Abstract:This paper has explored an ultra-low-power design of two 60-GHz direct-conversion receivers in a 65-nm CMOS process for single-channel and multi-channel applications under the IEEE 802.15.3c standard, respectively. One subthreshold biasing 0.4-V transconductance mixer is designed with a compact quadrature hybrid coupler (160 μm × 210 μm with measured 3-dB intrinsic loss) in receivers to achieve low power (8 mW for single channel and 12.4 mW for multi-channel) and high gain (55 dB for single channel and 62-dB for multi-channel). One three-stage low-noise amplifier employs high- Q passive matchings. A double-layer-stacked inductor is utilized for matching in the single-channel receiver and a high-impedance transmission line is utilized for matching in the multi-channel receiver, respectively. In addition, one new modified Cherry-Hooper amplifier is applied for the variable-gain amplifier design to achieve high gain-bandwidth product and high power efficiency. The single-channel receiver is implemented with 0.34- mm2 chip area. It is measured with a power consumption of 8 mW, a minimum single-sideband noise figure (NF) of 4.9 dB, a 3-dB bandwidth of 3.5 GHz, and a maximum conversion gain of 55 dB. The multi-channel receiver is implemented with 0.56- mm2 chip area. It is measured with a power consumption of 12.4 mW, a 3-dB bandwidth of 8 GHz (59.5 ~ 67.5 GHz), and a maximum conversion gain of 62 dB. The measurement results show that the two demonstrated 60-GHz direct-conversion receivers can achieve high gain and low NF with ultra-low power in 65-nm CMOS.

A Fully Integrated Reconfigurable Low-Power Sub-GHz Transceiver for 802.11ah in 65nm CMOS

A compact dual-band direct-conversion CMOS transceiver for 802.11a/b/g WLAN

A 0.6-V Zero-IF/Low-IF Receiver with Integrated Fractional-N Synthesizer for 2.4-Ghz ISM-Band Applications.

A Sub-GHz Low-Power Transceiver with PAPR-tolerant Power Amplifier for 802.11ah Applications

A 0.5-8Ghz Reconfigurable CMOS RF Receiver Front-end for CR and DPA Applications

A Sub-GHz CMOS Low-IF Receiver for Lot Applications

A 11 Mw 2.4 GHz 0.18 Μm CMOS Transceivers for Wireless Sensor Networks

A 0.6V 32.5mw Highly Integrated Receiver for 2.4ghz ISM-Band Applications

A 54-67-ghz Low-Power Highly-Integrated Transceiver in 65-Nm CMOS for FMCW Radar Applications

20 . 6 A 0 . 6 V 32 . 5 mW Highly Integrated Receiver for 2 . 4 GHz ISM-Band Applications

A Fully Integrated CMOS 60-Ghz Transceiver for IEEE802.11ad Applications.

A Lower Power Reconfigurable Multi-Band Transceiver for Short-Range Communication

A Fully-Integrated Reconfigurable Dual-Band Transceiver for Short Range Wireless Communications in 180 Nm CMOS.

A Low-Power Monolithic CMOS Transceiver for 802.11b Wireless LANs

A Reconfigurable Sliding-IF Transceiver for 400 MHz/2.4 GHz IEEE 802.15.6/ZigBee WBAN Hubs With Only 21% Tuning Range VCO

Design of Ultra-Low-Power 60-Ghz Direct-Conversion Receivers in 65-Nm CMOS

A 0.1∼4GHz receiver and 0.1∼6GHz transmitter with reconfigurable 10∼100MHz signal bandwidth in 65nm CMOS

A Low-Power Reconfigurable Multi-Band Sliding-If Transceiver For Wban Hubs In 0.18 Mu M Cmos

Two 180nm CMOS Wireless Transceivers for IoT Applications

A Low-Power Monolithic Reconfigurable Direct-Conversion Receiver RF Front-End for 802.11a/b/g Applications

A fully-integrated reconfigurable dual-band transceiver for short range wireless communication in 180nm CMOS