at Microwave Repetition Rates

Seung Hoon Lee,Dong Yoon Oh,Ki Youl Yang,Qi-Fan Yang,Xu Yi,Kerry Vahala

DOI: https://doi.org/10.1364/nlo.2017.nm1a.2

2017-01-01

Nonlinear Optics

Abstract:An integrated soliton frequency microcomb is demonstrated with a detectable repetition rate. The microcomb resonator features Q factors over 200 million and soliton microcomb pump powers are as low as 61 mW.

What problem does this paper attempt to address?

Electrically pumped photonic integrated soliton microcomb

Arslan S. Raja,Andrey S. Voloshin,Hairun Guo,Sofya E. Agafonova,Junqiu Liu,Alexander S. Gorodnitskiy,Maxim Karpov,Nikolay G. Pavlov,Erwan Lucas,Ramzil R. Galiev,Artem E. Shitikov,John D. Jost,Michael L. Gorodetsky,Tobias J. Kippenberg

DOI: https://doi.org/10.1038/s41467-019-08498-2

2018-11-22

Abstract:Optical frequency combs have revolutionized frequency metrology and timekeeping, and can be used in a wide range of optical technologies. Advances are under way that allow dramatic miniaturization of optical frequency combs using Kerr nonlinear optical microresonators, where broadband and coherent optical frequency combs can be generated from a continuous wave laser. Such `microcombs', provide a broad bandwidth with low power consumption, unprecedented form factor, wafer scale fabrication compatibility. For future high volume applications, integration and electrical pumping of soliton microcombs is essential. To date, however, microcombs still rely on optical pumping by bulk external laser modules that provide the required coherence, frequency agility and power levels for soliton formation. Electrically-driven, chip-integrated microcombs are inhibited by the high threshold power for soliton formation, typically exceeding the power of integrated silicon based lasers, and the required frequency agility for soliton initiation. Recent advances in high-Q Si3N4 microresonators suggest that electrically driven soliton microcombs are possible. Here we demonstrate an electrically-driven, chip-integrated soliton microcomb by coupling an indium phosphide (III-V) multiple-longitudinal-mode laser diode chip to a high-Q Si3N4 photonic integrated microresonator. We observe that self-injection locking of the laser diode to the microresonator, which is accompanied by a x1000 fold narrowing of the laser linewidth, can simultaneously initiate the formation of dissipative Kerr solitons. By tuning the current, we observe a transition from modulation instability, breather solitons to single soliton states. The system requires less than 1 Watt of electrical power, operates at electronically-detectable sub-100 GHz mode spacing and can fit in a volume of ca. 1cm3.

Optics,Applied Physics
High-speed tunable microwave-rate soliton microcomb

Yang He,Raymond Lopez-Rios,Usman A. Javid,Jingwei Ling,Mingxiao Li,Shixin Xue,Kerry Vahala,Qiang Lin

DOI: https://doi.org/10.1038/s41467-023-39229-3

IF: 16.6

2023-06-13

Nature Communications

Abstract:Soliton microcombs are a promising new approach for photonic-based microwave signal synthesis. To date, however, the tuning rate has been limited in microcombs. Here, we demonstrate the first microwave-rate soliton microcomb whose repetition rate can be tuned at a high speed. By integrating an electro-optic modulation element into a lithium niobate comb microresonator, a modulation bandwidth up to 75 MHz and a continuous frequency modulation rate up to 5.0 × 10 14 Hz/s are achieved, several orders-of-magnitude faster than existing microcomb technology. The device offers a significant bandwidth of up to tens of gigahertz for locking the repetition rate to an external microwave reference, enabling both direct injection locking and feedback locking to the comb resonator itself without involving external modulation. These features are especially useful for disciplining an optical voltage-controlled oscillator to a long-term reference and the demonstrated fast repetition rate control is expected to have a profound impact on all applications of frequency combs.

multidisciplinary sciences
Soliton Frequency Comb at Microwave Rates in A High-Q Silica Microresonator

