Experimental Study on Steady-State Heat Transfer Characteristics of the Nozzle-atomized Dispersed Flow
Yuhao Liu,Dawei Cui,Jiming Lin,Junhong Liu,Chao Li,Shanfang Huang,Zhenqin Xiong,Huaqiang Yin
DOI: https://doi.org/10.1016/j.applthermaleng.2018.05.067
IF: 6.4
2018-01-01
Applied Thermal Engineering
Abstract:The fast neutron reactor, one of the promising generation-IV nuclear reactors, particularly requires its coolant to have a strong capacity of transferring heat allied with a weak ability of moderating neutrons, and thus a new scheme of applying the dispersed flow as the coolant is presented in this study. Such a flow was generated by injecting subcooled droplets into the overheated steam with the help of a nozzle, simply referred to as the nozzle-atomized dispersed flow. The obtained heat transfer coefficients maintain high values, vary from 40 to 90 kW/m(2)/K and are greatly improved as high as 50 times compared to those of the traditional annular-mist flow. The result implies that the nozzle-atomized dispersed flow, especially in the saturated boiling region, meets the heat transfer requirements of the coolant for a fast neutron reactor. Through meticulous analyses, appropriately higher inlet pressure, increased wall heat flux, larger inlet quality, boosted mass flow rate and shorter mix chamber length were found to either reinforce the heat transfer process or shorten the boiling regions along the tube. The standard database on hydrodynamic and heat transfer characteristics of the nozzle-atomized dispersed flow under violent conditions at the pressure of similar to 7 MPa and the mass flow rate of similar to 250 kg/m(2) /s was established and laid foundations for further engineering design.