Xu Yi,Qi-Fan Yang,Ki Youl Yang,Myoung-Gyun Suh,Kerry Vahala

DOI: https://doi.org/10.1364/optica.2.001078

IF: 10.4

2015-01-01

Optica

Abstract:Frequency combs are having a broad impact on science and technology because they provide a way to coherently link radio/microwave-rate electrical signals with optical-rate signals derived from lasers and atomic transitions. Integrating these systems on a photonic chip would revolutionize instrumentation, time keeping, spectroscopy, navigation, and potentially create new mass-market applications. A key element of such a system-on-a-chip will be a mode-locked comb that can be self-referenced. The recent demonstration of soliton mode locking in crystalline and silicon nitride microresonators has provided a way to both mode lock and generate femtosecond time-scale pulses. Here, soliton mode locking is demonstrated in high-Q silica resonators. The resonators produce low-phase-noise soliton pulse trains at readily detectable pulse rates—two essential properties for the operation of frequency combs. A method for the long-term stabilization of the solitons is also demonstrated, and is used to test the theoretical dependence of the comb power, efficiency, and soliton existence power on the pulse width. The influence of the Raman process on the soliton existence power and efficiency is also observed. The resonators are microfabricated on silicon chips and feature reproducible modal properties required for soliton formation. A low-noise and detectable pulse rate soliton frequency comb on a chip is a significant step towards a fully integrated frequency comb system.
Towards visible soliton microcomb generation

Seung Hoon Lee,Dong Yoon Oh,Qi-Fan Yang,Boqiang Shen,Heming Wang,Ki Youl Yang,Yu-Hung Lai,Xu Yi,Xinbai Li,Kerry Vahala

DOI: https://doi.org/10.1038/s41467-017-01473-9

IF: 16.6

2017-11-03

Nature Communications

Abstract:Frequency combs have applications that extend from the ultra-violet into the mid-infrared bands. Microcombs, a miniature and often semiconductor-chip-based device, can potentially access most of these applications, but are currently more limited in spectral reach. Here, we demonstrate mode-locked silica microcombs with emission near the edge of the visible spectrum. By using both geometrical and mode-hybridization dispersion control, devices are engineered for soliton generation while also maintaining optical Q factors as high as 80 million. Electronics-bandwidth-compatible (20 GHz) soliton mode locking is achieved with low pumping powers (parametric oscillation threshold powers as low as 5.4 mW). These are the shortest wavelength soliton microcombs demonstrated to date and could be used in miniature optical clocks. The results should also extend to visible and potentially ultra-violet bands.

multidisciplinary sciences
Integrated Turnkey Soliton Microcombs

Boqiang Shen,Lin Chang,Junqiu Liu,Heming Wang,Qi-Fan Yang,Chao Xiang,Rui Ning Wang,Jijun He,Tianyi Liu,Weiqiang Xie,Joel Guo,David Kinghorn,Lue Wu,Qing-Xin Ji,Tobias J. Kippenberg,Kerry Vahala,John E. Bowers

DOI: https://doi.org/10.1038/s41586-020-2358-x

IF: 64.8

2020-01-01

Nature

Abstract:Optical frequency combs have a wide range of applications in science and technology 1 . An important development for miniature and integrated comb systems is the formation of dissipative Kerr solitons in coherently pumped high-quality-factor optical microresonators 2 – 9 . Such soliton microcombs 10 have been applied to spectroscopy 11 – 13 , the search for exoplanets 14 , 15 , optical frequency synthesis 16 , time keeping 17 and other areas 10 . In addition, the recent integration of microresonators with lasers has revealed the viability of fully chip-based soliton microcombs 18 , 19 . However, the operation of microcombs requires complex startup and feedback protocols that necessitate difficult-to-integrate optical and electrical components, and microcombs operating at rates that are compatible with electronic circuits—as is required in nearly all comb systems—have not yet been integrated with pump lasers because of their high power requirements. Here we experimentally demonstrate and theoretically describe a turnkey operation regime for soliton microcombs co-integrated with a pump laser. We show the appearance of an operating point at which solitons are immediately generated by turning the pump laser on, thereby eliminating the need for photonic and electronic control circuitry. These features are combined with high-quality-factor Si 3 N 4 resonators to provide microcombs with repetition frequencies as low as 15 gigahertz that are fully integrated into an industry standard (butterfly) package, thereby offering compelling advantages for high-volume production.
Octave-spanning Soliton Microcomb in Silica Microdisk Resonators

Jiaxin Gu,Xuan LI,Kai Qi,Keren Pu,Zhixuan LI,Fan Zhang,Tao LI,Zhenda Xie,Min Xiao,Xiaoshun Jiang

DOI: https://doi.org/10.1364/ol.479251

IF: 3.6

2023-01-01

Optics Letters

Abstract:We demonstrate a chip-based octave-spanning soliton microcomb in a whispering gallery mode microresonator platform. By fabricating a silica microdisk resonator and optimizing its dispersion with dry etching, we achieve an octave-spanning single-soliton microcomb with a repetition rate of ∼670 GHz at an optical pump power of 162.6 mW. Also, two dispersive waves at the end of the spectrum are observed to extend the comb spectral range and improve the comb power.
Counter-propagating Soliton Frequency Microcombs

Qi-Fan Yang,Xu Yi,Ki Youl Yang,Kerry Vahala

DOI: https://doi.org/10.1364/cleo_si.2018.sw4m.6

2018-01-01

Abstract:Counter-propagating dissipative Kerr solitons are generated in a single silica microresonator. A relative soliton rate-locking phenomenon is observed and it provides dual-comb pulse streams with different repetition rates and a high-level of mutual coherence.
Atom-referenced on-chip soliton microcomb

Rui Niu,Shuai Wan,Tian-Peng Hua,Wei-Qiang Wang,Zheng-Yu Wang,Jin Li,Zhu-Bo Wang,Ming Li,Zhen Shen,Y. R. Sun,Shui-Ming Hu,B. E. Little,S. T. Chu,Wei Zhao,Guang-Can Guo,Chang-Ling Zou,Yun-Feng Xiao,Wen-Fu Zhang,Chun-Hua Dong

2023-05-05

Abstract:For the applications of the frequency comb in microresonators, it is essential to obtain a fully frequency-stabilized microcomb laser source. Here, we demonstrate an atom-referenced stabilized soliton microcomb generation system based on the integrated microring resonator. The pump light around $1560.48\,\mathrm{nm}$ locked to an ultra-low-expansion (ULE) cavity, is frequency-doubled and referenced to the atomic transition of $^{87}\mathrm{Rb}$. The repetition rate of the soliton microcomb is injection-locked to an atomic-clock-stabilized radio frequency (RF) source, leading to mHz stabilization at $1$ seconds. As a result, all comb lines have been frequency-stabilized based on the atomic reference and could be determined with very high precision reaching $\sim18\,\mathrm{Hz}$ at 1 second, corresponding to the frequency stability of $9.5\times10^{-14}$. Our approach provides an integrated and fully stabilized microcomb experiment scheme with no requirement of $f-2f$ technique, which could be easily implemented and generalized to various photonic platforms, thus paving the way towards the portable and ultraprecise optical sources for high precision spectroscopy.

Optics,Instrumentation and Detectors
Soliton Microcomb Operation to 778 Nm

Q. -F. Yang,S. H. Lee,D. Y. Oh,B. Shen,H. Wang,K. Y. Yang,Y. H. Lai,X. Yi,K. Vahala

DOI: https://doi.org/10.1109/ipcon.2017.8116040

2017-01-01

Abstract:Soliton microcombs are demonstrated at both 1064 nm and 778 nm by dispersion-engineering on-chip silica resonators. These are the shortest wavelength soliton microcombs demonstrated to date and have potential applications in optical clocks and metrology.
Octave soliton microcombs in lithium niobate microresonators

Pi-Yu Wang,Shuai Wan,Rui Ma,Wei Li,Fang Bo,Guang-Can Guo,Chun-Hua Dong

DOI: https://doi.org/10.1364/OL.514893

2024-04-01

Abstract:Soliton microcombs are regarded as an ideal platform for applications such as optical communications, optical sensing, low-noise microwave sources, optical atomic clocks, and frequency synthesizers. Many of these applications require a broad comb spectrum that covers an octave, essential for implementing the f - 2f self-referencing techniques. In this work, we have successfully generated an octave-spanning soliton microcomb based on a z-cut thin-film lithium niobate (TFLN) microresonator. This achievement is realized under on-chip optical pumping at 340 mW and through extensive research into the broadening of dual dispersive waves (DWs). Furthermore, the repetition rate of the octave soliton microcomb is accurately measured using an electro-optic comb generated by an x-cut TFLN racetrack microresonator. Our results represent a crucial step toward the realization of practical, integrated, and fully stabilized soliton microcomb systems based on TFLN.
Generation of high-stability solitons at microwave rates on a silicon chip

Xu Yi,Qi-Fan Yang,Ki Youl Yang,Myoung-Gyun Suh,Kerry Vahala

DOI: https://doi.org/10.48550/arXiv.1508.00170

2015-08-01

Optics

Abstract:Because they coherently link radio/microwave-rate electrical signals with optical-rate signals derived from lasers and atomic transitions, frequency combs are having a remarkably broad impact on science and technology. Integrating these systems on a photonic chip would revolutionize instrumentation, time keeping, spectroscopy, navigation and potentially create new mass-market applications. A key element of such a system-on-a-chip will be a mode-locked comb that can be self-referenced. The recent demonstration of soliton pulses from a microresonator has placed this goal within reach. However, to provide the requisite link between microwave and optical rate signals soliton generation must occur within the bandwidth of electronic devices. So far this is possible in crytalline devices, but not chip-based devices. Here, a monolithic comb that generates electronic-rate soliton pulses is demonstrated.
Soliton microcombs in silicon-carbide microresonators

Chengli Wang,Jin Li,Ailun Yi,Zhiwei Fang,Liping Zhou,Zhe Wang,Rui Niu,Jiaxiang Zhang,Ya Cheng,Junqiu Liu,Chun-Hua Dong,Xin Ou

DOI: https://doi.org/10.1109/tencon55691.2022.9977969

2022-01-01

Abstract:We demonstrate SiC-based soliton microcombs operated at room temperature - a key step for integrated SiC nonlinear photonics for frequency metrology applications. We have successfully routed and switched among different soliton states using an auxiliary laser to optically counteract the thermo-optic effect. In addition to single soliton generation, we further observe a wideband comb spectra translation from near-infrared to visible via the second-order nonlinearity, key for the realization of on-chip f -to-2f self-referencing,
Integrated Turnkey Soliton Microcombs Operated at CMOS Frequencies

Boqiang Shen,Lin Chang,Junqiu Liu,Heming Wang,Qi-Fan Yang,Chao Xiang,Rui Ning Wang,Jijun He,Tianyi Liu,Weiqiang Xie,Joel Guo,David Kinghorn,Lue Wu,Qing-Xin Ji,Tobias J. Kippenberg,Kerry Vahala,John E. Bowers

DOI: https://doi.org/10.1364/cleo_si.2020.sf3o.4

2020-01-01

Abstract:We experimentally discovered and theoretically explain a novel turnkey regime for operation of soliton microcombs, wherein a new operating point enables the direct access of the soliton state by simple turn-on of the pump laser.
Microresonator-referenced soliton microcombs with zeptosecond-level timing noise

Xing Jin,Zhenyu Xie,Xiangpeng Zhang,Hanfei Hou,Fangxing Zhang,Xuanyi Zhang,Lin Chang,Qihuang Gong,Qi-Fan Yang

2024-01-23

Abstract:Optical frequency division relies on optical frequency combs to coherently translate ultra-stable optical frequency references to the microwave domain. This technology has enabled microwave synthesis with ultralow timing noise, but the required instruments are too bulky for real-world applications. Here, we develop a compact optical frequency division system using microresonator-based frequency references and comb generators. The soliton microcomb formed in an integrated Si$_3$N$_4$ microresonator is stabilized to two lasers referenced to an ultrahigh-$Q$ MgF$_2$ microresonator. Photodetection of the soliton pulse train produces 25 GHz microwaves with absolute phase noise of -141 dBc/Hz (547 zs Hz$^{-1/2}$) at 10 kHz offset frequency. The synthesized microwaves are tested as local oscillators in jammed communication channels, resulting in improved fidelity compared with those derived from electronic oscillators. Our work demonstrates unprecedented coherence in miniature microwave oscillators, providing key building blocks for next-generation timekeeping, navigation, and satellite communication systems.

Optics,Applied Physics
Micro‐Resonator Soliton Generated Directly with a Diode Laser

Nicolas Volet,Xu Yi,Qi-Fan Yang,Eric J. Stanton,Paul A. Morton,Ki Youl Yang,Kerry J. Vahala,John E. Bowers

DOI: https://doi.org/10.1002/lpor.201700307

2018-01-01

Laser & Photonics Review

Abstract:An external-cavity diode laser is reported with ultralow noise, high power coupled to a fiber, and fast tunability. These characteristics enable the generation of an optical frequency comb in a silica micro-resonator with a single-soliton state. Neither an optical modulator nor an amplifier was used in the experiment. This demonstration greatly simplifies the soliton generation setup and represents a significant step forward to a fully integrated soliton comb system.
Intracavity characterization of micro-comb generation in the single-soliton regime

Pei-Hsun Wang,Jose A. Jaramillo-Villegas,Yi Xuan,Xiaoxiao Xue,Chengying Bao,Daniel E. Leaird,Minghao Qi,Andrew M. Weiner

DOI: https://doi.org/10.48550/arXiv.1603.03154

2016-03-10

Abstract:Soliton formation in on-chip micro-comb generation balances cavity dispersion and nonlinearity and allows coherent, low-noise comb operation. We study the intracavity waveform of an on-chip microcavity soliton in a silicon nitride microresonator configured with a drop port. Whereas combs measured at the through port are accompanied by a very strong pump line which accounts for >99% of the output power, our experiments reveal that inside the microcavity, most of the power is in the soliton. Time-domain measurements performed at the drop port provide information that directly reflects the intracavity field. Data confirm a train of bright, close to bandwidth-limited pulses, accompanied by a weak continuous wave (CW) background with a small phase shift relative to the comb.

Optics
Power-efficient soliton microcombs

Óskar B. Helgason,Marcello Girardi,Zhichao Ye,Fuchuan Lei,Jochen Schröder,Victor Torres Company

DOI: https://doi.org/10.1038/s41566-023-01280-3

2022-02-19

Abstract:Laser frequency combs are enabling some of the most exciting scientific endeavours in the 21st century, ranging from the development of optical clocks to the calibration of the astronomical spectrographs used for searching Earth-like exoplanets. Today, dissipative Kerr solitons generated in microresonators offer the prospect of attaining frequency combs in miniaturized systems by capitalizing on advances in photonic integration. Most of the applications based on soliton microcombs rely on tuning a continuous-wave laser into a longitudinal mode of a microresonator whose dimensions are engineered to display anomalous dispersion at the pump laser frequency. In this configuration, however, nonlinear physics precludes from attaining dissipative Kerr solitons with high power conversion efficiency, with typical comb powers amounting to ~1% of the available laser power. Here, we demonstrate that this fundamental limitation can be overcome by inducing a controllable frequency shift to a selected cavity resonance. Experimentally, we realize this shift using two linearly coupled anomalous-dispersion microresonators (a photonic molecule), resulting in a coherent dissipative Kerr soliton with a conversion efficiency exceeding 50% and excellent line spacing stability. We describe the physical soliton dynamics in this configuration, and discover the system displays unusual characteristics, such as the possibility to backwards initiate solitons and stable operation with a blue detuned pump laser. By optimizing the microcomb power available on chip, these results facilitate the practical implementation of a scalable integrated photonic architecture for energy-efficient applications.

Optics,Applied Physics
Atom-referenced and Stabilized Soliton Microcomb

Rui Niu,Shuai Wan,Tian-Peng Hua,Wei-Qiang Wang,Zheng-Yu Wang,Jin Li,Zhu-Bo Wang,Ming Li,Zhen Shen,Yu Robert Sun,Shui-Ming Hu,Brent E. Little,Sai Tak Chu,Wei Zhao,Guang-Can Guo,Chang-Ling Zou,Yun-Feng Xiao,Wen-Fu Zhang,Chun-Hua Dong

DOI: https://doi.org/10.1007/s11433-023-2234-6

2024-01-01

Abstract:For the applications of the frequency comb in microresonators, it is essential to obtain a fully frequency-stabilized microcomb laser source. In this study, we present a system for generating a fully atom-referenced stabilized soliton microcomb. The pump light around 1560.48 nm is locked to an ultra-low-expansion (ULE) cavity. This pump light is then frequency-doubled and referenced to the atomic transition of 87 Rb. The repetition rate of the soliton microcomb is injection-locked to an atomic-clock-stabilized radio frequency (RF) source, leading to mHz stabilization at 1 s. As a result, all comb lines have been frequency-stabilized based on the atomic reference and the ULE cavity, achieving a very high precision of approximately 18 Hz at 1 s, corresponding to the frequency stability of 9.5 × 10 −14 . Our approach provides a fully stabilized microcomb experiment scheme with no requirement of f -2 f technique, which could be easily implemented and generalized to various photonic platforms, thus paving the way towards the ultraprecise optical sources for high precision spectroscopy.
Nanophotonic soliton-based microwave synthesizers

Junqiu Liu,Erwan Lucas,Arslan S. Raja,Jijun He,Johann Riemensberger,Rui Ning Wang,Maxim Karpov,Hairun Guo,Romain Bouchand,Tobias J. Kippenberg

DOI: https://doi.org/10.1038/s41566-020-0617-x

2019-11-25

Abstract:Microwave photonic technologies, which upshift the carrier into the optical domain to facilitate the generation and processing of ultrawide-band electronic signals at vastly reduced fractional bandwidths, have the potential to achieve superior performance compared to conventional electronics for targeted functions. For microwave photonic applications such as filters, coherent radars, subnoise detection, optical communications and low-noise microwave generation, frequency combs are key building blocks. By virtue of soliton microcombs, frequency combs can now be built using CMOS compatible photonic integrated circuits, operated with low power and noise, and have already been employed in system-level demonstrations. Yet, currently developed photonic integrated microcombs all operate with repetition rates significantly beyond those that conventional electronics can detect and process, compounding their use in microwave photonics. Here we demonstrate integrated soliton microcombs operating in two widely employed microwave bands, X- and K-band. These devices can produce more than 300 comb lines within the 3-dB-bandwidth, and generate microwave signals featuring phase noise levels below 105 dBc/Hz (140 dBc/Hz) at 10 kHz (1 MHz) offset frequency, comparable to modern electronic microwave synthesizers. In addition, the soliton pulse stream can be injection-locked to a microwave signal, enabling actuator-free repetition rate stabilization, tuning and microwave spectral purification, at power levels compatible with silicon-based lasers (<150 mW). Our results establish photonic integrated soliton microcombs as viable integrated low-noise microwave synthesizers. Further, the low repetition rates are critical for future dense WDM channel generation schemes, and can significantly reduce the system complexity of photonic integrated frequency synthesizers and atomic clocks.

Optics,Applied Physics
Brillouin-Kerr soliton frequency combs in an optical microresonator

Yan Bai,Menghua Zhang,Qi Shi,Shulin Ding,Zhenda Xie,Xiaoshun Jiang,Min Xiao

DOI: https://doi.org/10.1103/PhysRevLett.126.063901

2020-08-15

Abstract:By generating a Brillouin laser in an optical microresonator, we realize a soliton Kerr microcomb through exciting the Kerr frequency comb using the generated Brillouin laser in the same cavity. The intracavity Brillouin laser pumping scheme enables us to access the soliton states with a blue-detuned input pump. Due to the ultra-narrow linewidth and the low-noise properties of the generated Brillouin laser, the observed soliton microcomb exhibits narrow-linewidth comb lines and stable repetition rate even by using a diode laser with relatively broad linewidth. Also, we demonstrate a low-noise microwave signal with phase noise levels of -24 dBc/Hz at 10 Hz, -111 dBc/Hz at 10 kHz, and -147 dBc/Hz at 1 MHz offsets for a 11.14 GHz carrier with only a free-running input pump. The easy operation of the Brillouin-Kerr soliton microcomb with excellent performance makes our scheme promising for practical applications.

Optics

Integrable Soliton Microcomb at Microwave Repetition Rates

Electrically pumped photonic integrated soliton microcomb

High-speed tunable microwave-rate soliton microcomb

Soliton Frequency Comb at Microwave Rates in A High-Q Silica Microresonator

Towards visible soliton microcomb generation

Integrated Turnkey Soliton Microcombs

Octave-spanning Soliton Microcomb in Silica Microdisk Resonators

Counter-propagating Soliton Frequency Microcombs

Atom-referenced on-chip soliton microcomb

Soliton Microcomb Operation to 778 Nm

Octave soliton microcombs in lithium niobate microresonators

Generation of high-stability solitons at microwave rates on a silicon chip

Soliton microcombs in silicon-carbide microresonators

Integrated Turnkey Soliton Microcombs Operated at CMOS Frequencies

Microresonator-referenced soliton microcombs with zeptosecond-level timing noise

Micro‐Resonator Soliton Generated Directly with a Diode Laser

Intracavity characterization of micro-comb generation in the single-soliton regime

Power-efficient soliton microcombs

Atom-referenced and Stabilized Soliton Microcomb

Nanophotonic soliton-based microwave synthesizers

Brillouin-Kerr soliton frequency combs in an optical microresonator